|
|
|
|
|
|
1982-1992 QA1 Spring, Pro Coil Spring Only
|
|
|
Powder coated, chrome appearing 2 ½” I.D. Coil Springs. Made with the highest quality materials, QA1 springs are strong, consistent and have a long life. All QA1 springs are lifetime guaranteed to remain within 5% of the original free height under normal operating conditions. Sold each.
PART NUMBER: SUS-1118C
|
|
|
|
|
|
|
|
|
|
1982-1992 QA1 Struts, Front Double Adjustable Coil-Over Pro Coil Kit
|
|
|
Whether you are looking for nice ride and handling or a firm ride with great cornering for your 82 - 92 model, QA1 has what you need. The 3rd and 4th Generation F-Body Pro Coil Double Adjustable System allows for independent compression and rebound adjustment, giving you 324 valving options. With a variety of springs, you are sure to find the ride you're looking for.
Kit Includes:
- (2) QA1 Double Adjustable Struts
- (2) Specially Designed Springs
- All Mounting Hardware
NOTE: These struts require the use of Camber Plates, part number SUS-1118P.
PART NUMBER: SUS-1118A
|
|
|
|
|
|
|
|
|
|
1982-2002 QA1 Shock, Rear Double Adjustable Stocker Star
|
|
|
QA1 offers a double adjustable Stocker Star shock for a variety of applications. The double adjustable knobs allow you to choose from 324 valving options to find the ride you want for any situation. Sold each.
PART NUMBER: SUS-1120A
|
|
|
|
|
|
|
|
|
|
"383" Fender Emblem
|
|
|
"383" fender emblem for all models. Sold each.
Part Number: EMB-71
|
|
|
|
|
|
|
|
|
|
"396" Fender Emblems
|
|
|
"396" fender emblems for all models. Excellent quality! Sold as a matched pair.
Part Number: EMB-90
|
|
|
|
|
|
|
|
|
|
"427" Fender Emblem
|
|
|
"427" fender emblem for all models. Sold each.
Part Number: EMB-72
|
|
|
|
|
|
|
|
|
|
"454" Custom Emblems
|
|
|
"454" emblems in red. Will work for all model years. Sold as a pair. Studs on the back are designed for 69 fender location, but you can mount anywhere you like.
Part Number: EMB-156
|
|
|
|
|
|
|
|
|
|
"502" Engine Size Custom Emblems in Red
|
|
|
New custom "502" emblems in red. These will look great on your fender or anywhere you like. Sold in a matched pair.
Part Number: EMB-157
|
|
|
|
|
|
|
|
|
|
"Easy On" Vinyl or Decal Application Gel Solution
|
|
|
Easy On is a water-soluble gel designed to temporarily suspend the tack of pressure sensitive vinyl film adhesive and minimize the appearance of air bubbles during installation. Easy On should be used when applying graphics in extreme heat (above 90F), installing graphics that require exact positioning, or when applying large, hard-to-handle graphics. Unlike soap and water, no filmy residue remains after the solution dries. Sold by the pint.
Part Number: PAI-39
|
|
|
|
|
|
|
|
|
|
"Echoes of Norwood: General Motors Automobile Production During The Twentieth Century" Book by Phillip Borris
|
|
|
Echoes of Norwood. Copyright (c) 2013 by Phillip Borris. The book that goes inside a General Motors Corporation Automotive Assembly Plant, all the way to the factory floor. Here is the story of the men and women of the Norwood Assembly Plant, where most all 67 - 87 firebirds were produced. Profiles all the way from the first car produced in 1923 to the 8 millionth and the last car off the line in 1987. From the "B" body to the "F" car in never before revealed photographs, production data, and personal recollections, all providing a rare glimpse into the inner workings of the automotive industry during the halcyon era of domestic automotive production.
Part Number: LIT-119
|
|
|
|
|
|
|
|
|
|
"Loud Pipes Save Lives" License Plate
|
|
|
"Loud Pipes Save Lives" license plate.
Part Number: GIF-170A
|
|
|
|
|
|
|
|
|
|
"Metal Mask" Single Component Polyurethane Paint Coating - Bare Metal Gray Finish, 1 Pint
|
|
|
Metal Mask is a single component polyurethane coating that makes any metal surface look exactly like new bare metal.
