You are here:Home > New Parts
Sort By:
Page of 27
1970 - 1981 Firebird Fully Automatic Power Antenna with Remote Motor
1970 - 1981 Firebird Fully Automatic Power Antenna with Remote Motor
Our Price: $184.95
Sale Price: $179.95
You save $5.00!

1970 - 1981 Firebird Fully Automatic Power Antenna with Remote Motor

This is a NEW power antenna assembly for 1970 - 1981 models. This fully automatic antenna uses OE-style mounting bezels and hardware. Retracts fully into the fender when the radio is turned off. This makes it an ideal solution for those with car covers – no need to remove the mast every time you put the cover on.

Remote motor assembly enables easy installation in vehicles in which space is a premium.

  • Original equipment style mounting bezel and hardware
  • Fully automatic operation
  • Mast retracts fully into fender
  • Ideal for use with car cover
  • All metal mounting part
  • Remote motor assembly for installation in tight space
  • Antenna cable include
  • This is not a factory replacement antenna, and may require some modification, as well as a minimum of 11¼ inches of depth below the mounting point.

Part Number: ANT-12
1968 - 1969 Firebird Pro Touring II Reclining Pre-assembled front bucket seats, procar Deluxe interior patter, pair.
1968 - 1969 Firebird Deluxe Pattern Touring II Reclining Front Bucket Seat Assemblies, Pair
Our Price: $1,199.95
Sale Price: $1,124.95
You save $75.00!

1968 - 1969 Firebird Deluxe Pattern Touring II Reclining Front Bucket Seat Assemblies, Pair

Finally...a complete pre-assembled, reclining seat for your 1968 - 1969 Firebird! These new 1968 - 1969 Firebird Deluxe Touring II Seats are upholstered and assembled using high quality, restoration grade Madrid grain vinyl, just like the original and is patterned to mimic the original deluxe design. At home in any 68 - 69 Firebird these Touring II Firebird sport seats are a drop in option for both restoration oriented and Resto-mod themed vehicles and have the added value of matching the rest of your factory style interior. These pro touring seats feature the original deluxe style upholstery with Comfortweave inserts for the vintage look with a pronounced side bolstering supported by heavy dense foam for added support under hard cornering. The Touring II Seats features the Procar® by Scat seat frame and foam. Bring the performance of a modern seat with original vintage styling of the 68 - 69 Firebird. This seat will add the style and support you have been needing in your Firebird.

Head rest – Included with each seat but not installed. The hardware and mounting points for the head rest are installed on the seat prior to the upholstery being installed. It is the customers option to install the head rest or not after purchasing.

Color matched to Distinctive Industries interior products
• Mimics the original interior design
• 20 reclining positions
• Seat frame designed to support high bolstered foam
• 18 seating track positions
• TIG welded and electrostatically coated frame and seat tracks
• 2 year limited warranty


*These are custom made per order, please allow 3-4 weeks for delivery

Note: Seat mount floor adapters are required for a direct fit. Use part#'s INT-1070 LH and INT-1071 RH

Part Number: INT-2138
1969 Firebird Pro Touring II Reclining Pre-assembled front bucket seats, procar standard interior patter, pair.
1969 Firebird Standard Pattern Touring II Reclining Front Bucket Seat Assemblies, Pair
Our Price: $1,199.95
Sale Price: $1,124.95
You save $75.00!

1969 Firebird Standard Pattern Touring II Reclining Front Bucket Seat Assemblies, Pair

Finally...a complete pre-assembled, reclining seat for your 1969 Firebird! These new 1969 Firebird Standard Touring II Seats are upholstered and assembled using high quality, restoration grade Madrid grain vinyl, just like the original and is patterned to mimic the original design. At home in any 69 Firebird these Touring II Firebird sport seats are a drop in option for both restoration oriented and Resto-mod themed vehicles and have the added value of matching the rest of your factory style interior. These pro touring seats feature the original style upholstery with vertical pleats for the vintage look with a pronounced side bolstering supported by heavy dense foam for added support under hard cornering. The Touring II Seats features the Procar® by Scat seat frame and foam. Bring the performance of a modern seat with original vintage styling of the 69 Firebird. This seat will add the style and support you have been needing in your Firebird.

