You are here:Home > Exhaust & Fuel System
Choose a sub category:
Dual Exhaust Systems Exhaust Manifolds
Exhaust Pipes and Tips Fuel Gas Caps
Fuel Hose Fuel Lines
Fuel Pump Fuel System Components
Fuel Tanks Studs & French Locks
Sort By:
Page of 14
1967 - 1968 Camaro Fuel Gas Tank Kit with 3/8" Factory Sending Unit
1967 - 1968 Camaro Fuel Gas Tank Kit with 3/8" Factory Sending Unit
Our Price: $209.95

1967 - 1968 Firebird Fuel Gas Tank Kit with 3/8" Factory Sending Unit

Fuel tank kit for 67 - 68 Firebird models. Dont forget to choose your desired sending unit. Premium quality! Kit includes tank, 3/8" factory sending unit, sending unit lock ring and gasket, one pair of fuel tank straps, anti-squeak set and mounting bolts.

Part Number: FUE-1
1967 - 1968 Correct Firebird Vented Fuel Gas Cap
1967 - 1968 Correct Firebird Vented Fuel Gas Cap
Our Price: $24.95

1967 - 1968 Correct Firebird Vented Fuel Gas Cap

New correct reproduction fuel cap for your 67 - 68 Firebird. Vented as original. This new fuel cap has original ANTI SURGE VENTED and S rivet as orginal. Replace your missing or aftermarket gas cap today with a quality reproduction replacement.

Part Number: FUE-2058N
1967 - 1968 Firebird Exhaust Manifold Heat Riser Flapper Spring
1967 - 1968 Exhaust Manifold Heat Riser Flapper Spring
Our Price: $19.95
Sale Price: $18.50
You save $1.45!

New exhaust manifold heat riser flapper SPRING for your 67 - 68 Firebird. Exact fit for all 67 - 68 Firebirds. Replaces GM Part # 521580 perfectly. Correctly made to OEM specifications! Mounts to the exahust manifolds and actuates the flapper.

Part Number: FUE-2119
1967 - 1968 Firebird Dual Exhaust System with Resonators, With RAM AIR  for RAM AIR H.O. Manifolds
1967 - 1968 Firebird Dual Exhaust System with Resonators, for RAM AIR Manifolds, Aluminized Steel
Our Price: $429.95
Sale Price: $399.95
You save $30.00!

This system fits 1967 - 1968 Firebird 400 Engines WITH RAM AIR AND COMES WITH RESONATORS. Factory 67 - 68 Firebird pre-bent aluminized exhaust system includes tailpipes, headpipes, resonators, muffler, and clamps. (Hangers, and flanges are not included) OEM Specifications! This system is made to fit RAM AIR H.O. Manifolds.

FACTORY PRE-BENT TO GM SPECIFICATIONS. INCLUDES CLAMPS, MUFFLERS, HEAD PIPES, AND TAIL PIPES. THIS KIT COMES WITH (1) TRANSVERSE MUFFLER THAT GOES OVER THE REAR END AND (2) RESONATORS FOR UNDER REAR SEATS. THESE SYSTEMS ARE DESIGNED FOR CARS WITH OR WITHOUT CHROME TIPS. YOU WILL HAVE TO CUT TAIL PIPES TO INSTALL CHROME EXTENSIONS.

~~This kit fits LH manifold with a 2-bolt flange and RH manifold with a 3-bolt flange. Both manifolds must require 2-1/4" headpipes.

Part Number: FUE-2010
1967 - 1968 Firebird Dual Exhaust System with Resonators, Without RAM AIR  for Standard Manifolds
1967 - 1968 Firebird Dual Exhaust System with Resonators, for Standard (NON RAM AIR) Manifolds, Aluminized Steel
Our Price: $429.95
Sale Price: $399.95
You save $30.00!

This system fits 1967 - 1968 Firebird 400 Engines WITHOUT RAM AIR AND COMES WITH RESONATORS. Factory 67 - 68 Firebird pre-bent aluminized exhaust system includes flanges, tailpipes, headpipes, resonators, muffler, and clamps. (Hangers are not included) OEM Specifications! This system is made to fit STANDARD (NON RAM AIR) Manifolds.

