|
|
|
|
|
|
12 Bolt Standard Open and Positraction Rear End Differential Cross Pin Shaft
|
|
|
Standard open and posi traction cross pin shaft for GM 12T, 12P, and 55T. Fits all Firebird 12 bolt rear ends.
PART NUMBER: CLU-598
|
|
|
|
|
|
|
|
|
|
1967 - 1968 Firebird 4 Speed Chrome Shifter Knob Ball, 5/16 Inch OE Style
|
|
|
1967 - 1968 Firebird 4 Speed Chrome Shifter Knob Ball
New chrome shifter knob ball for your Firebird. Exact fit for all 5/16" threaded handles. Works great for your Muncie shift 1967 or 1968 model.
PART NUMBER: CON-102
|
|
|
|
|
|
|
|
|
|
1967 - 1968 Firebird Bellhousing Bolt Set ( M Head )
|
|
|
Correct bellhousing bolt set for 67 - 68 models. Correct bolt set to mount your manual transmission bellhousing to the back of the engine block. Replaces GM # 3828782
PART NUMBER: CLU-34
|
|
|
|
|
|
|
|
|
|
1967 - 1968 Firebird Hurst Shifter Linkage Install Kit for Muncie Transmission
|
|
|
1967 - 1968 Firebird Hurst Shifter Linkage Install Kit for Muncie Transmission
If you don't like your original Muncie shifter in your 67 or 68 Firebird this installation kit is for you. Enables you to hook up a Hurst Competition Plus shifter to your 68 or older Muncie transmission. Excellent Hurst linkage and installation kit. Complete kit ready to install your Hurst Competition / Plus shifter to your Muncie transmission. Includes all rods, levers, linkage, bushings, and hardware to get the job done right the first time. Will work great with PART# TRA-71 Shifter. Order yours today!
*Will only work with 68 and older Muncie Transmissions like pictured.
PART NUMBER: TRA-82
|
|
|
|
|
|
|
|
|
|
1967 - 1968 Firebird Muncie 4 Speed Transmission, Rebuilt Original GM
|
|
|
1967 - 1968 Firebird Muncie 4 Speed Transmission, Rebuilt Original GM
Complete original GM Muncie transmission rebuilt and guaranteed for 1 year. Correct fit for all 67 - 68 model Firebirds. This one will have the studs coming out from the side where your shifter linkage mounts. Please don't forget to choose your desired ratio; M-20 or M-21. Most standard production cars had the M-20. If you want to race or speed shift a transmission at 6000 RPMs, don't buy a Muncie transmission. Muncies are great for street driving applications. Factory installed and correct for all 67 - 68 higher performance models. The one you will receive will look similar to the ones pictured.
*Please double check your clutch, pressure plate and rear end set to match below.
67-68 M-20 ~ Input Shaft = 2 Grooves with Coarse 10 Spline Count. 2.52 First Gear
67-68 M-21 ~ Input Shaft = 1 Groove with Coarse 10 Spline Count. 2.20 First Gear
Part Number: TRA-612
|
|
|
|
|
|
|
|
|
|
1967 - 1968 Floor Shifter Cable / Rod Transmission Side Gear Selector Lever
|
|
|
New gear selector lever for your bird. Mounts on the side of your transmission and cable or rod hooks to select gear. This is the technically 67 - 68 firebird version. Works with all floor mounted automatic shifters. Replaces original GM part number 9794309 perfectly.
PART NUMBER: TRA-2026
|
|
|
|
|
|
|
|
|
|
1967 - 1968 Hurst, Four Speed Chrome Shifter Handle
|
|
|
Want to replace just the chrome handle on your shifter? Here's the answer. New 1967 - 1968 Chrome Firebird shifter handle. This is for all hurst competition plus shifter assemblies. It will not work for factory designed shifters. If your shifter main body has two bolts where the handle mounts, then your good to go. Rectangle shape 4-speed chrome shifter handle with "HURST" on the side. Works great for all 67 - 68 Firebird, with or without consoles. Thread size for shifter knob is 3/8.