Head rest – Included with each seat but not installed. The hardware and mounting points for the head rest are installed on the seat prior to the upholstery being installed. It is the customers option to install the head rest or not after purchasing.

  • Color matched to Distinctive Industries interior products
  • Mimics the original interior design
  • 20 reclining positions
  • Seat frame designed to support high bolstered foam
  • 18 seating track positions
  • TIG welded and electrostatically coated frame and seat tracks2 year limited warranty


*These are custom made per order, please allow 3-4 weeks for delivery

Note: Seat mount floor adapters are required for a direct fit. Use part#'s INT-1070 LH and INT-1071 RH

Part Number: INT-2137
1968 Firebird Pro Touring II Reclining Pre-assembled front bucket seats, procar standard interior patter, pair.
1968 Firebird Standard Pattern Touring II Reclining Front Bucket Seat Assemblies, Pair
Our Price: $1,199.95
Sale Price: $1,124.95
You save $75.00!

1968 Firebird Standard Pattern Touring II Reclining Front Bucket Seat Assemblies, Pair

Finally...a complete pre-assembled, reclining seat for your 1968 Firebird! These new 1968 Firebird Standard Touring II Seats are upholstered and assembled using high quality, restoration grade Madrid grain vinyl, just like the original and is patterned to mimic the original design. At home in any 68 Firebird these Touring II Firebird sport seats are a drop in option for both restoration oriented and Resto-mod themed vehicles and have the added value of matching the rest of your factory style interior. These pro touring seats feature the original style upholstery with vertical pleats for the vintage look with a pronounced side bolstering supported by heavy dense foam for added support under hard cornering. The Touring II Seats features the Procar® by Scat seat frame and foam. Bring the performance of a modern seat with original vintage styling of the 68 Firebird. This seat will add the style and support you have been needing in your Firebird.

Head rest – Included with each seat but not installed. The hardware and mounting points for the head rest are installed on the seat prior to the upholstery being installed. It is the customers option to install the head rest or not after purchasing.

Color matched to Distinctive Industries interior products
• Mimics the original interior design
• 20 reclining positions
• Seat frame designed to support high bolstered foam
• 18 seating track positions
• TIG welded and electrostatically coated frame and seat tracks
• 2 year limited warranty


*These are custom made per order, please allow 3-4 weeks for delivery

Note: Seat mount floor adapters are required for a direct fit. Use part#'s INT-1070 LH and INT-1071 RH

Part Number: INT-2136
1967 Firebird Pro Touring II Reclining Pre-assembled front bucket seats, procar standard interior patter, pair.
1967 Firebird Standard Pattern Touring II Reclining Front Bucket Seat Assemblies, Pair
Our Price: $1,199.95
Sale Price: $1,124.95
You save $75.00!

1967 Firebird Standard Pattern Touring II Reclining Front Bucket Seat Assemblies, Pair

Finally...a complete pre-assembled, reclining seat for your 1967 Firebird! These new 1967 Firebird Standard Touring II Seats are upholstered and assembled using high quality, restoration grade Madrid grain vinyl, just like the original and is patterned to mimic the original design. At home in any 67 Firebird these Touring II Firebird sport seats are a drop in option for both restoration oriented and Resto-mod themed vehicles and have the added value of matching the rest of your factory style interior. These pro touring seats feature the original style upholstery with vertical pleats for the vintage look with a pronounced side bolstering supported by heavy dense foam for added support under hard cornering. The Touring II Seats features the Procar® by Scat seat frame and foam. Bring the performance of a modern seat with original vintage styling of the 67 Firebird. This seat will add the style and support you have been needing in your Firebird.

Head rest – Included with each seat but not installed. The hardware and mounting points for the head rest are installed on the seat prior to the upholstery being installed. It is the customers option to install the head rest or not after purchasing.

Color matched to Distinctive Industries interior products
• Mimics the original interior design
• 20 reclining positions
• Seat frame designed to support high bolstered foam
• 18 seating track positions
• TIG welded and electrostatically coated frame and seat tracks
• 2 year limited warranty


*These are custom made per order, please allow 3-4 weeks for delivery

Note: Seat mount floor adapters are required for a direct fit. Use part#'s INT-1070 LH and INT-1071 RH

Part Number: INT-2135
1967 - 1969 Firebird Disc Brake Dust Shield Backing Plates, FOR 2" DROP SPINDLES and SINGLE PISTON CALIPERS
1967 - 1969 Firebird Disc Brake Backing Plates, FOR 2" DROP SPINDLES and Single Piston Calipers
Our Price: $64.95
Sale Price: $55.00
You save $9.95!