FACTORY PRE-BENT TO GM SPECIFICATIONS. INCLUDES CLAMPS, FLANGES, MUFFLERS, HEAD PIPES, AND TAIL PIPES. THIS KIT COMES WITH (1) TRANSVERSE MUFFLER THAT GOES OVER THE REAR END AND (2) RESONATORS FOR UNDER REAR SEATS. THESE SYSTEMS ARE DESIGNED FOR CARS WITH OR WITHOUT CHROME TIPS. YOU WILL HAVE TO CUT TAIL PIPES TO INSTALL CHROME EXTENSIONS.

~~This kit fits LH manifold with a 2-bolt flange and RH manifold with a 2-bolt flange. Both manifolds must require 2" headpipes.

Part Number: FUE-2009
1967 - 1968 Firebird Fuel Gas Door Tension Spring
1967 - 1968 Firebird Fuel Gas Door Tension Spring
Our Price: $19.95

1967 - 1968 Firebird Fuel Gas Door Tension Spring

New rear fuel gas door tension spring for your Firebird. Exact fit for all 67 and 68 models. Helps keep your fuel door in tha open and closed positions. This component will repair the commonly worn out original and keep the fuel door working properly. Includes a new pin for mounting.

Part Number: FUE-2006
1967 - 1968 Firebird Fuel Gas Tank Filler Neck Hose with Tower Clamps, GM Markings
1967 - 1968 Firebird Fuel Gas Tank Filler Neck Hose with Tower Clamps, GM Markings
Our Price: $18.95

1967 - 1968 Firebird Fuel Gas Tank Filler Neck Hose with Tower Clamps, GM Markings

New correct design fuel tank hose for your 1967 or 1968 Firebird. Exact fit for all 67 - 68 models. Replaces original GM # 3834073. Includes original style tower clamps. This hose goes from your fuel tank to the fuel filler neck. Both tower clamps are included to make the connection. Includes GM ink markings just like originals.

Part Number: FUE-13
1967 - 1968 Firebird Fuel Gas Tank Filler Neck Screw Set
1967 - 1968 Firebird Fuel Gas Tank Filler Neck Screw Set
Our Price: $3.95

1967-1968 Firebird Fuel Gas Tank Filler Neck Screw Set

New correct style fuel filler neck screw set for your 1967 or 1968 Firebird. Exact fit for all 67 and 68 models. Mounts your fuel tank filler neck and the lower retainer plate. Set of 8.

PART NUMBER: FUE-524
1967 - 1968 Firebird Fuel Tank Kit
1967 - 1968 Firebird Fuel Gas Tank Kit with High Performance 1/2" Sending Unit
Our Price: $249.95

1967 - 1968 Firebird Fuel Gas Tank Kit with High Performance 1/2" Sending Unit

Fuel tank kit for 67 - 68 Firebird models. Dont forget to choose your desired sending unit. Premium quality! Kit includes tank, 1/2" factory sending unit, sending unit lock ring and gasket, one pair of fuel tank straps, anti-squeak set and mounting bolts.

Part Number: FUE-300
1967 - 1968 Firebird Fuel Neck Metal Cover
1967 - 1968 Firebird Fuel Neck Metal Cover
Our Price: $24.95

New correct design metal cover for your Firebird. This goes inside your trunk and protects your fuel neck. Factory installed on all 67 - 68 models. For the screw that goes with this, please see our part number FUE-11CH.
PART NUMBER: FUE-11C
1967 - 1968 Firebird Fuel Neck Metal Cover Mounting Screw
1967 - 1968 Firebird Fuel Neck Metal Cover Mounting Screw
Our Price: $1.49

Fuel neck metal cover mounting screw for 67 - 68 models. This is the screw that goes with our part number: FUE-11C.
PART NUMBER: FUE-11CH
1967 - 1968 Firebird Polished STAINLESS STEEL Fuel Gas Tank, Premium Quality
1967 - 1968 Firebird Polished STAINLESS STEEL Fuel Gas Tank, Premium Quality
Our Price: $289.95
Sale Price: $279.95
You save $10.00!

