You are here:Home > Paints & Dyes
Sort By:
Page of 3
"Easy On" Vinyl or Decal Application Gel Solution
"Easy On" Vinyl or Decal Application Gel Solution
Our Price: $17.95

Easy On is a water-soluble gel designed to temporarily suspend the tack of pressure sensitive vinyl film adhesive and minimize the appearance of air bubbles during installation.  Easy On should be used when applying graphics in extreme heat (above 90F), installing graphics that require exact positioning, or when applying large, hard-to-handle graphics.  Unlike soap and water, no filmy residue remains after the solution dries.  Sold by the pint.

Part Number: PAI-39
"Metal Mask" Single Component Polyurethane Paint Coating - Bare Metal Gray Finish, 1 Pint
"Metal Mask" Single Component Polyurethane Paint Coating - Bare Metal Gray Finish, 1 Pint
DISCONTINUED

Metal Mask is a single component polyurethane coating that makes any metal surface look exactly like new bare metal.

Metal Mask is non-porous and will not crack, chip, or peel when properly applied. It has great scratch and abrasion resistance and its not sensitive to UV light. Follow the directions carefully and you will be rewarded with the finest protective coating for metal available anywhere!

Uses include undercarriage components, gas tanks, steering components, hood latches, hinges, and springs.

PART NUMBER: PAI-41
"Metal Mask" Single Component Polyurethane Paint Coating - Bare Metal Gray Finish, 1 Quart
"Metal Mask" Single Component Polyurethane Paint Coating - Bare Metal Gray Finish, 1 Quart
discontinued

Discontinued

Metal Mask is a single component polyurethane coating that makes any metal surface look exactly like new bare metal. Metal Mask is non-porous and will not crack, chip, or peel when properly applied. It has great scratch and abrasion resistance and its not sensitive to UV light. Follow the directions carefully and you will be rewarded with the finest protective coating for metal available anywhere! Uses include undercarriage components, gas tanks, steering components, hood latches, hinges, and springs.

PART NUMBER: PAI-40
Cast Blast High Temperature 1200 Hot Spot Spray Paint, Iron Gray
***This has been replaced by PAI-185 Nu-Cast Flameproof Paint***
*USE PAI-185 NU-CAST PAINT

***This has been replaced by PAI-185 Nu-Cast Flameproof Paint***

Original Cast Blast Spray Paint, Natural Iron Gray


New cast blast iron gray spray paint for your Firebird or Trans Am. Brings many components back to life. Comes ready to go in an easy to use 12 oz spray can. This is a very good quality paint at a reasonable price. Creates a porcelain-like bond at high temperatures. Resists peeling, loss of adhesion, and blistering. Cast Blast High Temp Hot Spot is perfect for exhaust manifolds, headers mufflers and more. Hi solid formulation allows for more coverage than standard spray. Resists light cleaning solvents such as mineral spirits. It protects against rust, has a low sheen and resists heat up to 1200F continuous. For lower temperature applications, use our Cast Blast Iron Gray, Part # PAI-81.

Suggested Uses:
Headers
Manifolds
Mufflers
Exhaust Pipes

Comes in Fluid 12 oz. Spray Can

PART NUMBER: PAI-82
1967 - 1971 Firebird Correct Black and Aqua Trunk Splatter Paint, ACDelco
1967 - 1971 Firebird Correct Black and Aqua Trunk Splatter Paint, GM / ACDelco
Our Price: $14.95

1967 - 1971 Firebird Correct Black and Aqua Trunk Splatter Paint, GM / ACDelco

GM Trunk Reconditioning Spatter Paint, Black & Aqua. This black and aqua paint is most commonly found in 1967 - 1971 Firebird models. Original GM / ACDelco product in an easy to use 13 Oz. spray can.

2 to 3 cans of GM Trunk Reconditioning Paint is recommended for good coverage.