1967 - 1969 Firebird Disc Brake Backing Plates, FOR 2" DROP SPINDLES and SINGLE PISTON CALIPERS

New front disc brake backing plates for your 69 Firebird with 2 Inch Drop Spindles. Also great for 67 - 68 models with a disc brake conversion using single piston calipers and drop spindles ( 69 style ), these would be the backing plates you need. Correct shape, size, and fit. Sold as a matched left hand and right hand pair only.

Use with our 2" Drop Spindles, part # BRC-568

*FOR 2 INCH DROP SPINDLES and SINGLE PISTON CALIPERS ONLY

PART NUMBER: BRC-182
1970 - 1981 Firebird and Trans Am Windshield Wiper Motor to Firewall Mounting Plate, Concealed
1970 - 1981 Firebird and Trans Am Windshield Wiper Motor to Firewall Mounting Plate, Concealed
Our Price: $31.95
Sale Price: $209.95

1970 - 1981 Firebird and Trans Am Windshield Wiper Motor to Firewall Mounting Plate, Concealed

NEW correct design Windshield Wiper Motor Firewall Mounting Plate for the concealed wipers on your 70 - 81 Firebird model. This is for the 1970 - 1981 wipers that are NOT seen when in the off position. The wipers get pulled down to hide under the hood when off.

A must have part to mount the concealed wiper motor to the firewall.


Part Number: WIN-122
1967 - 1968 Firebird CUSTOM Center Dash Black and Chrome AC Vent Assembly with (2) 2.5-inch Hose Adapter
1967 - 1968 Firebird CUSTOM Center Dash Black and Chrome AC Vent Assembly with (2) 2.5-inch Hose Adapter
Our Price: $89.95
Sale Price: $79.95
You save $10.00!

1967 - 1968 Firebird CUSTOM Center Dash Black and Chrome AC Vent Assembly with (2) 2.5-inch Hose Adapter

NEW Black and Chrome Air Conditioning Vent, Bezel and 2.5" Duct Hose Adapter for 1967 - 1968 Firebird. This is a aftermarket style replacement center AC vent for 67 - 68 Firebird models with Air Conditioning. This new center dash air vent assembly is for use with air conditioned models.

This is included in our HTR-80 AC kit.

Great for all 67 - 68 Firebird models with factory air or most aftermarket AC kit. This louver assembly features a louver that directs air up down left and right for superior air control.

For models with factory air this kit may be purchased and installed as an optional upgrade to the OEM barrel-style louver. A template is provided for center dash trim plate modification and the trim plate modification instructions

Comes complete with hose adapter, mounting plate, and nylon washers.

PART NUMBER: HTR-214
1967 - 1968 Firebird Center Dash Chrome AC Vent Assembly with 2.5-inch Hose Adapter
1967 - 1968 Firebird Center Dash Chrome AC Vent Assembly with 2.5-inch Hose Adapter
Our Price: $99.95
Sale Price: $89.95
You save $10.00!

1967 - 1968 Firebird Center Dash Chrome AC Vent Assembly with 2.5-inch Hose Adapter

NEW Chrome Air Conditioning Vent, Bezel and 2.5" Duct Hose Adapter for 1967 - 1968 Firebird. This is a factory style replacement center AC vent for 67 - 68 Firebird models with Air Conditioning. This new center dash air vent assembly is for use with air conditioned models.

Comes complete with hose adapter, mounting plate, nylon washers, and mounting screws.

PART NUMBER: HTR-213
1970 - 1979 Pontiac Firebird and Trans Am V8 Engine Intake Manifold Stud Bolt Kit, 4 Pieces
1970 - 1979 Pontiac V8 Engine Engine Intake Manifold Stud Bolt Kit, 4 Pieces
Our Price: $16.95

1970 - 1979 Pontiac V8 Engine Engine Intake Manifold Stud Bolt Kit, 4 Pieces

These are the studs that are used on all 70 - 79 V8 Pontiac engines. 1970 was the first year for the studs to hold on all the engine brackets. This saved bolts and you will notice in 1970 there are less brackets on the engine and they are easier to install with the studs. 2 are used on the passenger side if the car had AC and on is used at the throttle bracket and one at the alternator bracket. These are used on all Pontiac V8's.

