|
|
|
|
RFID Push Button Start System for Vehicles with Power Door Locks and Accessories, PBS-II
Get the latest technology for your classic Firebird with this new push button start system.
The
Digital Guard Dawg PBS-II Push Button Start system expands your
possibilities with 5 programmable output channels to remotely control
power locks, shaved doors, power windows and remote trunk release all
from a single iTag transmitter. Using advanced RFID technology (Radio
Frequency Identification) just like that on found on the world’s finest
luxury vehicles, the PBS-II completely eliminates your vehicles ignition
key switch and provides proximity controlled automatic operation of
your entire Ignition. Simply carry one of the systems digital RFID
“iTags” with you. As you come into proximity of your vehicle, the PBS-II
verifies your identity, authorizes your ignition and with just the
“Push of a Button” your engine roars to life! When you arrive at your
destination, another push turns your engine off and you just walk away. 5
remote operated output channels put complete control of all your power
accessories right at your fingertips. If you’re building something
special and needing one unit that can do it all, the PBS-II is just what
you’re looking for!
FITMENT: Pre 1998 vehicles with power accessories.
Must Choose Start Button Color and Button Size (22mm or 25mm Hole Size)
Employing
the latest technologies and innovations, we design and manufacture
keyless ignition systems for cars. Not only do our systems protect, but
they provide the ultimate in customer convenience and excitement!
PBS-II Push Button Start System Installation Instructions (PDF)
Part Number: ENC-1351
Check this video out for more information!
- The ITags allow you to have control of 2 momentary channels, 2 channels
- that can be programmed to be either latching or momentary and 1
- proximity based channel. All outputs are negative triggers.
- The installation is very straight forward, for basic system
- functionality it only requires 7 wires. It does require identifying
- wires and making connections but is very self-explanatory.
- We recommend changing your batteries once a year, depending on use you
- can expect to get 1-3 years out of your iTag batteries.
- The PBS-Ii comes with one iTag, to add additional iTags please select
- how many you would like from the drop down.
- The PBS-ii systems will work with diesel vehicles, In the programming
- features of the PBS-ii you are able to set a starter delay if you need
- to give your glow plugs a moment to prime.
- Our iTags use a standard CR2032 battery, these can be found at any
- dealership, retail or hardware store.
- Your iTags can be programmed to as many push button start systems as you
- want, giving you the ability to only carry 1 iTag with you and hop into
- which ever vehicle you feel like driving that day.
- The PBS-ii has a programmable feature that will allow you to set up a
- starter delay to give your fuel pump to prime.
- Each system comes with an owners card that has a 4 digital pin code, on
- the back of the owners card there are instructions on how to enter the
- emergency bypass mode, once you are in emergency bypass mode you just
- enter your 4 digital pin code and the system will allow you to start the
- vehicle up.
- You can use any momentary 12V button, we can also modify buttons to work
- with our system, just give us a call at 877-246-5395 and we can assist
- you with making sure your vehicle has the look you are wanting it to
- have.
- The iTags use non-volatile memory, meaning that they will never lose
- their programming if power to either the key fob itself or the module is
- lost.
- Our unit is a stand-alone piece and will definitely work with your
- Dakota digital.
- Our system has built in filtering for MSD ignitions, our system will
- definitely work vehicles equipped with MSD ignition systems.
- Specs:
- Module Size 5.5” X 3” X 1.25”
- Weight 12 oz
- Operating Voltage 12 Volt
- Current Handling 4 x 60A
- Current Max 300A in-rush
- Accessory Circuits
iTAG TransponderThe
RFID iTag represents a true innovation in vehicle security &
convenience. It will only authorize your Ignition when you are within
close range of your vehicle. Each iTag is completely unique with over 6
billion different codes. Each of the iTags™ hidden buttons is able to
operate two individual feature channels by sensing the difference
between a “Short Push” or a “Long Push”. These four independent
selectable feature channels are user programmable (either Latched or
Pulse) so they can be used for virtually any option such as Remote
Keyless Entry, Shaved Door “Pop” (single/dual), Remote Trunk release,
Automatic Window Roll up, Lighting or Video activation or whatever else
you can dream up. In addition, the PBS II has a 5th “Proximity Channel”
that activates automatically when you approach your vehicle. This
channel can be used to activate lighting or any other device you choose.
iTags have “dual mode operation” which allows you to select whether the
iTag™ operates in Manual or Automatic mode allows you to control what
features YOU want to operate at a car show while still keeping your
vehicle completely protected. iTags are powered by an easily replaceable
lithium battery that lasts over a year. An unlimited number of iTags
can be programmed into each system and a single iTag can be programmed
to work every vehicle you own. Five Independent Feature Control ChannelsFour
channels are user programmable (either Latched or Pulse) and can be
used for virtually any option such as Remote Keyless Entry, Shaved Door
“Pop” (single/dual), Remote Trunk release, Automatic Window Roll up,
Lighting or Video activation, and a 5th “Proximity Channel” that
activates automatically when you approach your vehicle, provides endless
versatility to create customize operation of whatever you can dream up. Start Button with LED Status IndicatorPBS
Systems come standard with our 22mm Billet style Start Button, It is a
top quality / heavy duty cycle switch with an attractive “soft brushed”
finish. An Illuminated halo LED ring indicates system status. Switches
are pre-wired to a 36″ plug in harness. Available in 3 LED colors; RED,
BLUE or GREENAdvanced System Control Module The
system control module has 60A high current relays right on board,
eliminating all unsightly and failure prone external relay wiring.
Individually controlled circuits for Starter, Ignition and two separate
Accessory circuits allow the system to install into any vehicle. One ACC
circuit switches OFF during starter crank (to minimize current draw
from components like A/C) and another that stays ON for components such
as computers.
Programmable Starter Delay For
vehicles requiring time for fuel to pressurize on other systems to warm
up before the engine cranks. The PBS II provides a programmable Start
Delay circuit. It allows you to select a delay from the time you press
the start button until your starter cranks of up to 7 Seconds.
Built in MSD Filtering Advanced
filtering circuitry removes noise and electronic spikes associated with
many high performance ignitions, saving money an time by eliminating
the need to buy separate ignition filters.
Full Ignition Switch Functionality
Using
brake pedal controlled switching the system fully emulates the
functions of a traditional key switch. Want to operate accessories
without starting your engine? Just use the Brake to select between
different Ignition modes: “Accessory Only Mode” ( Radio ) “Accessory + Ignition Mode” ( Heating / Fans / Radio ) *** At any time you can go directly to “Start Mode””
Emergency Bypass Should
you ever lose or damaged your iTag™ the system includes a Emergency
Backup PIN# Card that will allow you to start your vehicle in a
emergency. A 2GO KEYLESS™ exclusive feature!
|
|
|
|
|
|
|
|
|
|
|
|
|
Features
- Onboard 60A relays eliminate unsightly and failure prone external relay wiring
- Dual Mode RFID Transmitters provide both Manual & Automatic operation
- Emergency Bypass Card assures starting even if you lose your RFID Transmitter
- Internal MSD filtering circuitry
- A single ITag can be programmed to operate an unlimited number of vehicles
- Proudly made in the USA
|
|
|
|
|
|
Other great products you might need |
|
|
|