1967 - 1968 Firebird Polished STAINLESS STEEL Fuel Gas Tank, Premium Quality

Stainless Steel Fuel Gas Tank for 67 - 68 Pontiac Firebird models. Premium quality. Made with High Quality Stainless Steel. All units are water based leak tested after full product assembly. Lock ring and gasket included. Order yours today! Replaces GM Part # 39123377 perfectly but made in Stainless Steel. This is the custom Car Show Ready fuel tank your Bird deserves!

Key Features:
Exact fit for easy installation
Factory leak tested
Meets or exceeds manufacturer's specifications
High Grade Polished Stainless Steel
Corrosion resistant
Manufactured under ISO 9001 / TS 16949 quality system
100% tested and transit tested packaging

Measures: 39-3/8" x 20-7/8" x 7-3/4"

Part Number: FUE-521
1967 - 1968 Firebird Rear Fuel Gas Door Assembly
1967 - 1968 Firebird Rear Fuel Gas Door Assembly
Our Price: $69.95
Sale Price: $59.95
You save $10.00!

1967 - 1968 Firebird Rear Fuel Gas Door Assembly

New fuel gas door for your 1967 or 1968 Firebird. Includes studs for mounting and a new tension spring pre-installed. Works great for all 67 and 68 models. This version is technically a 68 version as original 67 doors had a small lip at the bottom for you to use when opening the door. In 68 GM made the door smooth and put a lip on the bottom of the " bird " emblem to use for opening the door. If your a little confused don't hesitate to call the shop at 1.859.408.2000.

Part Number: FUE-2016
1967 - 1968 Firebird Trunk Floor Gas Fuel Tank Brace Bracket, Each
1967 - 1968 Firebird Trunk Floor Gas Fuel Tank Brace Bracket, Each
Our Price: $49.95

New correct design trunk floor gas fuel tank brace.  This brace reinforces and supports your fuel tank straps.  Exact fit for all 67-68 models and will work for left or right hand sides.  Your fuel tank straps mount into these.  Two required per car, sold each.

PART NUMBER: SHE-351
1967 - 1968 Fuel Gas Tank Filler Neck Sleeve Retainer
1967 - 1968 Fuel Gas Tank Filler Neck Sleeve Retainer
Our Price: $7.95

New correct design metal retaining ring plate for your Firebird. Exact fit for all 67 - 68 models. Reinforcement for the lower mounting area of the fuel filler neck sleeve.

PART NUMBER: FUE-523
1967 - 1968 Fuel Gas Tank, LS1, Narrowed, Stainless Steel, Fuel Injected
1967 - 1968 Fuel Gas Tank, LS1, Narrowed, Stainless Steel, Fuel Injected
Our Price: $1,352.00

These stainless steel narrowed fuel tanks are designed specifically for use with The DSE mini-tub kit. These are a direct bolt-in using the original mounting location, and stainless steel fuel tank straps are provided. They are available for fuel injected or carbureted engines. All carbureted tanks have a 1/2" NPT fuel pick-up fitting compatible with either -8 AN or -10 AN fuel line. The DSE LS1 fuel pumps use a Walbro GSS340 electric in-tank pump that delivers 60-65 PSI @ 55gl/hr (on 13.5 volts). All tanks are baffled and pressure tested. 0-90 ohm fuel sending units for Camaro/Firebird are sold separately.

Part Number: FUE-466
1967 - 1968 Fuel Injected Firebird Gas Tank with Installed Pump and Sending Unit
1967 - 1968 Fuel Injected Firebird Gas Tank with Installed Pump and Sending Unit
Our Price: $549.95
Sale Price: $399.95
You save $150.00!

1967 - 1968 Fuel Injected Firebird Gas Tank with Installed Pump and Sending Unit

New original style fuel tank with internal electric fuel pump for your 67 or 68 Firebird. Designed to work with all your late model fuel injection engines: LS-1, LT-1, L98, LS-2, LS-7, ect. Pump includes 0-95 ohms sending unit. This tank is ready to go and designed to work with any 12 volt electric system. Also good for FAST EZ EFI set-ups. Keep it looking original with this easy to install FI tank for your Camaro.