These reproduction are made identical to the originals. The bolts are black phosphate and the washers are black phosphate.

These are the details that separate the first place cars from the rest.

Applications: 70-79 Pontiac all V8 models

Part Number: ENC-2342
1970 - 1973 Firebird and Trans Am Tail Light Bezel Mounting Studs, Nuts and Screws Hardware Kit
1970 - 1973 Firebird and Trans Am Tail Light Bezel Mounting Studs and Nut Hardware Kit
Coming Soon!

Coming Soon!

1970 - 1973 Firebird and Trans Am Tail Light Bezel Mounting Studs, Nuts and Screws Hardware Kit


New correct tail lamp mounting hardware set for your 70, 71, 72, and 73 Firebird. This set has the studs that screw in to the chrome bezels and attach the tail light housings. The correct small screws are also included to get the job done right the first time. Complete set for both left and right sides.

Each Tail Light Assembly requires (3) Screws, (6) Studs and (6) Nuts to install. This Hardware Set will install both the LH Driver Side and the RH Passenger Side Tail Light Assembly.

Part Number: LIG-2015H
1974 - 1975 Firebird or Trans Am Front Upper Header Panel, Fiberglass
1974 - 1975 Firebird or Trans Am Front Upper Header Panel, Fiberglass
Our Price: $569.95
Sale Price: $549.95
You save $20.00!

1974 - 1975 Firebird or Trans Am Front Upper Header Panel, Fiberglass

Brand new front upper header panel for your 1974 and 1975 Firebird or Trans Am. Custom made from high grade durable fiberglass. Correct for all 74 - 75 models. Usually will have to slightly modify to fit your vehicle. Once installed and painted these look great. If not in stock, please allow a few weeks for delivery. New tooling for a better fit! Custom made by hand in the USA!

Part Number: SHE-2250
1970 - 1972 Pontiac V8 Engine Intake Manifold and Crossover Mounting Stud, Bolt & Washer Hardware Set
1970 - 1972 Pontiac V8 Engine Intake Manifold and Crossover Mounting Stud, Bolt & Washer Hardware Set
Our Price: $34.95

1970 - 1972 Pontiac V8 Engine Intake Manifold and Crossover Mounting Stud, Bolt & Washer Hardware Set

These are the bolts and thick special washers that hold the cast iron heat cross over to the heads and the intake to the heads on all Ram Air IV and 455 HO cars. 1970 was the first year for the studs to hold on all the engine brackets. This saved bolts and you will notice in 1970 there are less brackets on the engine and they are easier to install with the studs. 2 are used on the passenger side if the car had AC and on is used at the throttle bracket and one at the alternator bracket. These are used on all Pontiac V8's.

Made identical to the originals. The bolts are black phosphate and washers are silver zinc. These are the details that separate the first place cars from the rest.

70-72 Pontiac all V8 models with a heat crossover.

Part Number: ENC-2341
1969 - 1970 Pontiac V8 Engine Intake Manifold and Crossover Mounting Bolt & Washer Hardware Set
1969 - 1970 Pontiac V8 Engine Intake Manifold and Crossover Mounting Bolt & Washer Hardware Set
Our Price: $34.95

1969 - 1970 Pontiac V8 Engine Intake Manifold and Crossover Mounting Bolt & Washer Hardware Set

These are the bolts and thick special washers that hold the cast iron heat cross over to the heads and the intake to the heads on all Ram Air IV cars. This cast iron crossover runs under the ram air IV aluminum intake and keeps heat away from the carb. These bolts and washers are a must for a correct restoration and to hold the crossover and the intake in place. The other bolts that hold the aluminum intake to the heads have a special flange head washer to give proper support. These are a must for a concourse restoration.

Made identical to the originals. The bolts are black phosphate and washers are silver zinc. These are the details that separate the first place cars from the rest.