Metal Mask is non-porous and will not crack, chip, or peel when properly applied. It has great scratch and abrasion resistance and its not sensitive to UV light. Follow the directions carefully and you will be rewarded with the finest protective coating for metal available anywhere!
Uses include undercarriage components, gas tanks, steering components, hood latches, hinges, and springs.
PART NUMBER: PAI-41
|
|
|
|
|
|
|
|
|
|
"Metal Mask" Single Component Polyurethane Paint Coating - Bare Metal Gray Finish, 1 Quart
|
|
|
Metal Mask is a single component polyurethane coating that makes any metal surface look exactly like new bare metal.
Metal Mask is non-porous and will not crack, chip, or peel when properly applied. It has great scratch and abrasion resistance and its not sensitive to UV light. Follow the directions carefully and you will be rewarded with the finest protective coating for metal available anywhere!
Uses include undercarriage components, gas tanks, steering components, hood latches, hinges, and springs.
PART NUMBER: PAI-40
|
|
|
|
|
|
|
|
|
|
1156 LED Backup Light Bulb, Ultra Bright WHITE Single Filament, Each
|
Our Price: $19.95 Sale Price: $17.95 You save $2.00!
|
|
|
1156 LED Backup Light Bulb, Ultra Bright WHITE Single Filament, Each
This new WHITE LED bulb has 18 LEDs per bulb for your Firebird. This 1156 single-contact bulb creates a 360° viewing angle for better allover light emission with reduced hot spots. Easy plug-and-play installation, just twist to lock in place. The energy-efficient bulb operates within a 12V DC range and is designed to last 30,000 hours on your car, truck, SUV, or van, 25 times longer than incandescent bulbs. Super Brightness: The luminance is 2 to 3 times stronger than traditional LED bulb. Replaces any standard 1156 bulb. This bulb will replace the standard backup bulbs. Sold each, order yours today!!
Single Filament Bulb
PART NUMBER: LIG-999
|
|
|
|
|
|
|
|
|
|
1157 LED Stop / Turn / Park Light Bulb, Ultra Bright AMBER Dual Filament, Each
|
Our Price: $19.95 Sale Price: $17.95 You save $2.00!
|
|
|
1157 LED Stop / Turn / Park Light Bulb, Ultra Bright AMBER Dual Filament, Each
This new AMBER LED bulb has 18 LEDs per bulb for your Firebird. This 1156 dual-contact bulb creates a 360° viewing angle for better allover light emission with reduced hot spots. Easy plug-and-play installation, just twist to lock in place. The energy-efficient bulb operates within a 12V DC range and is designed to last 30,000 hours on your car, truck, SUV, or van, 25 times longer than incandescent bulbs. Super Brightness: The luminance is 2 to 3 times stronger than traditional LED bulb. Replaces any standard 1156 bulb. This bulb will replace the stop and turn tail light bulbs and the front park light / turn signal bulbs. Sold each, order yours today!!
Dual Filament Bulb
PART NUMBER: LIG-901
|
|
|
|
|
|
|
|
|
|
1157 Ultra Bright LED Light Bulb ( White )
|
|
|
This new LED bulb has 14 LEDs with 3 chips per bulb. Super Brightness: The luminance is 2 to 3 times stronger than traditional LED bulb. Replaces any standard 1157 bulb. This bulb will replace the stop and turn tail light bulbs and the front park light / turn signal bulbs. Sold each, order yours today!!
Dual Filament Bulb
PART NUMBER: LIG-900
|
|
|
|
|
|
|
|
|
|
15 X 6 Wheel Trim Ring, Rally Wheel Style, Each
|
|
|
New 15 x 6 Rally wheel trim ring. Inner clips go all the way around the ring. Outer lip is rounded and valve stem opening is "U" shaped. Correct rally wheel picture shown is for reference only. Sold as each.
Part Number: WHE-100
|
|
|
|
|
|
|
|
|
|
15 x 7 Rally Wheel Trim Rings, Stainless Steel - Set of 4
|
|
|
15 x 7 Rally Wheel Trim Rings, Stepped Edge, Set of 4
New 15 x 7 Rally wheel trim ring for your Firebird. Features the correct stepped edge design, very very close to what was installed on your 15 x 7 inch rally wheels from the factory. Made from premium quality stainless steel. Replaces original GM part number 9796696. Correct wheel application shown is for reference only.
