|
|
|
|
|
|
1970-1981 QA1 Shock, Front Single Adjustable Coil-Over Pro Coil Shock Only
|
|
|
For your 70-81 model, QA1 offers its Pro Coil single adjustable shock for the daily driver. Compression and rebound adjustment is made easy with one easy-to-reach knob for simultaneous adjustment. With 18 valving options, you’re able to fine tune your suspension for the ride you’re looking for. Shock is sold individually and without spring.
PART NUMBER: SUS-1117BH
|
|
|
|
|
|
|
|
|
|
1970-1981 QA1 Shock, Front Single Adjustable Stocker Star "R" Series
|
|
|
QA1's Drag "R" Series Stocker Star shock absorbers are designed with drag racing in mind. With 18 valving options for rebound and a firm compression, you can't go wrong. Sold each.
PART NUMBER: SUS-1112C
|
|
|
|
|
|
|
|
|
|
"383" Fender Emblem
|
|
|
"383" fender emblem for all models. Sold each.
Part Number: EMB-71
|
|
|
|
|
|
|
|
|
|
"396" Fender Emblems
|
|
|
"396" fender emblems for all models. Excellent quality! Sold as a matched pair.
Part Number: EMB-90
|
|
|
|
|
|
|
|
|
|
"427" Fender Emblem
|
|
|
"427" fender emblem for all models. Sold each.
Part Number: EMB-72
|
|
|
|
|
|
|
|
|
|
"454" Custom Emblems
|
|
|
"454" emblems in red. Will work for all model years. Sold as a pair. Studs on the back are designed for 69 fender location, but you can mount anywhere you like.
Part Number: EMB-156
|
|
|
|
|
|
|
|
|
|
"502" Engine Size Custom Emblems in Red
|
|
|
New custom "502" emblems in red. These will look great on your fender or anywhere you like. Sold in a matched pair.
Part Number: EMB-157
|
|
|
|
|
|
|
|
|
|
"Easy On" Vinyl or Decal Application Gel Solution
|
|
|
Easy On is a water-soluble gel designed to temporarily suspend the tack of pressure sensitive vinyl film adhesive and minimize the appearance of air bubbles during installation. Easy On should be used when applying graphics in extreme heat (above 90F), installing graphics that require exact positioning, or when applying large, hard-to-handle graphics. Unlike soap and water, no filmy residue remains after the solution dries. Sold by the pint.
Part Number: PAI-39
|
|
|
|
|
|
|
|
|
|
"Echoes of Norwood: General Motors Automobile Production During The Twentieth Century" Book by Phillip Borris
|
|
|
Echoes of Norwood. Copyright (c) 2013 by Phillip Borris. The book that goes inside a General Motors Corporation Automotive Assembly Plant, all the way to the factory floor. Here is the story of the men and women of the Norwood Assembly Plant, where most all 67 - 87 firebirds were produced. Profiles all the way from the first car produced in 1923 to the 8 millionth and the last car off the line in 1987. From the "B" body to the "F" car in never before revealed photographs, production data, and personal recollections, all providing a rare glimpse into the inner workings of the automotive industry during the halcyon era of domestic automotive production.
Part Number: LIT-119
|
|
|
|
|
|
|
|
|
|
"Loud Pipes Save Lives" License Plate
|
|
|
"Loud Pipes Save Lives" license plate.
Part Number: GIF-170A
|
|
|
|
|
|
|
|
|
|
"Metal Mask" Single Component Polyurethane Paint Coating - Bare Metal Gray Finish, 1 Pint
|
|
|
Metal Mask is a single component polyurethane coating that makes any metal surface look exactly like new bare metal.
Metal Mask is non-porous and will not crack, chip, or peel when properly applied. It has great scratch and abrasion resistance and its not sensitive to UV light. Follow the directions carefully and you will be rewarded with the finest protective coating for metal available anywhere!
Uses include undercarriage components, gas tanks, steering components, hood latches, hinges, and springs.