Applications: 69-70 Pontiac all Ram Air 4 V8 models

Part Number: ENC-2340
1969 - 1972 Pontiac V8 Engine Intake Manifold Crossover Mounting Bolt & Washer Hardware Set
1969 - 1971 Pontiac Aluminum Intake Heat Crossover
Our Price: $19.95

1969 - 1972 Pontiac V8 Engine Intake Manifold Crossover Mounting Bolt & Washer Hardware Set

These are the bolts and thick special washers that hold the cast iron heat cross over to the heads on all Ram Air IV car. This cast iron cross over runs under the ram air IV aluminum intake and keeps heat away from the carb. These bolts and washers are a must for a correct restoration and to hold the crossover and the intake in place. They are exact reproductions in silver zinc plating. These are a must for a concourse restoration.

Made identical to the originals. The bolts and washers are silver zinc. These are the details that separate the first place cars from the rest.

Applications: 69-72 Pontiac all Ram Air 4 V8 models

Correct fit for all 69 - 70 RAM AIR IV, 71 Firebird Formula 455 HO, and 71 Trans Am.

Part Number: ENC-2073H
1998 - 2002 Pontiac Firebird or Trans Am INNER REAR RH or LH Disc Brake Hose w/ ABS and Traction Control
1998 - 2002 Pontiac Firebird and Trans Am OUTER REAR RH or LH Disc Brake Hose w/ ABS and Traction Control
Our Price: $22.95
Sale Price: $19.95
You save $3.00!

1998 - 2002 Pontiac Firebird and Trans Am OUTER REAR RH or LH Disc Brake Hose w/ ABS and Traction Control

New Rear LEFT or RIGHT Brake Hose for your 1998 - 2002 Pontiac Firebird or Trans Am. This Hose is for OUTER Side on models with Traction Control and ABS. Great replacement brake hose at a great price! This NEW 98, 99, 00, 01 and 02 hose comes tested up to 4,000 PSI to ensure Safety standards are met.

Overall Length (In): 7-15/16 Inch
Overall Length (mm): 202mm
Hose Material: Rubber
End 1 Fitting Type: Banjo
End 1 Fitting Size (mm): 10mm
End 2 Fitting Size (mm): 10mm
End 2 Gender: Female
Gasket Or Seal Included: Yes

2 are required per vehicle. These are sold individually check your desired quantity when checking out.

PART NUMBER: BRC-803
1998 - 2002 Pontiac Firebird and Trans Am INNER REAR RH or LH Disc Brake Hose w/ ABS and Traction Control
1998 - 2002 Pontiac Firebird and Trans Am INNER REAR RH or LH Disc Brake Hose w/ ABS and Traction Control
Our Price: $22.95
Sale Price: $19.95
You save $3.00!

1998 - 2002 Pontiac Firebird and Trans Am INNER REAR RH or LH Disc Brake Hose w/ ABS and Traction Control

New Rear LEFT or RIGHT Brake Hose for your 1998 - 2002 Pontiac Firebird or Trans Am. This Hose is for INNER Side on models with Traction Control and ABS. Great replacement brake hose at a great price! This NEW 98, 99, 00, 01 and 02 hose comes tested up to 4,000 PSI to ensure Safety standards are met.

Overall Length (mm): 298mm
Hose Material: Rubber
End 1 Fitting Size (mm): 10mm
End 1 Gender: Female
End 2 Fitting Size (mm): 12mm
End 2 Gender: Female

2 are required per vehicle. These are sold individually check your desired quantity when checking out.

PART NUMBER: BRC-802
1998 - 2002 Pontiac Firebird or Trans Am FRONT Disc Brake Hose w/ ABS and Traction Control, RH Passenger Side
1998 - 2002 Pontiac Firebird and Trans Am FRONT Disc Brake Hose w/ ABS and Traction Control, RH Passenger Side
Our Price: $34.95

1998 - 2002 Pontiac Firebird and Trans Am FRONT Disc Brake Hose w/ ABS and Traction Control, RH Passenger Side

New Front RIGHT Brake Hose for your 1998 - 2002 Pontiac Firebird and Trans Am. This Hose is for Front RH Passenger Side for models with Traction Control and ABS. Great replacement brake hose at a great price! This NEW 98, 99, 00, 01 and 02 hose comes tested up to 4,000 PSI to ensure Safety standards are met.