PART NUMBER: TRA-569A
|
|
|
|
|
|
|
|
|
|
1967 - 1968 Muncie Four Speed Transmission, M-22 Rockcrusher
|
|
|
1967 - 1968 Firebird Muncie Four Speed Transmission, M-22 Rockcrusher
Complete original GM Muncie transmission rebuilt and guaranteed for 1 year. Correct fit for all 1967 - 1968 model Firebirds. This one will have the studs coming out from the side where your shifter linkage mounts. This is the Muncie M-22 Rockcrusher four speed. Designed for the highest performance models. Bulletproof strength with more flat cut gears, makes a beautiful whine. If you want the mack daddy, here it is!
*Please double check your clutch and pressure plate set to match below
67-68 M-22 ~ Input Shaft = 0 Grooves with Coarse 10 Spline Count.
2.20 First Gear and 27 Spline Tail Shaft
PART NUMBER: TRA-615
|
|
|
|
|
|
|
|
|
|
1967 - 1968 Pedal Assembly with Hanger for Automatic
|
|
|
Brake pedal assembly for 67 - 68 Firebird with Automatic transmission. This is a great assembly when converting from 4 SPD to Automatic transmission. Assembly includes pedal mounting bracket hanger, auto brake pedal, pedal pad, pedal pad trim and pad.
PART NUMBER: PPD-38A
|
|
|
|
|
|
|
|
|
|
1967 - 1968 Pedal Assembly, Clutch and Brake
|
|
Currently Unavailable, NO ETA
|
|
|
Clutch & brake pedal assembly for 67 - 68 Firebird with manual transmission. This is a great assembly when converting from automatic to any manual transmission. Assembly includes pedal mounting bracket, clutch pedal, brake pedal, pedal pads, pedal pad trim for both pads and upper clutch push rod.
PART NUMBER: PPD-38
|
|
|
|
|
|
|
|
|
|
1967 - 1969 Automatic Transmission Lower Lockout Rod - 7 Inch
|
|
|
New lower lock out rod for your firebird or trans am. This is the lower or smaller rod that goes from your frame swivel back to the transmission. We have found some discrepancies as far as the applications and models of transmissions this rod will work for. You may want to measure your distance just to be certain. Right at seven inches in length. This is part of the lock out system which allows your car to correctly only start while in park.
Fits;
*All 67 - 68 with automatic trans, column shift
*All 69 with automatic trans, column shift or floor shift
PART NUMBER: TRA-56
|
|
|
|
|
|
|
|
|
|
1967 - 1969 Automatic Transmission Lower Lockout Rod - 8 Inch
|
|
|
New lower lock out rod for your firebird or trans am. This is the lower or smaller rod that goes from your frame swivel back to the transmission. We have found some discrepancies as far as the applications and models of transmissions this rod will work for. You may want to measure your distance just to be certain. Right at eight inches in length. This is part of the lock out system which allows your car to correctly only start while in park.
Fits;
*All 67 - 68 with automatic trans, column shift
*All 69 with automatic trans, column shift or floor shift
PART NUMBER: TRA-57
|
|
|
|
|
|
|
|
|
|
1967 - 1969 Clutch Fork
|
Our Price: $54.95 Sale Price: $49.95 You save $5.00!
|
|
|
Clutch Fork for all 67 - 69 4 SPD Pontiac Firebird models. Manufactured to meet or exceed all original OEM specifications. Great part that functions perfectly for listed applications. Made to original specs for a perfect fit. Order yours today!
~ Please note ~ Your throw out bearing does not seat all the way in the fork. Check the pictures for proper fit.
Note: Bearing not included.
PART NUMBER: CLU-29
|
|
|
|
|
|
|
|
|
|
1967 - 1969 Clutch Pushrod Rubber Dust Boot, Upper Seal Assembly
|
|
|
New correct style clutch push rod firewall rubber boot for your Firebird. Exact fit for all 67 - 69 manual transmission models. This handy rubber seat installs at your firewall and lets the clutch pushrod travel through. Replaces original GM part number 3909071 perfectly.