PART NUMBER: PAI-71
OLD PART NUMBER: TRU-43
1967 - 1973 Firebird LIGHT GREEN and ORANGE Firewall Inspection Marking Paint for PTB Stamps
1967 - 1973 Firebird LIGHT GREEN and ORANGE Firewall Inspection Marking Paint for PTB Stamps
Our Price: $21.90
Sale Price: $19.95
You save $1.95!

1967 - 1973 Firebird LIGHT GREEN and ORANGE Firewall Inspection Marking Paint for PTB Stamps

PTB stamp detail paint set (1) light green and (1) orange 2 oz bottle for 67 - 73 Firebird. This is both the correct green and orange paints for the firewall stamp markings. Supplied in a 2 oz. bottles with paint brush attached to lid. Premium quality! Made in the USA.

***Paint stamps are NOT included***

PART NUMBER: ENC-886
1967 - 1973 Firebird LIGHT GREEN Firewall Inspection Marking Paint for PTB Stamps
1967 - 1973 Firebird LIGHT GREEN Firewall Inspection Marking Paint for PTB Stamps
Our Price: $10.95

1967 - 1973 Firebird LIGHT GREEN Firewall Inspection Marking Paint for PTB Stamps

PTB stamp detail paint kit in light green for 67 - 73 Camaro. This is the correct green for the firewall stamp markings. Supplied in a 2 oz. bottle with paint brush attached to lid. Premium quality! Made in the USA.

PART NUMBER: ENC-886B
1967 - 1973 Firebird ORANGE Firewall Inspection Marking Paint for PTB Stamps
1967 - 1973 Firebird ORANGE Firewall Inspection Marking Paint for PTB Stamps
Our Price: $10.95

1967 - 1973 Firebird ORANGE Firewall Inspection Marking Paint for PTB Stamps

PTB stamp detail paint kit in orange for 67 - 73 Firebird. This is the correct orange for the firewall stamp markings. Supplied in a 2 oz. bottle with paint brush attached to lid. Premium quality! Made in the USA.

PART NUMBER: ENC-886A
1967-1975 Chassis Inspection Detail Marking Paint 2oz. Bottle
1967-1975 Chassis Inspection Detail Marking Paint 2oz. Bottle
Our Price: $10.95

Correct GM assembly line inspection marking paint.  Exact pink in color.  Premium quality.  Made in the USA.

PART NUMBER: ENC-900
1967-1975 Chassis Inspection Detail Marking Paint 2oz. Bottle
1967-1975 Chassis Inspection Detail Marking Paint 2oz. Bottle
Our Price: $10.95

Correct GM assembly line inspection marking paint. Exact brake clip green in color. Premium quality. Made in the USA.

PART NUMBER: ENC-894
1967-1975 Chassis Inspection Detail Marking Paint 2oz. Bottle
1967-1975 Chassis Inspection Detail Marking Paint 2oz. Bottle
Our Price: $10.95

Correct GM assembly line inspection marking paint. Exact crossmember orange in color. Premium quality. Made in the USA.

PART NUMBER: ENC-895
1967-1975 Chassis Inspection Detail Marking Paint 2oz. Bottle
1967-1975 Chassis Inspection Detail Marking Paint 2oz. Bottle
Our Price: $10.95

Correct GM assembly line inspection marking paint. Exact purple in color. Premium quality. Made in the USA.

PART NUMBER: ENC-896
1967-1975 Chassis Inspection Detail Marking Paint 2oz. Bottle
1967-1975 Chassis Inspection Detail Marking Paint 2oz. Bottle
Our Price: $10.95

Correct GM assembly line inspection marking paint. Exact dark green in color. Premium quality. Made in the USA.

PART NUMBER: ENC-897
1967-1975 Chassis Inspection Detail Marking Paint 2oz. Bottle
1967-1975 Chassis Inspection Detail Marking Paint 2oz. Bottle
Our Price: $10.95

Correct GM assembly line inspection marking paint. Exact bright green in color. Premium quality. Made in the USA.