Overall Length (In): 12-1/4 Inch
Overall Length (mm): 310.4mm
Hose Material: Rubber
End 1 Fitting Type: Banjo
End 1 Fitting Size (mm): 10mm
End 2 Fitting Size (mm): 10mm
End 2 Gender: Female
Gasket Or Seal Included: Yes

PART NUMBER: BRC-801
1998 - 2002 Pontiac Firebird or Trans Am FRONT Disc Brake Hose w/ ABS and Traction Control, LH Driver Side
1998 - 2002 Pontiac Firebird and Trans Am FRONT Disc Brake Hose w/ ABS and Traction Control, LH Driver Side
Our Price: $34.95

1998 - 2002 Pontiac Firebird and Trans Am FRONT Disc Brake Hose w/ ABS and Traction Control, LH Driver Side

New Front LEFT Brake Hose for your 1998 - 2002 Pontiac Firebird or Trans Am. This Hose is for Front LH Driver Side for models with Traction Control and ABS. Great replacement brake hose at a great price! This NEW 98, 99, 00, 01 and 02 hose comes tested up to 4,000 PSI to ensure Safety standards are met.

Overall Length (In): 12-1/4 Inch
Overall Length (mm): 310.4mm
Hose Material: Rubber
End 1 Fitting Type: Banjo
End 1 Fitting Size (mm): 10mm
End 2 Fitting Size (mm): 10mm
End 2 Gender: Female
Gasket Or Seal Included: Yes

PART NUMBER: BRC-800
1998 - 2002 Pontiac Firebird and Trans Am Four-Wheel Disc w/ ABS and Traction Control Complete Brake Line Set 10pc, Stainless Steel
1998 - 2002 Pontiac Firebird and Trans Am Four-Wheel Disc w/ ABS and Traction Control Complete Brake Line 10 pc Set, Stainless Steel
Our Price: $204.95
Sale Price: $199.95
You save $5.00!

1998 - 2002 Pontiac Firebird and Trans Am Four-Wheel Disc w/ ABS and Traction Control Complete Brake Line 10 pc Set, Stainless Steel



New complete STAINLESS STEEL line kit for your 1998 - 2002 Pontiac Firebird or Trans Am. This kit is for Front Disc, Rear Disc, Traction Control and ABS models. Great replacement brake line set at a great price! This NEW 98, 99, 00, 01 and 02 line kit comes pre-bent to factory specs.

Rubber Brake Hoses are Sold Separately

Stainless steel, premium quality! Sold in a complete 10 piece kit.

PART NUMBER: BRC-792S
1998 - 2002 Pontiac Firebird and Trans Am Four-Wheel Disc w/ ABS and Traction Control Complete Brake Line Set 10pc, OE Steel
1998 - 2002 Pontiac Firebird and Trans Am Four-Wheel Disc w/ ABS and Traction Control Complete Brake Line 10 pc Set, OE Steel
Our Price: $174.95
Sale Price: $169.95
You save $5.00!

1998 - 2002 Pontiac Firebird and Trans Am Four-Wheel Disc w/ ABS and Traction Control Complete Brake Line 10 pc Set, OE Steel

New complete STEEL line kit for your 1998 - 2002 Pontiac Firebird or Trans Am. This kit is for Front Disc, Rear Disc, Traction Control and ABS models. Great replacement brake line set at a great price! This NEW 98, 99, 00, 01 and 02 line kit comes pre-bent to factory specs.

Rubber Brake Hoses are Sold Separately

OE Steel, premium quality! Sold in a complete 10 piece kit.

PART NUMBER: BRC-792
Pontiac Firebird Exhaust Manifold Flanges, H.O. 3-Hole, Pair
Pontiac Firebird Exhaust Manifold Flanges, H.O. 3-Hole, Pair
Our Price: $48.50
Sale Price: $44.95
You save $3.55!

Pontiac Firebird Exhaust Manifold Flanges, H.O. 3-Hole, Pair

New factory style exhaust manifold flange set for your 64, 65, 66, and 67 Pontiac Engine with Ram Air manifolds. Exact fit for all models that need three bolt flanges on both sides. These are super nice high quality ductile iron construction. Machined to 2.5 inch diameter for a better flow. Sold as a matched pair.