PART NUMBER: PAI-41
|
|
|
|
|
|
|
|
|
|
"Metal Mask" Single Component Polyurethane Paint Coating - Bare Metal Gray Finish, 1 Quart
|
|
|
Metal Mask is a single component polyurethane coating that makes any metal surface look exactly like new bare metal.
Metal Mask is non-porous and will not crack, chip, or peel when properly applied. It has great scratch and abrasion resistance and its not sensitive to UV light. Follow the directions carefully and you will be rewarded with the finest protective coating for metal available anywhere!
Uses include undercarriage components, gas tanks, steering components, hood latches, hinges, and springs.
PART NUMBER: PAI-40
|
|
|
|
|
|
|
|
|
|
1156 LED Backup Light Bulb, Ultra Bright WHITE Single Filament, Each
|
Our Price: $19.95 Sale Price: $17.95 You save $2.00!
|
|
|
1156 LED Backup Light Bulb, Ultra Bright WHITE Single Filament, Each
This new WHITE LED bulb has 18 LEDs per bulb for your Firebird. This 1156 single-contact bulb creates a 360° viewing angle for better allover light emission with reduced hot spots. Easy plug-and-play installation, just twist to lock in place. The energy-efficient bulb operates within a 12V DC range and is designed to last 30,000 hours on your car, truck, SUV, or van, 25 times longer than incandescent bulbs. Super Brightness: The luminance is 2 to 3 times stronger than traditional LED bulb. Replaces any standard 1156 bulb. This bulb will replace the standard backup bulbs. Sold each, order yours today!!
Single Filament Bulb
PART NUMBER: LIG-999
|
|
|
|
|
|
|
|
|
|
1157 LED Stop / Turn / Park Light Bulb, Ultra Bright AMBER Dual Filament, Each
|
Our Price: $19.95 Sale Price: $17.95 You save $2.00!
|
|
|
1157 LED Stop / Turn / Park Light Bulb, Ultra Bright AMBER Dual Filament, Each
This new AMBER LED bulb has 18 LEDs per bulb for your Firebird. This 1156 dual-contact bulb creates a 360° viewing angle for better allover light emission with reduced hot spots. Easy plug-and-play installation, just twist to lock in place. The energy-efficient bulb operates within a 12V DC range and is designed to last 30,000 hours on your car, truck, SUV, or van, 25 times longer than incandescent bulbs. Super Brightness: The luminance is 2 to 3 times stronger than traditional LED bulb. Replaces any standard 1156 bulb. This bulb will replace the stop and turn tail light bulbs and the front park light / turn signal bulbs. Sold each, order yours today!!
Dual Filament Bulb
PART NUMBER: LIG-901
|
|
|
|
|
|
|
|
|
|
1157 Ultra Bright LED Light Bulb ( White )
|
|
|
This new LED bulb has 14 LEDs with 3 chips per bulb. Super Brightness: The luminance is 2 to 3 times stronger than traditional LED bulb. Replaces any standard 1157 bulb. This bulb will replace the stop and turn tail light bulbs and the front park light / turn signal bulbs. Sold each, order yours today!!
Dual Filament Bulb
PART NUMBER: LIG-900
|
|
|
|
|
|
|
|
|
|
14 Inch Honeycomb Wheel Rim
|
|
Please call for availability
|
|
|
Rare original GM honeycomb wheel for your bird. Correct 14 inch diameter and 7 inch width, just like factory. This honey comb design looks great on any model you choose. Currently available as a used GM item only. The one you will receive will look similar to the one pictured, above average with no major issues. Sold as each.
Part Number: WHE-2016
|
|
|
|
|
|
|
|
|
|
14 Inch Honeycomb Wheel Trim Ring, Each
|
|
|
New correct style trim ring for your bird. Exact fit for all 14 inch diameter honey comb wheel rims. Factory designed lip shape and fit. Sold as each.
Please Note: There are dimples or imperfections where the stainless rolls over during manufacturing. They look great from 10 feet away but wavey up close. A strong 7 on a 1 to 10 scale.
