You are here:Home > Transmission & Clutch > Clutch
Sort By:
Page of 2
12 Bolt Standard Open and Positraction Rear End Differential Cross Pin Shaft
12 Bolt Standard Open and Positraction Rear End Differential Cross Pin Shaft
Our Price: $17.95

Standard open and posi traction cross pin shaft for GM 12T, 12P, and 55T.  Fits all Firebird 12 bolt rear ends.

PART NUMBER: CLU-598
1967 - 1968 Firebird Bellhousing Bolt Set ( M Head )
1967 - 1968 Firebird Bellhousing Bolt Set ( M Head )
Our Price: $9.95

Correct bellhousing bolt set for 67 - 68 models.  Correct bolt set to mount your manual transmission bellhousing to the back of the engine block.  Replaces GM # 3828782

PART NUMBER: CLU-34
1967-1970 12 Bolt Rear End Posi Unit Carrier Clutch Pack USA
1967 - 1970 12 Bolt Rear End Posi Unit Carrier Clutch Pack USA
Our Price: $229.95

New 12 bolt and posi clutch pack for 67 - 70 Firebird. Includes plates and clutch discs. 14 Plate Composite Clutches for GM 8.2", GM", 12T & 12P.

Replaces GM Part#'s 483722 & 231127

PART NUMBER: CLU-597
1967 - 1979 Engine Fan Blade to Fan Clutch Bolt Kit with OE Heads
Our Price: $5.95

New correct set of bolts to mount your engine fan to the fan clutch.  Exact fit for all models that have a fan clutch.  Fits all 67 - 79 Pontiac engines 326 / 350 / 400 / 455 in Firebirds and Trans Ams.  These bolts feature the correct oe style notched heads.  Perfect for your concours restoration.  Sold as a matched set of four.

Part Number: ENC-2027
1967 - 1981 Clutch Kit with Pressure Plate, 11 Inch, Fine Spline
Our Price: $189.95

New clutch and pressure plate kit for your larger 11 inch bellhousings.  Kit includes clutch disc, matched pressure plate, clutch-alignment tool and throwout release bearing.  This clutch was originally found on most 1971-1981 Firebirds with an 11" clutch. Please check your clutch and spline size before ordering.  Over the years the bellhousing and clutch might have been changed.

Clutch Size: 11"
Spline: 1 1/8-26

PART NUMBER: CLU-46B
1967 - 1981 Engine Water Pump Lift Hook
1967 - 1981 Engine Water Pump Lift Hook Bracket
Our Price: $5.95

New correct style engine lift hook for your 67 - 81 bird. Exact fit and factory installed on all firebird and trans am models. Mounts onto your water pump with ease.

Part Number: ENC-2027E
1967 - 1981 Firebird Grease Zerk Fitting for Clutch Z-Bars
Our Price: $1.95

Replace your old worn out zerk fitting instead of buying a new Z-bar.  Fits Z-bars Bellcranks 67 - 81 all 4 SPD models.

PART NUMBER: CLU-8F
1967 - 1981 Pressure Plate Bolts
1967 - 1981 Pressure Plate Bolts
Our Price: $9.95

New clutch pressure plate bolts for your firebirds and trans ams.  Exact fit for all 67 - 81 manual transmission equipped models.

Part Number: CLU-910
1967 - 2002 Clutch Pilot Bushing, Chevy Engines
Our Price: $4.95

New Clutch Pilot Bushing for your bird.  Exact fit for all 1967 - 2002 Firebird and Trans Ams with Chevrolet engines.  Order yours today!!

Inside Diameter      (IN): 0.593
Outside Diameter   (IN): 1.093

PART NUMBER: CLU-737
1967 Clutch Z Bar Frame Side Bracket Correct Style
1967 Clutch Z Bar Frame Side Bracket Correct Style
Our Price: $22.95

Clutch Z bar frame side bracket.  Correct style.  Exact shape, size, and dimensions.

PART NUMBER: CLU-59
1967-1969 Clutch Bellcrank
Our Price: $39.95

Clutch bellcrank for 67-69 models.  Fits all Pontiac V8 engines.  Includes fitting for grease and installed pivot ball.

Part Number: CLU-8
1967-1969 Clutch Fork
Our Price: $49.95

Clutch Fork for 67-69 Firebird.

