 |
 |
 |
|
1982 - 1992 Firebird Complete Molded Floor Carpet Set, Passenger and Rear Trunk Hatch Cargo Area with MASS BACKING
Made in the U.S.A.
If you want the best front and rear carpet set available for your 3rd generation Firebird, here it is. This molded carpet set is for all 82, 1982, 83, 1983, 84, 1984, 85, 1985, 86, 1986, 87, 1987, 88, 1988, 86, 1989, 90, 1990, 91, 1991, 1992 and 92 Firebird Models. Convertible models with require trimming of the cargo area. This new designed carpet is the best of both worlds. It's has the factory look but with an updated heat and sound deadener pre-applied to the backing!
Note: See Extended Information Tab for Factory Color Options By Year.
Features the correct more full Cut Pile with a ACC Heavy Mass Backing pre-installed. Looks crisp and extra defined once installed. With the Heavy Mass Backing its gives you a much more quiet inside and is much easier to install. Exact factory style rubber heel pad, and dimmer switch grommet included. Strongly recommended for anyone that wants the best for their ride.
~~Don't forget to pick your year 82-84 or 85-92 and your desired color choice.
Mass Backing Features:
- Great sound and heat barrier.
- Increases the overall look of the carpet after installation.
- Approximately 45 mil thick EVA material.
The Best Carpet Available for your 82-92 Firebird on the Market!
*Must select year & color from drop-down menu
Part Number: INT-1155
- READ FULL INSTRUCTIONS BEFORE BEGINNING, Instructions may vary for multi-piece sets
1. Remove new product from box. Lay flat and pop contours back into place. Allow a few hours for product to relax back into proper shape. Check material for accuracy.
2. Compare new and old carpet. (New product may have excess material on outer edges.)
3. In some applications it may be necessary to use old carpet as a template for console cuts.
4. IMPORTANT: Fold new product in half from front to rear. Place in vehicle lining up molded contour to seat risers or any other identifiable starting point on both driver and passenger sides. Once fitted, continue installation.
5. Roll product forward making any cuts needed for brackets, shifters and heater vents etc. while maintaining proper alignment on seat risers or other starting point.
6. Next, cut in center at firewall to allow product to go underneath dash.
7. Continue same procedure for remainder of installation – working your way to outer edges.
8. Once product is properly fitted you are now ready to do the final trimmings on outer edges, seat belts and holes etc.
*Note: Applying adhesive to hold product in place is generally not necessary. If desired, only apply a light brush or spray adhesive after correct dry fit has been obtained.
Third Gen Camaro and Firebird Factory Color Options
C=Camaro
F=Firebird
Note: Russet/4896 has been Discontinued
|
Model Year
|
82
|
83
|
84
|
85
|
86
|
87
|
88
|
89
|
90
|
91
|
92
|
|
DK Blue/ 7130
|
C/F
|
|
|
|
|
|
|
|
|
|
|
|
Med Doeskin/7295
|
C/F
|
C/F
|
C/F
|
F
|
C/F