PART NUMBER: CLU-15
|
|
|
|
|
|
|
|
|
|
1967 - 1969 Clutch Return Spring
|
|
|
1967 - 1969 Clutch Return Spring
New clutch return spring for your 67 - 69 models. Please note that this is truly a Camaro item that can be used on 67 - 69 Firebird models. Fits only Pontiac V8 engines.
Part Number: CLU-25
|
|
|
|
|
|
|
|
|
|
1967 - 1969 Firebird Automatic Trans Interlock Lock Out Bell Crank Subframe Swivel, Used GM 3895290
|
|
|
1967 - 1969 Firebird Automatic Trans Interlock Lock Out Bell Crank Subframe Swivel
Correct automatic transmission interlock lockout bell crank swivel for your Firebird. Exact fit for all 67, 68, or 69 models with a powerglide transmission. Mounts on the side of your sub frame and allows the reverse lock out to work properly. Original GM part number 3895290.
PART NUMBER: TRA-58C
|
|
|
|
|
|
|
|
|
|
1967 - 1969 Firebird Automatic Trans Interlock Lock Out Bell Crank Subframe Swivel, Used GM 3912619
|
|
|
1967 - 1969 Firebird Automatic Trans Interlock Lock Out Bell Crank Subframe Swivel
Correct automatic transmission interlock lockout bell crank swivel for your Firebird. Exact fit for all 67, 68, and 1969 models with a turbo 350 or turbo 400 automatic transmission. Mounts on the side of your sub frame and allows the reverse lock out to work properly. Commonly stamped (N-2619). Original GM part numbers 3912619 and 20329439.
PART NUMBER: TRA-58
|
|
|
|
|
|
|
|
|
|
1967 - 1969 Firebird Clutch Linkage Installation Kit
|
|
|
Complete with everything you need from the clutch pedal to the fork. Included in this kit; upper push rod, 3 rod clips, block side stud, bell crank felts, return spring, clutch fork to bellhousing rubber boot, upper rod boot, frame side bracket, frame side ball stud, lower adjustable rod, extension rod, and bellcrank assembly with pivot kit. Works for Pontiac V8 engines. Don't forget to choose your year for the correct frame bracket
~~ Please note this is technically a Camaro kit. It can be used for Firebirds with slight modification.
PART NUMBER: CLU-2021
|
|
|
|
|
|
|
|
|
|
1967 - 1969 Firebird Floor Shifter Mounting Template
|
|
|
1967 - 1969 Firebird Floor Shifter Mounting Template
All new precision aluminum shifter hole template for your Firebird. This durable formed aluminum template will fit tightly around the transmission tunnel so you can locate the correct hole location for the shifter opening. This template will work for 1967 manual or automatic and all 1968 - 1969 manual shift models.
Please Note ~ Tunnel floor patch panel is not included.
PART NUMBER: CON-1065
|
|
|
|
|
|
|
|
|
|
1967 - 1969 Firebird GM NOS Clutch Pivot Ball Stud
|
|
|
1967 - 1969 Firebird GM NOS Clutch Pivot Ball Stud
This is an original GM NOS ball stud that screws into the side of your engine block. Also know as the clutch pivot stud. This clutch ball features the correct length, original rubber "O"-ring unlike the felt "O"-ring found on most clutch balls available today. Correct for all 1967, 1968, and 1969 Firebirds with a V8 and manual transmission.
Part Number: CLU-2007
|
|
|
|
|
|
|
|
|
|
1967 - 1969 Firebird Transmission Vacuum Modulator Line, TH-350
|
|
|
1967 - 1969 Firebird Transmission Vacuum Modulator Line, TH-350
Transmission Vacuum Modulator Line. LH side for 67, 68, and 69 Firebird models with Turbo-350 ( TH-350 ). Please choose OE or Stainless.