FLOW RATE: 50.2 gph -58.1 gph
PRESSURE RANGE: 72.5 psi - 130.5 psi

Key Features:
Exact fit for easy installation
Factory leak tested
Meets or exceeds manufacturer's specifications
O.E.M. approved Ni-terne steel
Corrosion resistant
Precision engineered and tooled under OE specifications
Validated for fit, form, and function
Manufactured under ISO 9001 / TS 16949 quality system
100% tested
Transit tested packaging
Perfect fit guarantee
Three year warranty, See Extended Information for Details

Includes:
Fuel Sender, 0-95 ohms
In-Tank Stock Capacity Fuel Pump
Strainer
Lock-Ring & O-Ring

Part Number: FUE-550
1967 - 1968 Fuel Line Clips Set - 3/8" Single Line
1967 - 1968 Fuel Line Clips Set - 3/8" Single Line
Our Price: $26.95

3/8" single line fuel line clips set for 67 - 68 models.  7 pieces.

PART NUMBER: FUE-79
1967 - 1968 Fuel Line Injection Fuel Tank L98, LT1
1967 - 1968 Fuel Line Injection Fuel Tank L98, LT1
Our Price: $1,249.95

These stainless steel narrowed fuel tanks are designed specifically for use with The DSE mini-tub kit.  These are direct bolt-in using the original mounting location.  Stainless steel fuel tank straps are provided.  They are available for fuel injected or carbureted engines.  All carbureted tanks have a 1/2" NPT fuel pick-up fitting compatible with either -8 AN or -10 AN fuel line. The DSE LS1 fuel pumps use a Walbro GSS340 electric in-tank pump that delivers 60-65 PSI @ 55gl/hr (on 13.5 volts).  All tanks are baffled and pressure tested.  0-90 ohm fuel sending units for Firebird

Part Number: FUE-462
1967 - 1968 Gas Fuel Tank Filler Neck Hose Kit with Tower Clamps ( NO MARKINGS )
1967 - 1968 Gas Fuel Tank Filler Neck Hose Kit with Tower Clamps ( NO MARKINGS )
Currently not available with no ETA

New budget friendly fuel tank hose kit for your Firebird. Exact fit for all 67 - 68 models. This hose goes from your fuel tank to the fuel filler neck. Both original style tower clamps are included to make the connection. Includes high quality neoprene hose. Part Number: FUE-13B
1967 - 1968 Gas Tank Fuel Filler Neck Rubber Sleeve - OE Style
1967 - 1968 Gas Tank Fuel Filler Neck Rubber Sleeve - OE Style
Our Price: $28.95

New correct design solid rubber fuel neck sleeve for your bird. Exact fit for all 1967 - 1968 models. Made to correct factory specifications, replaces GM part number 7702818 perfectly.

Part Number: FUE-2005
1967 - 1968 Pontiac Firebird Fuel Gas Tank, Premium Quality
1967 - 1968 Pontiac Firebird Fuel Gas Tank, Premium Quality
Our Price: $134.95
Sale Price: $129.95
You save $5.00!

1967 - 1968 Pontiac Firebird Fuel Gas Tank, Premium Quality

Correct Fuel Gas Tank for 67 - 68 Pontiac Firebird models. Premium quality. Made with corrosion resistant O.E.M. approved Ni Terne steel. All units are water based leak tested after full product assembly. Lock ring and gasket included. Order yours today! Replaces GM Part # 3912377 perfectly. This is the North American Made premium quality fuel tank your Bird deserves!

Key Features:
Exact fit for easy installation
Factory leak tested
Meets or exceeds manufacturer's specifications
O.E.M. approved Ni-terne steel
Corrosion resistant
Precision engineered and tooled under OE specifications
Validated for fit, form, and function
Manufactured under ISO 9001 / TS 16949 quality system
100% tested and transit tested packaging
Perfect fit guarantee with a three year warranty, see Extended Information for details

Measures: 39-3/8" x 20-7/8: x 7-3/4"

Part Number: FUE-3
1967 - 1968 Stainless Steel Narrowed Fuel Tank For Carbureted Cars
1967 - 1968 Stainless Steel Narrowed Fuel Tank For Carbureted Cars
Our Price: $936.00

New stainless steel narrowed fuel tank designed specifically for use with mini-tub kits.  These are a direct bolt-in using the original mounting locations.  Stainless steel fuel tank straps are included.  All carbureted tanks have a 1/2" NPT fuel pick-up fitting compatible with either -8 AN or -10 AN fuel lines.  All tanks are baffled and pressure tested.  67-68 tank capacity is 17 gallons.  