Part Number: WHE-2010
|
|
|
|
|
|
|
|
|
|
14 Inch Honeycomb Wheel Trim Rings, Set of Four
|
|
|
New correct style trim rings for your Firebird. Exact fit for all 14 inch diameter honey comb wheel rims. Factory designed lip shape and fit. Sold as a complete set of 4.
Please Note: There are dimples or imperfections where the stainless rolls over during manufacturing. They look great from 10 feet away but wavey up close. A strong 7 on a 1 to 10 scale.
Part Number: WHE-2011
|
|
|
|
|
|
|
|
|
|
14 X 6 Rally Wheel Trim Rings, Set of 4
|
|
|
New set of four 14 x 6 Rally wheel trim rings. Inner clips go all the way around the ring. Outer lip is rounded and the valve stem opening is "U" shaped. Replaces GM part number 475019. Correct wheel application shown is for reference only.
Part Number: WHE-10A
|
|
|
|
|
|
|
|
|
|
14 X 7 Rally Wheel Trim Ring, Each
|
|
|
New correct size trim ring for your Pontiac rally wheel. Exact stainless steel finish and fit. Works great for all 14" x 7" rims. Replaces GM part number 9796919. Picture of the correct wheel these fit is for reference only.
Part Number: WHE-20
|
|
|
|
|
|
|
|
|
|
14 X 7 Rally Wheel Trim Rings, Set of Four
|
|
|
14 X 7 Rally Wheel Trim Rings, Set of Four
New correct size trim rings for your Pontiac rally wheel. Exact stainless steel finish and fit. Works great for all 14" x 7" rims. Replaces GM part number 9796919. Picture of the correct wheel these fit is for reference only. Sold as a set of four.
Part Number: WHE-21
|
|
|
|
|
|
|
|
|
|
14 x 7 Stock Steelie COPO Style Dog Dish Wheel, Rim Only
|
|
|
14 x 7 Stock Steelie COPO Style Dog Dish Wheel, Rim Only
14X7 Stock Steelie COPO style dog dish wheel is now available for your Firebird. This steel wheel is 14 X 7 and sold individually.This O.E. Style Chevy wheel in primer is a versatile wheel that fits 10 1/8" outside knob caps. Perfect wheel for the COPO or SLEEPER look. This will was found on the COPO Super Cars with the GM factory dog dish hub caps. These steel wheels are an easy way to upgrade the look of your car or truck. Paint them the exact color you want, and with so many different caps to choose from, you can easily customize these wheels to your own unique style. Proudly Made in the USA!
Pictured painted with the Dog Dish Poverty Hub Cap for reference only. Cap, Paint, and Tire are sold separately.
PART NUMBER: WHE-754
|
|
|
|
|
|
|
|
|
|
14" Rally Wheel with Goodyear Wide Tread Skinny Whitewall
|
|
|
Extra cool wheel and tire combo for your classic. Rim is 14 inch and in great shape. Tire is a real vintage Goodyear speedway wide tread thin ( pin ) white wall. Just came from a 20 plus year old parts collection. Rim code is " JA ". Tire size is G70-14 and it has plenty tread with no major issues. Perfect spare for your ride.
Part Number : WHE-2300
14x6 Rally II 5 x 4-3/4" HL " JA " JK JT KT KU 525708
67 Firebird w/ Disc Brakes
70 Firebird
76 Firebird
69 Grand Prix
73-74 Le Mans
77-79 Phoenix
67 Tempest
68 Tempest w/ Disc Brakes
69-72 Tempest
|
|
|
|
|
|
|
|
|
|
15 Inch Honeycomb Wheel Rim - Original GM Used
|
|
Please call for availability
|
|
|
Rare original GM honeycomb wheel for your bird. Correct 15 inch diameter and 7 inch width, just like factory. This honey comb design was a factory option on all 71 - 76 firebirds and trans ams, but looks great on any model you choose. Currently available as a used GM item only. The one you will receive will look similar to the one pictured, above average with no major issues. Sold as each.