PART NUMBER: ENC-898
1967-1975 Chassis Inspection Detail Marking Paint 2oz. Bottle
1967-1975 Chassis Inspection Detail Marking Paint 2oz. Bottle
Our Price: $10.95

Correct GM assembly line inspection marking paint. Exact grey in color. Premium quality. Made in the USA.

PART NUMBER: ENC-899
1967-1975 Chassis Inspection Detail Marking Paint 2oz. Bottle
1967-1975 Chassis Inspection Detail Marking Paint 2oz. Bottle
Our Price: $10.95

Correct GM assembly line inspection marking paint.  Exact spindle orange in color.  Premium quality.  Made in the USA.

PART NUMBER: ENC-901
1967-1975 Chassis Inspection Detail Marking Paint 2oz. Bottle
1967-1975 Chassis Inspection Detail Marking Paint 2oz. Bottle
Our Price: $10.95

Correct GM assembly line inspection marking paint. Exact dark blue in color. Premium quality. Made in the USA.

PART NUMBER: ENC-893
1967-1975 Chassis Inspection Detail Marking Paint 2oz. Bottle
1967-1975 Chassis Inspection Detail Marking Paint 2oz. Bottle
Our Price: $10.95

Correct GM assembly line inspection marking paint.  Exact redin color.  Premium quality.  Made in the USA.

PART NUMBER: ENC-903
1967-1975 Chassis Inspection Detail Marking Paint Blue 2oz. Bottle
1967-1975 Chassis Inspection Detail Marking Paint Blue 2oz. Bottle
Our Price: $10.95

Correct GM assembly line inspection marking paint.  Exact pitman arm blue in color.  Premium quality.  Made in the USA.

PART NUMBER: ENC-902
1967-1975 Chassis Inspection Detail Marking Paint Bright Yellow  2oz. Bottle
1967-1975 Chassis Inspection Detail Marking Paint Bright Yellow 2oz. Bottle
Our Price: $10.95

Correct GM assembly line inspection marking paint.  Exact bright yellow in color.  Premium quality.  Made in the USA.

PART NUMBER: ENC-905
1967-1975 Chassis Inspection Detail Marking Paint Light Blue 2oz. Bottle
1967-1975 Chassis Inspection Detail Marking Paint Light Blue 2oz. Bottle
Our Price: $10.95

Correct GM assembly line inspection marking paint. Exact light blue in color. Premium quality. Made in the USA.

PART NUMBER: ENC-892
1967-2002 Factory Interior Acrylic Lacquer Paint 12 oz. Spray Can
1967-2002 Factory Interior Acrylic Lacquer Paint 12 oz. Spray Can
Our Price: $14.95

Factory interior acrylic lacquer paint in a 12 oz. spray can for 67-02 models. Please specify color desired.

Note
~ 1967 AND 1969 Parchment (M-27) is sold in a 2 stage paint system, (1) Can Base Coat and (1) Can Top Coat for a perfect color match, add $14.95
~ 1968 Pearl Parchment (M-28) is sold in a 2 stage paint system, (1) Can Base Coat and (1) Can Top Coat for a perfect color match, add $14.95
~ 1969 Is Dark Green Metallic (M-24)
~ Blue (
M-09) is correct for 1971 standard and deluxe, and also other year models

PART NUMBER: PAI-55
3M Super Trim Adhesive
3M Super Trim Adhesive
Our Price: $13.99
Sale Price: $11.99
You save $2.00!

3M Super Trim Adhesive

Aerosol contact adhesive designed for bonding vinyl tops, heavyweight liners and hood silencer pads where high strength and heat resistance are needed. A fast-acting, high-strength, aerosol contact adhesive designed for two surface application. This adhesive is resistant to heat and plasticizing oils and is excellent for attaching vinyl, insulation, foam, padding and rubber parts to metal and other surfaces. Bonds can be made within minutes of application or as long as one hour later. Not recommended for polyethylene, polypropylene, or styrene foam. 19 oz. spray can.