Part Number: FUE-461
1967 - 1969 Accelerator Gas Pedal Lever Through Firewall
1967 - 1969 Accelerator Gas Pedal Lever Through Firewall
Our Price: $39.95

New correct Accelerator Gas Pedal Lever Through Firewall for your first gen Firebird or Trans Am. Exact fit for all 1967 - 1969 models that have a throttle cable. Some 67 Firebirds used a throttle rod style set up so please double check. Fits all 68 and 69 models V8 and V6. This lever mounts at the firewall with the accelerator pedal mounting to one end and the accelerator cable attaching to the other end.

Part Number: ACL-2005
1967 - 1969 Cross Flow Muffler OE Style
1967 - 1969 Cross Flow Muffler OE Style
Our Price: $99.95
Sale Price: $89.95
You save $10.00!

Correct aluminum crossflow muffler that fits OE style systems for 67, 68, and 69 models.  Premium quality!

Firebird Years: 1967 1968 1969

Part Number: FUE-112
1967 - 1969 Firebird Exhaust Manifold, 6 Bolt LH, Original GM Used
1967 - 1969 Firebird Exhaust Manifold, 6 Bolt LH, Original GM Used
Currently Not Available With No ETA

1967 - 1969 Firebird Exhaust Manifold, 6 Bolt LH, Original GM Used

Correct D-port exhaust manifold for your Firebird. Exact fit for all 326, 350, 400, V8 engines. This one is for the left hand, drivers side. Two bolt exhaust flange, center outlet. Six bolt hole locations where it mounts to your head. Currently available as a GM used item only. The one you will receive will similar to the one pictured. Above average condition with no major damage.

Factory GM part number # 9777755 = 1968 Bird.

Fits all 67, 68, and 69 ( Except H.O. or RAM AIR which require long branch manifolds )

Part Number ENC-2250
1967 - 1969 Firebird Fuel Gas Tank Sending Unit, 5/16 Inch
1967 - 1969 Firebird Fuel Gas Tank Sending Unit, 5/16 Inch
Our Price: $59.95

1967 - 1969 Firebird Fuel Gas Tank Sending Unit, 5/16 Inch

New correct sending unit for 67 - 69 Firebird. This version features a 5/16 inch diameter line. Exact fit for all lower horsepower models.

Part Number: FUE-24B
1967 - 1969 Firebird Sending Unit Rubber Seal
1967 - 1969 Firebird Fuel Tank Sending Unit Lock Ring Rubber Gasket Seal
Our Price: $2.95

Sending unit rubber seal for 67 - 69 models.

Part Number: FUE-31
1967 - 1969 Firebird Gas Fuel Tank Sending Unit with Vent Vapor Return Line
1967 - 1969 Firebird Gas Fuel Tank Sending Unit with Vent Vapor Return Line
Our Price: $59.95

1967 - 1969 Firebird Gas Fuel Tank Sending Unit with Vent Vapor Return Line

New original style sending unit for your Firebird or Trans Am. Exact fit for all 1967 - 1969 models. This version features a 3/8 inch fuel line and a 1/4 inch vent vapor return line.

PART NUMBER: FUE-25
1967 - 1969 Firebird Gas Fuel Tank Sending Unit, 3/8" Inch
1967 - 1969 Firebird Gas Fuel Tank Sending Unit, 3/8" Inch
Our Price: $59.95
Sale Price: $54.95
You save $5.00!

1967 - 1969 Firebird Gas Fuel Tank Sending Unit, 3/8" Inch

New original style sending unit for your Firebird. Exact fit for all 1967 - 1969 models. This version features a 3/8 inch diameter line. Correct fit for all engines that don't use the extra vent vapor return line.

Part Number: FUE-24