Please look at the pictures shown and make sure this is the version you need.
Part Number: WHE-15
|
|
|
|
|
|
|
|
|
|
15 x 7 Wheel Trim Ring, Rally Wheel Style, Each
|
|
|
15 x 7 Rally Wheel Trim Ring, Stepped Edge, Each
New 15 x 7 Rally wheel trim ring for your Firebird. Features the correct stepped edge design, very very close to what was installed on your 15 x 7 inch rally wheels from the factory. Made from premium quality stainless steel. Replaces original GM part number 9796696. Correct wheel application shown is for reference only.
Please look at the pictures shown and make sure this is the version you need.
Part Number: WHE-15A
|
|
|
|
|
|
|
|
|
|
1967 - 1969 Wheel Bearing and Seal Kit
|
|
|
Wheel bearing kit for 67 - 69 Firebird models. Does both sides. Excellent kit! Great for updating or replacing those worn out originals! 1967 - 1969 Firebird Wheel Bearing and Seal Kit includes inner and outer bearings, inner grease seal, spindle nuts, keyed washers, and dust caps. Does both sides. Excellent kit!
PART NUMBER: BRC-217
|
|
|
|
|
|
|
|
|
|
1967 - 1981 Air Cleaner Assembly, Open Element, Replacement Style: Base, Black Lid, and Filter
|
|
|
New replacement style air filter assembly with contaminant resistant black coated lid for your Firebird. Original look open element design. Correct drop style base, but does not have the vent tube going down toward your valve covers. Exact fit for all four barrel carb models. 14" diameter and 3" height.
Part Number: AIR-872K
|
|
|
|
|
|
|
|
|
|
1967 - 1981 Air Cleaner Assembly, Open Element, Replacement Style: Base, Chrome Lid and Filter
|
|
|
New replacement style air filter assembly for your firebird. Original look open element design. Correct drop style base, but does not have the vent tube going down toward your valve covers. Exact fit for all four barrel carb models. 14" diameter and 3" height.
Part Number: AIR-872
|
|
|
|
|
|
|
|
|
|
1967 - 1981 Firebird 10mm Rear Disc Brake Conversion Flex Hose, PAIR
|
Our Price: $36.95 Sale Price: $35.95 You save $1.00!
|
|
|
1967 - 1981 Firebird 10mm Rear Disc Brake Conversion Flex Hose, PAIR
New Rear Disc Conversion Flex Hose. Fit most Firebird, Camaro Chevelle and Nova rear disc conversion calipers. These hoses are for calipers with 10mm bolt hole size, sold in a PAIR for both LH and RH rear disc brake calipers. Order yours today!
Includes (2) Hoses and (2) U-Clips
PART NUMBER: BRC-458
|
|
|
|
|
|
|
|
|
|
1967 - 1981 Firebird Detroit Speed Rebound A-Arm Bumpers Stoppers
|
|
|
New high grade DSE bump stops for your Firebird. Exact fit for all 67 - 81 models. These polyurethane bumpers can be used for jounce and rebound control for your control arms. The bumper dimensions are 1 9/16" tall and 1 5/8" base diameter. They are sold in pairs only.
*Works great for all
- 67 - 69 upper or lower a arms
- 70 - 81 lower a arms
PART NUMBER: SUS-383
|
|
|
|
|
|
|
|
|
|
1967 - 1981 Firebird Ribbed Top CHROME Master Cylinder for Power Brakes
|
Our Price: $129.95 Sale Price: $104.95 You save $25.00!
|
|
|
1967 - 1981 Firebird Ribbed Top CHROME Master Cylinder for Power Brakes
New ribbed top aluminum master cylinder in chrome for your Firebird. Universal fit for all 67 - 81 models with power drum or power disc front brakes. Super nice and clean. A great replacement for your original power brake master cylinder.
Ribbed Top
1-1/8" Bore
4-Port (9/16" & 1/2")
Chrome-Plated Aluminum
Part Number: BRC-986R
|
|
|
|
|
|
|
|
|
|
1967 - 1982 Locks Set, Doors, Short Cylinder 7/32 Inch, GM Later Style Round Head Keys
|
|
|
New door locks and keys set for your Firebird. This is the correct door lock set for all 67 - 82 models. Only the door lock pawls are different. Includes two GM style round headed keys and retaining clips. Small cylinder length is 7/32 of an inch.