Part Number: CLU-29
1967-1969 Clutch Linkage Install Kit
Our Price: $99.95

Complete with everything you need from pedal to clutch fork.  Excellent quality!  Included in this kit; upper push rod, 3 rod clips, block side stud, bellcrank felts, return spring, clutch fork to bellhousing rubber boot, upper rod boot, frame side bracket, frame side ball stud, lower adjustible rod, extention rod, and bellcrank assembly with pivot kit.  Fits all Pontiac V8 engines.

Part Number: CLU-1
1967-1969 Clutch Lower Adjustment Rod Assembly
1967-1969 Clutch Lower Adjustment Rod Assembly
Our Price: $16.95

New clutch lower adjustment rod for your 67-69 models.  Fits all Pontiac V8 engines with a manual transmission.

Part Number: CLU-20
1967-1969 Clutch Push Rod Firewall Boot imported
Our Price: $8.95

67-69 Clutch Push Rod Firewall Boot.

Part Number: CLU-15
1967-1969 Clutch Return Extension Rod
Our Price: $5.95

New correct design clutch return extension rod.  Exact fit for all four speed models.

Part Number: CLU-23
1967-1969 Clutch Return Spring
Our Price: $5.95

Clutch return spring for 67-69 models.  Fits all Pontiac V8 engines.

Part Number: CLU-25
1967-1969 Clutch Upper Push Rod
Our Price: $16.95

Clutch push rod Year(s): 67 68 69

Part Number: CLU-5
1967-1969 Clutch Pivot Ball and Stud
1967-1969 Clutch Z Bar Pivot Ball and Stud - Sub Frame Side
Our Price: $11.95

New clutch Z-Bar pivot ball and stud.  This is the ball that installs into your Z bar and mates with the sub frame bracket.  Replaces original GM part number 389861 perfectly.  Exact fit for all 67 - 69 models.

PART NUMBER: CLU-13
1967-1969 Clutch Z-Bar Frame Bracket
Our Price: $12.95

Clutch Frame Side Bracket.

Part Number: CLU-18
1967-1981 Clutch and Pressure Plate Kit 10.5 Inch
1967-1981 Clutch and Pressure Plate Kit 10.5 Inch
Our Price: $159.95

New clutch set for your 10.5" bellhousings.  Kit includes clutch disc, matched pressure plate, and throwout release bearing.

PART NUMBER: CLU-736
1967-1981 Clutch and Pressure Plate Kit 11 Inch
1967-1981 Clutch and Pressure Plate Kit 11 Inch
Our Price: $189.95

New clutch and pressure plate kit for your larger 11 inch bellhousings.  Kit includes clutch disc, matched pressure plate, and throwout release bearing.

PART NUMBER: CLU-46
1967-1981 Clutch Bellcrank Pivot Felts, Pair
Our Price: $2.95

Clutch bellcrank pivot felts for 67-81 models.  Sold as a pair.

PART NUMBER: CLU-421
1967-1981 Clutch Disc Alignment Pilot Tool for Coarse Spline Transmission
1967-1981 Clutch Disc Alignment Pilot Tool for Coarse Spline Transmission
Our Price: $5.95

New clutch disc alignment tool.  Exact fit for all coarse, ten spline input shafts.  Clutch disc alignment tool for your clutch disc.

PART NUMBER: CLU-47
1967-1981 Clutch Disc Alignment Pilot Tool for Fine Spline Input Shaft
1967-1981 Clutch Disc Alignment Pilot Tool for Fine Spline Input Shaft
Our Price: $5.95

New clutch disc alignment tool.  Exact fit for all fine 26 spline input shafts.  Clutch disc alignment tool for your clutch disc.

PART NUMBER: CLU-47F
1967-1981 Clutch Firewall Cover and Seal
Our Price: $17.95

Metal plate with seal to cover hole opening where your clutch push rod would travel through your firewall.

PART NUMBER: CLU-17
1967-1981 Clutch Firewall Pushrod Rubber Boot or Cover Plate Screws
Our Price: $1.95

Clutch firewall pushrod rubber boot or cover plate screws for 67-81 models.  Sold as a pair.