Part Number: WHE-2017
|
|
|
|
|
|
|
|
|
|
15 Inch Pontiac Rally Wheel Rims and Firestone White Wall Tires, Set of 4 GM Used
|
|
|
15 Inch Pontiac Rally Wheel Rims and Firestone White Wall Tires, Set of 4 GM Used
Rare original GM Pontiac Rallye wheel rims and tires set for your Firebird or Trans Am. These will looks great on any model you choose. Been stored in climate control for almost 20 years. Sold as a complete set of 4. All are above average with no major issues. Tires are Firestone F78 Super Belts with sweet 1 inch wide center white wall. All hold air and look superb. Minimal cracking with hardly no wear. Front rims are coded KG, rears are HW. All four are great, no curbs, lug holes are awesome. Real matched set of vintage tires this nice are impossible to find. Perfect for your survivor.
Part Number: WHE-2036
|
|
|
|
|
|
|
|
|
|
15 X 6 Wheel Trim Ring, Rally Wheel Style, Each
|
|
|
New 15 x 6 Rally wheel trim ring. Inner clips go all the way around the ring. Outer lip is rounded and valve stem opening is "U" shaped. Correct rally wheel picture shown is for reference only. Sold as each.
Part Number: WHE-100
|
|
|
|
|
|
|
|
|
|
15 x 7 Rally Wheel Trim Rings, Stainless Steel - Set of 4
|
|
|
15 x 7 Rally Wheel Trim Rings, Stepped Edge, Set of 4
New 15 x 7 Rally wheel trim ring for your Firebird. Features the correct stepped edge design, very very close to what was installed on your 15 x 7 inch rally wheels from the factory. Made from premium quality stainless steel. Replaces original GM part number 9796696. Correct wheel application shown is for reference only.
Please look at the pictures shown and make sure this is the version you need.
Part Number: WHE-15
|
|
|
|
|
|
|
|
|
|
15 x 7 Rally Wheel Trim Rings, Stepped Edge Set of 4, USA Made
|
|
|
Firebird 15 x 7 Rally Wheel Trim Rings, Stepped Edge Set of 4, USA Made
New set of original style trim rings for your Firebird. This version fits all 15 X 7 inch rally wheels. Features the correct stepped edge and four inner riveted mounting clips. The clips don't wrap around the outer lip of the rim like some older versions. These are the most correct trim ring available today. Beautiful stainless steel, the real deal. Replaces original GM part number 9796696 perfectly. Made in the USA! Very limited quantity, when they are gone, that's it!
Part Number: WHE-13
|
|
|
|
|
|
|
|
|
|
15 x 7 Stock Steelie COPO Style Dog Dish Wheel, Rim Only
|
|
|
15 x 7 Stock Steelie COPO Style Dog Dish Wheel, Rim Only
15X7 Stock Steelie COPO style dog dish wheel is now available for your Firebird. This steel wheel is 15 X 7 and sold individually.This O.E. Style Chevy wheel in primer is a versatile wheel that fits 10 1/8" outside knob caps. Perfect wheel for the COPO or SLEEPER look. This will was found on the COPO Super Cars with the GM factory dog dish hub caps. These steel wheels are an easy way to upgrade the look of your car or truck. Paint them the exact color you want, and with so many different caps to choose from, you can easily customize these wheels to your own unique style. Proudly Made in the USA!
Pictured painted with the Dog Dish Poverty Hub Cap for reference only. Cap, Paint, and Tire are sold separately.
PART NUMBER: WHE-755
|
|
|
|
|
|
|
|
|
|
15 x 7 Wheel Trim Ring, Rally Wheel Style, Each
|
|
|
15 x 7 Rally Wheel Trim Ring, Stepped Edge, Each
New 15 x 7 Rally wheel trim ring for your Firebird. Features the correct stepped edge design, very very close to what was installed on your 15 x 7 inch rally wheels from the factory. Made from premium quality stainless steel. Replaces original GM part number 9796696. Correct wheel application shown is for reference only.
Please look at the pictures shown and make sure this is the version you need.
Part Number: WHE-15A
|
|
|
|
Deal of the Day
