 |
 |
 |
|
1970 - 1981 Speed Tech Firebird Chicane Coil Over Conversion Kit with Ride Tech Single Adjustable Coil Overs
The ability to properly setup the chassis and tune to individual track conditions is one of the basic fundamentals for achieving low lap times. Adjustable spring rate, ride height, and shock dampening are a vital part of that tuning process. True coilover shocks allow for all these to be done in one easily adjustable package, while avoiding issues where other coil and shock combinations fall short. Speedtech created the Chicane Coilover Kit for 2nd Gen Camaros and Firebirds so that coilover shocks can be installed and put to use in your factory frame!
Designed to be welded in place of the factory upper shock mount this 70 - 81 F body kit converts the factory shock mount to a double sheer coilover mount for use with coilovers with a t-bar lower mount. Unlike other kits on the market, being able to make tuning adjustments without removing any components from the vehicle was a primary design goal for the Chicane coilover kit. It allows easy on-car adjustment of rebound, compression, and ride height up to 2 1/2". Since the factory upper control arm mounting bracket remains unaltered, the kit can be used with factory stock or Guldstrand modified frames. Engine removal is not a requirement for installation. Welding of the Chicane coilover kit is basic and straight forward, and can be completed by a certified welder within an hour. The complete kit includes Ride Tech Single adjustable coilover shocks.
Fits: All 70, 71, 72, 73, 74, 75, 76, 77, 78, 79, 80 and 81 models
*Note* Typically small block/ LS engine kits will come with 550 lb. springs, big block applications will come with 650 lb. springs.
* Warning! It IS NOT SAFE to install coilover shocks on factory stamped steel front lower control arms! To properly handle the forces exerted by a coilover on the shock mount, be sure you have compatible heavy duty lower control arms
PART NUMBER: SUS-556B
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- Complete Chicane Kit includes:
- 2 weld-in double sheer laser cut cages with formed stiffener plate.
- Coilover spacer.
- Ride Tech Single Adjustable coilover shocks.
- Spanner Wrench and Thrust Bearing kit.
- All necessary hardware.
|
|
|
|
|
|
| Other great products you might need |
|
|
|
|