PART NUMBER: CLU-735
1967-1981 Clutch Fork Ball/Bellhousing Stud
Our Price: $13.95

Correct USA made bellhousing/ball stud for 67-81 models. The ball stud srews into the bellhousing for the clutch fork to ride on.

PART NUMBER: CLU-31
1967-1981 Clutch Fork Bellhousing Rubber Boot
Our Price: $8.95

Clutch Bellhousing Boot for 67-81 Firebird.

Part Number: CLU-48
1967-1981 Clutch Pivot Ball and Stud
Our Price: $11.95

This is the stud that screws into the side of your engine block.  Also know as the clutch pivot stud.

Part Number: CLU-12
1967-1981 Clutch Throwout Bearing
1967-1981 Clutch Throwout Bearing
Our Price: $24.95

Clutch throwout bearing for 67-81 models.

PART NUMBER: CLU-77
1967-1981 Clutch Z Bar Bellcrank and Shifter Rod at Lever Retaining Clip - Each
1967-1981 Clutch Z Bar Bellcrank and Shifter Rod at Lever Retaining Clip - Each
Our Price: $1.15

New clutch z bar bellcrank and shift rod retaining clip.  Exact fit for all manual transmissions.  Several of these handy clips can be found on your car.  Regular four speed transmission sets require three at the z bar and one on each shifter rod where it secures on the levers.  Sold as each.

Part Number: CLU-733
1967-1981 Clutch Z Bar Bellcrank and Shifter Rod at Lever Retaining Clips - ( 3 Piece Set )
1967-1981 Clutch Z Bar Bellcrank and Shifter Rod at Lever Retaining Clips - ( 3 Piece Set )
Our Price: $3.00

New clutch z bar bellcrank and shift rod retaining clip.  Exact fit for all manual transmissions.  Several of these handy clips can be found on your car.  Regular four speed transmission sets require three at the z bar and one on each shifter rod where it secures on the levers.  Sold in a THREE PIECE set.

Part Number: CLU-733S
1967-1981 Clutch Z Bar Repair Kit
1967-1981 Clutch Z Bar Repair Kit
Our Price: $39.95

Complete kit to repair your old Z bar.  Correct nylon ball seats, frame side retainer clip, felts, frame side ball stud, block side ball stud, and grease fitting.  Great kit to get things shifting smooth.

PART NUMBER: CLU-74
1967-1981 Clutch Z-Bar, Bellcrank Ball Seat, and Pivot Kit
Our Price: $6.95

Correct three nylon ball seats and frame side retainer clip for 67-81 models.  Premium quality!

PART NUMBER: CLU-73
1967-1981 Flywheel Dust Cover Bolt Set
Our Price: $3.95

Correct flywheel dust cover bolt set.  Exact fit for all 67-81 models with manual and automatic transmissions.  Four piece kit.

Part Number: CLU-882
1967-1981 Four Speed Transmission Clutch Bell Housing Kit
1967-1981 Four Speed Transmission Clutch Bell Housing Kit
Our Price: $259.95

Brand new manual transmission bell housing kit for your Pontiac. This set includes a brand new exact bell housing, lower inspection plate cover panel, clutch fork rubber boot, clutch fork ball stud, correct bell housing to engine block mounting bolts, and dust cover to housing hardware. All pieces are brand new and in excellent condition. This bell housing will fit 10.5" or 11" clutch.

Part Number: CLU-2001

1967-1981 Manual Trans Flywheel Bolts - ( Chevy Style )
Our Price: $11.95

New manual transmission flywheel bolt set for your bird.  Exact fit for all 67-81 models that have a chevy engine.

Part Number: CLU-912
1967-1981 Manual Trans Flywheel Bolts - ( Pontiac )
Our Price: $14.95

New manual transmission flywheel bolt set for your bird.  Exact fit for all 67-81 models that have a Pontiac engine.

Size: 1/2-20 x 1"

Part Number: CLU-2912
1967-1981 Manual Transmission Aluminum Bell Housing OE Style
Our Price: $189.95

New correct design, all aluminum pontiac bell housing. Will work with Muncie, Saginaw and Borg Warner transmissions. This is the right bell housing for all 8 cylinder equipped Firebird & Trans Am models. High quality aluminum just as GM made it. This bell housing will fit 10.5" or 11" clutch.

Part Number: CLU-2002