|
C/F
|
F
|
C/F
|
|
C/F
|
|
|
DK Briar Brown /7500
|
C/F
|
C/F
|
C/F
|
|
|
|
|
|
|
|
|
|
Blue/7625
|
C/F
|
C/F
|
F
|
|
|
|
|
|
|
|
|
|
Black/801
|
C/F
|
C/F
|
C/F
|
C/F
|
C/F
|
C/F
|
C/F
|
C/F
|
C/F
|
C/F
|
C/F
|
|
Jade/8042
|
C/F
|
|
|
|
|
|
|
|
|
|
|
|
Silver/8046
|
C/F
|
|
|
|
|
|
|
|
C
|
|
|
|
Charcoal/897
|
C/F
|
C/F
|
C/F
|
|
|
|
|
|
|
|
|
|
Almond/1251
|
|
|
C
|
C
|
|
F
|
|
|
|
|
|
|
Russet/4896
|
|
|
|
C/F
|
C/F
|
|
|
|
|
|
|
|
Medium Beige/9777
|
|
|
|
C/F
|
C/F
|
F
|
F
|
C/F
|
|
|
F
|
|
Flame Red/8801
|
|
|
|
C/F
|
|
C/F
|
C/F
|
C/F
|
C/F
|
C/F
|
C
|
|
Dove Gray/ 877
|
|
|
|
C/F
|
C/F
|
C/F
|
C/F
|
C/F
|
C/F
|
C/F
|
C/F
|
|
DK Red/ Carmine/7039
|
|
|
|
C/F
|
C/F
|
C/F
|
C/F
|
C/F
|
|
|
|
|
Oxblood/4305
|
|
|
|
|
F
|
F
|
C
|
|
|
|
|
|
Cognac/9205
|
|
|
|
|
|
|
C
|
C/F
|
F
|
|
|
|
Maroon/825
|
|
|
|
|
|
|
|
|
C
|
|
|
ACC guarantees all of our products to be free from defects in material and workmanship for a period of one year. (Normal wear from use excluded from this guarantee.) ACC will issue a replacement or credit for any defective carpet sets, except those damaged in shipping.
Please contact our Customer Service Dept. and we will work with ACC to promptly handle your case.
*NOTE: PLEASE INSPECT EACH CARPET SET PRIOR TO INSTALLATION. CARPET SETS CANNOT BE RETURNED AFTER BEING CUT, TRIMMED, GLUED, OR ALTERED IN ANY MANNER.
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- Best fit, Best feel, Best looks and Best install
- Passenger and Rear Cargo Hatch Complete Set
- Made in the USA!
- Correct Original Style Front and Rear Carpet Set
- Heavy Mass Backing
- Holds Mold and Shape Better
- Correct Heel Pad
- Cutpile Premium Quality Carpet
|
|
|
|
|
|
| Other great products you might need |
|
1982 - 1984 Firebird Molded Floor Carpet, Passenger Area Only, All Models
|
|
1982 - 1992 Firebird Interior Rear Hatch Cargo Panel Plastic Trim Screw, Each
|
|
1982 - 1992 Firebird Molded Floor Carpet Set, Passenger Area Only with MASS BACKING
|
|
1982 - 1984 Firebird or Trans Am Rear Hatch Trunk Area Cargo Carpet
|
|
|
|
|
|
|
|
|
|
|
|
|
1982 - 1992 Firebird Floor Carpet, Molded Rear Trunk Cargo Hatch Area Set, All Models with MASS BACKING
|
|
1982 - 1984 Firebird Molded Passenger and Rear Trunk / Hatch Area Set, Coupe
|
|
1982 - 1992 Firebird Rear Trunk Hatch Area 8 Piece Felt Trim Felt
|
|
1982 - 1992 Firebird Door Jamb Sill Plate Screws Set, Black, 10 Pieces
|
|
|
|
|
|
|
|
|
|
|
|
|
1985 - 1992 Firebird Rear Trunk Hatch Area Cargo Carpet
|
|
1982 - 1992 Firebird Door Jamb Sill Plate, NEW PAIR, Choose Color
|
|
1982 - 1992 Firebird or Trans Am Floor Carpet Heat and Sound Deadening Set
|
|
1982 - 2002 Firebird & Trans Am Antenna, Custom Shorty 8 Inch with BLACK FINISH
|
|
|
|
|
|
|
|
|
|
|
|
|
1987 - 1992 Firebird and Trans Am Body Side Trim Molding Set with Pointed Ends
|
|
1982 - 1992 Firebird Window Felts Set Inners And Outers Set, 4 Pieces
|
|
1985 - 1992 Firebird Floor Carpet, Molded Passenger Area Set, All Models
|
|
|
|
|
|
|
|
|
|
|
|
|