These high quality exhaust manifold flanges are a perfect choice when replacing or repairing the exhaust on your Ram Air Pontiac. These flanges will fit up to a 2-1/2" pipe and will provide a leak free exhaust for years to come.

These are the exhaust pipe to manifold flanges for the 67 ram air exhaust manifolds (these are the big style header type manifolds for the high performance cars). These are also needed for adding 67 ram air manifolds to the 64-67 models.

These are unique to the ram air manifold only. Both are 3 bolt flanges. This is not a muffler shop item. If you are adding the high performance manifolds to your car you need these to connect the head pipe to the manifold.

1967 was the first year for the ram air or big exhaust manifolds and the only year that used the 3 bolt flanges. The 67 ram air manifolds will bolt up to any 64-67 V8 Pontiac head.

Fits 64-67 Pontiac Ram Air Manifolds


PART NUMBER: ENC-2179
1998 - 2002 Firebird Front Fender Flange Shield Kit
1998 - 2002 Firebird Front Fender Alignment Brace Flange Shield Kit
Our Price: $114.95
Sale Price: $109.95
You save $5.00!

1998 - 2002 Firebird Front Fender Alignment Brace Flange Shield Kit

The Detroit Speed Inc., Fender Flange Shield Kit is designed to shield and reinforce the lower fender mounting flange to prevent damage and fender misalignment. This kit is 100% bolt-on and utilizes existing body and chassis mounting points. All required hardware is included and the components feature a durable black powder coat finish.

Click for PDF Instruction Sheet

PART NUMBER: SHE-625
1993 - 2002 Detroit Speed DSE Firebird X-Tracker Hub Adapter Kit
1993 - 2002 Firebird Detroit Speed DSE X-Tracker Hub Adapter Kit
Our Price: $995.00

1993 - 2002 Firebird Detroit Speed Inc. X-Tracker Hub Adapter Kit

The Detroit Speed Inc. Hub Adapter Kit uses heat treated alloy steel adapters to allow the use of SKF Racing X-Tracker hubs on the factory 1993 - 2002 Firebird / Camaro spindle. The use of high performance hubs results in improved hub stiffness and performance, reduced brake caliper piston knock-back as well as improved hub durability. The kit is a 100% bolt-on system that includes all required mounting hardware and electrical connectors. The wheel hub remains in the factory location and does not affect wheel offset or brake system compatibility as well as retains full functionality of the ABS system. Our hub adapters also feature a corrosion resistant silver zinc coating to ensure durability and longevity.

Click here for installation instructions from Detroit Speed..

Part Number: BRC-577
1990 - 1992 Firebird Convertible Top Side Rail #2 Bow Connecting Rods Pair
1990 - 1992 Firebird Convertible Top Side Rail #2 Bow Connecting Rods Pair
Our Price: $74.99

1990 - 1992 Firebird Convertible Top Side Rail #2 Bow Connecting Rods Pair

New pair of reproduction 90 - 92 Firebird Convertible Top Side Rail #2 Bow Connecting Rods. These are no longer available from GM and originally these hard to find rods were only sold from GM in a #2 Bow Side Folding Top Assembly 12504750 & 12504751. You couldn't even purchase them separately. These rods tended to break after years of use. These are reproductions of the original rods. Sold in pairs only.

Part Number: CNV-78
1967 - 1968 Firebird Lower Grill Support Bracket Grommet, Each
1967 - 1968 Firebird NEW Lower Grill Support Bracket Grommet, Each
Our Price: $2.29
Sale Price: $1.95
You save $0.34!

1967 - 1968 Firebird Grill Support Bracket Grommet, Each

NEW, correct design grill bracket grommet for your 1967 - 1968 Firebird. Exact fit for all 67 and 68 models. Four grommets are required per car, two grommets per grille. Sold as each, in case you just need one. Replaces original GM Part number 9777959 perfectly. This new grommet mounts to the grille support brackets just like the originals. Order yours today!