PART NUMBER: TRA-2156
|
|
|
|
|
|
|
|
|
|
1967 - 1969 Firebird Turbo 400 Transmission Crossmember, New Correct Version
|
Our Price: $149.95 Sale Price: $144.95 You save $5.00!
|
|
|
1967 - 1969 Firebird Turbo 400 Transmission Crossmember, New Correct Version
New correct design Firebird TH-400 cross member. Unique for 67, 68, and 69 turbo 400 automatic transmission equipped models. Fresh re-issue of a very hard to find part. Replaces original GM part number 3914856 perfectly. Accurate stamping shape and design from heavy OE gauge steel tubing as original. Bracket is centered on the tube and longer unlike the Camaro crossmember with a shorter, offset mounting bracket. Crisp stamp lines and appearance. Black EDP coated.
Fits all 1967, 1968, 1969 Firebird and Trans Am with TH-400
Part Number: TRA-2102
|
|
|
|
|
|
|
|
|
|
1967 - 1969 Overdrive Transmission Crossmember, 4L80E
|
|
|
New super heavy duty crossmember for your overdrive transmission. Works great for all 4L80E transmissions. Finished in a black powder coat. Includes mounting hardware. The best quality O/D crossmember we've found available.
PART NUMBER: TRA-807
|
|
|
|
|
|
|
|
|
|
1967 - 1969 Overdrive Transmission Crossmember, T56
|
|
|
New super heavy duty crossmember for your overdrive transmission. Works great for T56 transmissions. Finished in a black powder coat. Includes mounting hardware. The best quality O/D crossmember we've found available.
*Designed To Fit 93-97 Firebird or Firebird T56 Transmissions, all others would require modification to crossmember
PART NUMBER: TRA-809
|
|
|
|
|
|
|
|
|
|
1967 - 1969 Transmission Cooler Lines, for Turbo 400, OE Style Steel
|
|
|
New correct design pre-bent transmission lines for your Firebird. Exact fit for all Turbo 400 automatic trans models. Done in original style steel. These lines go from your side radiator tank, down and back to the transmission.
Fits all 67, 68, and 69 Firebirds or Trans Ams with TH-400 trans.
PART NUMBER: TRA-43
|
|
|
|
|
|
|
|
|
|
1967 - 1969 U Joint, Front Powerglide, TH-350, Manual Transmissions
|
|
|
Front u-Joint for 67 - 69 powerglide, TH-350, Manual transmission.
PART NUMBER: TRA-215
|
|
|
|
|
|
|
|
|
|
1967 - 1970 12 Bolt Rear End Posi Unit Carrier Clutch Pack USA
|
|
|
New 12 bolt and posi clutch pack for your Firebird. Exact fit for all 67, 68, 69, and 70 posi units. Includes plates and clutch discs. 14 Plate Composite Clutches for GM 8.2", GM", 12T & 12P. Great rebuild set!
Replaces GM Part#'s 483722 & 231127
PART NUMBER: CLU-597
|
|
|
|
|
|
|
|
|
|
1967 - 1972 Center Kickdown Swivel Linkage For Power Glide
|
Our Price: $104.95 Sale Price: $94.95 You save $10.00!
|
|
|
Correct NEW center kick down swivel linkage bellcrank bracket for 1967 - 1972 Power Glide Transmissions. Mounts on the side of your bellhousing. Exact fit for all power glide transmission equipped cars.
Shown assembled with upper and lower rods for your reference only
PART NUMBER: TRA-62
|
|
|
|
|
|
|
|
|
|
1967 - 1972 Firebird Automatic Transmission Filter With Gasket, Turbo 400
|
|
|
Automatic transmission filter with gasket for 67 - 72 models with Turbo 400. Premium Quality!
PART NUMBER: TRA-877
|
|
|
|
|
|
|
|
|
|
1967 - 1972 Firebird Powerglide Transmission Filter with Gasket
|
|
|
Automatic transmission filter with gasket for 67 - 72 Power Glide models. Premium Quality!
PART NUMBER: TRA-875
|
|
|
|
Deal of the Day