NOTE:
For 67-68 models use the DWN-268 and DWN-269 style door lock pawls.
For 69 models use the DWN-2050 and DWN-2051 style door lock pawls.
For 70-81 models use the DWN-2052L and DWN-2052R door lock pawls.
Part Number: DWN-235
|
|
|
|
|
|
|
|
|
|
1967 - 1987 Oil Pressure Sending Unit Switch for Cars with Gauges
|
|
|
New correct original style design oil pressure sending unit. Exact fit for all 1967 - 1987 Firebird models with an OIL GAUGE. A must have when adding an oil gauge to any model. Make sure your oil gauge is reading accurately with this new Oil Pressure Sending Unit, order your today!
Details:
- Connector Gender: Male
- Terminal Gender: Male
- Working Pressure (psi): 0 To 80 psi
- Terminal Type: Blade
- Thread Size: 1/8-27 Inch
- Number Of Terminals: 1
Part Number: ENC-1063
|
|
|
|
|
|
|
|
|
|
1967 - 1988 Under Hood to Cowl Ground Strap
|
|
|
Brand new Firebird Under Hood to Cowl Ground Strap. This mounts to the firewall cowl and grounds the hood to the body of car. This strap eliminates static electricity that interferes with In-Vehicle Radios. Some cars use 1, but some models use up to 3. These are commonly missing or broken. Please refer to assembly manual for your specific model. Made In The U.S.A.
PART NUMBER: ENC-22C
|
|
|
|
|
|
|
|
|
|
1967 - 1989 Firebird NK1 Large Comfort Grip Steering Wheel, Black
|
|
|
1967 - 1989 Firebird NK1 Large Comfort Grip Steering Wheel, Black
New steering wheel for your classic. This NK1 wheel was originally a factory option for all 1969 Camaro models. Commonly referred to as the cushion grip or comfort grip wheel. It can be added to any year model you prefer. Great looks with a classic feel.
The 16" outside diameter NK1 steering wheel was standard on the 1970 Chevelle, Nova and Buick models. The NK1 instead used a textured, hard vinyl outer coating with a stainless steel metal band around the perimeter. It's interesting to note that although this steering wheel was available in several colors for the Buick, the Chevrolet version of the wheel was only available in black! Also note that while Chevrolet referred to this wheel as the "Cushioned Rim" steering wheel, Buick referred to it as the "Rallye" steering wheel. It's also referred to as the "Comfort Grip" steering wheel.
Note: This is the larger version of the correct comfort grip GM made. Commonly found on Chevelle, Buick, Nova and more. Measures 15" diameter from the center to center of the grip and with a depth measurement of 2 and 7/8 inches.
PART NUMBER: STE-96A
|
|
|
|
|
|
|
|
|
|
1967 - 1989 Firebird NK1 Small Comfort Grip Steering Wheel, Black
|
|
|
1967 - 1989 Firebird NK1 Small Comfort Grip Steering Wheel, Black
New comfort grip steering wheel for your Firebird. This NK1 wheel was originally a factory option for all 1969 Firebird models. Commonly referred to as the cushion grip or comfort grip wheel. It can be added to any year model you prefer. Great looks with a classic feel.
The 15" outside diameter NK1 steering wheel was standard on the 1969 through 1975 Corvette, optional on the 1969 Camaro, 1970 Chevelle, Monte Carlo, and full-size passenger cars, and optional on the 1971 through 1975 Buick GS. While being the same basic design as the 1969 wood-grained steering wheel, the NK1 instead used a textured, hard vinyl outer coating with a stainless steel metal band around the perimeter. It's interesting to note that although this steering wheel was available in several colors for the Buick, the Chevrolet version of the wheel was only available in black! Also note that while Chevrolet referred to this wheel as the "Cushioned Rim" steering wheel, Buick referred to it as the "Rallye" steering wheel. It's also referred to as the "Comfort Grip" steering wheel.
Note: This is the smallest version of the correct comfort grip GM made. Commonly found on Camaro, Corvette, Nova and more. Measures 14" diameter from the center to center of the grip and with a depth measurement of 2 and 7/8 inches.
PART NUMBER: STE-96
|
|
|
|
Deal of the Day