Need the Bracket and Grommet, try part number GRI-2017C

Sold Individually


Part Number : GRI-2017B
1970 - 1974 Firebird One Piece Complete Full Floor Pan with All Braces and Toe Boards, Automatic
1970 - 1974 Firebird One Piece Complete Full Floor Pan with All Braces and Toe Boards, Automatic
Our Price: $729.95
Sale Price: $699.95
You save $30.00!

1970 - 1974 Firebird One Piece Complete Full Floor Pan with All Braces and Toe Boards, Automatic

New Complete 70 - 74 one piece full floor pan assembly for Firebirds equipped with an automatic transmission. Manufactured to factory specifications featuring factory style contours, toes boards, pre-punched drain holes, correct stiffening ribs, and all underside bracing. All floors are EDP coated for rust prevention plus the toe boards, torque boxes and seat braces are pre-installed. Exact fit for all 70 - 74 models. Finally available this new full floor panel will allow you to repair the complete underside of your Firebird! Great repair panel to fix rotten or rusted floor pans. Premium quality.

Fits all 1970, 70, 1971, 71, 1972, 72, 1973, 73, 1974, and 74 Firebird Models with a Automatic Transmission.

PART NUMBER: SHE-558
Billet Aluminum Pontiac Power Steering Pulley, Keyway Shaft
Billet Aluminum Pontiac Power Steering Pulley, Keyway Shaft
Our Price: $89.95
Sale Price: $84.95
You save $5.00!

Billet Aluminum Pontiac Power Steering Pulley, Keyway Shaft

V-Belt Pontiac power steering pump pulley. 5/8" Keyway shaft for Saginaw Pump. This Key-way Shaft style pulley was found on most 67 - 70 models with P/S. Use with ENC-2336 for a matching pulley set for 69 and newer models!

Shaft Diameter: 5/8"

Note: This pulley is for a Key-way Shaft Style Pump.

Part Number: POW-2338
Pontiac Power Steering Pulley, Press Fit
Billet Aluminum Pontiac Pulley Kit, 1969 and Newer
Our Price: $209.95
Sale Price: $199.95
You save $10.00!

Billet Aluminum Pontiac Pulley Kit, 1969 and Newer

Pulley Kit for 350, 400, 428 & 455 Pontiac Engines. Designed for use with stock power steering and alternator brackets.The V-Belt alternator pulley comes with a pulley cover. The alternator pulley and cap help cover unsightly alternator bolts for a clean look (cap bolts included). Use with POW-2338 (Key-way) or POW-2339 (Press-on) for a matching Power Steering Pulley.

KIT INCLUDES:
2 Groove Water Pump Pulley
2 Groove Crank Pulley
1 Groove Alternator Pulley

FITS VEHICLES WITH:
1969 or newer water pump, 4.5" from flange to engine block
PONTIAC V8 ENGINES (350 - 400, 428 & 455)
1969+ Pontiac Passenger Cars
Generally fits the following models with original 350, 400, 428 & 455 engines installed.

Note: 1969 was a transition year and you need to ensure that you have the taller 4.5" water pump.

***PLEASE DOUBLE CHECK YOUR WATER PUMP AND MAKE SURE THIS WILL WORK FOR YOUR SET-UP. THIS PULLEY KIT IS NON-RETURNABLE.***

1969 - 1974 Pontiac GTO
1969 - 1977 Pontiac Grand Prix
1969 - 1981 Pontiac LeMans
1969 - 1976 Pontiac Bonneville
1969 - 1976 Pontiac Firebird
1969 - 1976 Pontiac Trans Am
1969 - 1981 Pontiac Catalina
1978 - 1980 Pontiac Grand Am
1969 - 1972 Pontiac Tempest
1969 - 1977 Pontiac Ventura

Part Number: ENC-2336
Billet Aluminum Pontiac Power Steering Pulley, Press Fit
Billet Aluminum Pontiac Power Steering Pulley, Press Fit
Our Price: $89.95
Sale Price: $84.95
You save $5.00!

Billet Aluminum Pontiac Power Steering Pulley, Press Fit

V-Belt Pontiac power steering pump pulley. 3/4" press fit shaft for Saginaw Pump. This press-on style pulley was found on most 71 - 81 2nd Gen models with P/S. Use with ENC-2336 for a matching pulley set!

Shaft Diameter: 3/4" Press Fit

Note: This pulley is press on.

Part Number: POW-2339