Part Number: PAI-37
72-81 Trunk Gray and White Spatter Paint
72-81 Trunk Gray and White Spatter Paint
Our Price: $9.95

Correct 72-81 Gray and White trunk spatter paint. When installing a trunk mat you should still spatter paint the entire trunk area for that correct look. This great paint comes in an easy to use 12 oz spray can.

PART NUMBER: PAI-72
OLD PART NUMBER: STN-4
Black And Gray Spatter Paint
Black And Gray Spatter Paint
Our Price: $9.95

Black and gray trunk spatter paint.  Easy to use spray can.

PART NUMBER: PAI-73
OLD PART NUMBER: STN-326
Brake Caliper, Drum, and Rotor Paint 11 oz. Spray Can, Each
Brake Caliper, Drum and Rotor Cleaner 11 oz. Spray Can
Our Price: $8.95
Sale Price: $7.50
You save $1.45!

Brake Caliper, Drum and Rotor Cleaner 11 oz. Spray Can

VHT Brake Caliper, Drum and Rotor Cleaner removes brake fluid, grease, oil and other contaminants from brake calipers, rotors and drums. It dries quickly and leaves no residue. This is a great product if you are going to paint your calipers or drums. Use this cleaner to prep before you paint!

Removes grease, oil, dirt
Promotes maximum paint adhesion
Dries without leaving a film

Dry Time: Flashes off in less than 5 minutes.

Part Number: PAI-90
Brake Caliper, Drum, and Rotor Paint 11 oz. Spray Can, Each
Brake Caliper, Drum, and Rotor Paint 11 oz. Spray Can, Each
Our Price: $8.95
Sale Price: $7.95
You save $1.00!

Brake Caliper, Drum, and Rotor Paint 11 oz. Spray Can, Each

VHT Brake Caliper, Drum and Rotor Coatings provide a durable, heat resistant, gloss coating specifically designed for cast iron and aluminum brake applications in your Firebird. Give your calipers, drums and rotors a new custom appearance. This new coating withstands 900°F temperatures, brake dust, salt and corrosion without losing its gloss luster.

Use with PAI-90 Caliper Cleaner to prep before you paint!

Dry Time: Dries to touch in 30 mins. Dries thoroughly overnight.

Several colors are available, please use drop down menu to choose.

Part Number: PAI-20
Distributor Tag Dye Red-Pink, 2 oz. Bottle
Distributor Tag Dye Red-Pink, 2 oz. Bottle
Our Price: $9.95

Add that finishing touch to your ride with this new tag dye.  Comes with an easy to use brush applicator.

PART NUMBER: ENC-906
Dupli-Color® Stainless Steel Coating, 11oz. Spray Paint Can
Dupli-Color® Stainless Steel Coating, 11oz. Spray Paint Can
Our Price: $9.95
Sale Price: $8.95
You save $1.00!

Need that fresh stainless steel look for your Firebird? Here's your answer, in an easy to use spray can. This is a very good quality paint at a reasonable price. Dupli-Color® Stainless Steel Coating provides the brilliant and popular look of stainless steel to automotive accessories, such as trim, grills, and bumpers. Stainless Steel Coating dries quickly to a durable finish and resists temperatures up to 250°F, allowing for under-hood applications. Features excellent adhesion to metal, wood, iron, glass, and most other surfaces. Great for all kinds of parts including, steering wheels and much more!

11oz. Spay Can
Application Humidity Level Less than 60-70%
Application Temperature Between 60°F (16°C) and 95°F (35°C)
Dry to Touch 30 Minutes
Handle In 1 Hour
Paint Type Lacquer

PART NUMBER: PAI-1
Firebird Engine Enamel Paint, Low Gloss Black, Each
Engine Enamel Paint, Low Gloss Black, Each
Our Price: $14.95

New low gloss engine enamel paint in black. Perfect to fresh up your engine compartment look. Comes in an easy to use 11 oz spray can.

PART NUMBER: PAI-84C