You are here:Home > Model Year > 1974
Sort By:
Page of 90
1970-1981 QA1 Pro Coil Single Adjustable Front Coil-Over Shock Only
1970-1981 QA1 Shock, Front Single Adjustable Coil-Over Pro Coil Shock Only
Our Price: $194.95

For your 70-81 model, QA1 offers its Pro Coil single adjustable shock for the daily driver. Compression and rebound adjustment is made easy with one easy-to-reach knob for simultaneous adjustment. With 18 valving options, you’re able to fine tune your suspension for the ride you’re looking for.  Shock is sold individually and without spring.

PART NUMBER: SUS-1117BH
1970-1981 QA1 Stocker Star Drag "R" Series Single Adjustable Front Shock
1970-1981 QA1 Shock, Front Single Adjustable Stocker Star "R" Series
Our Price: $169.95

QA1's Drag "R" Series Stocker Star shock absorbers are designed with drag racing in mind.  With 18 valving options for rebound and a firm compression, you can't go wrong.  Sold each.

PART NUMBER: SUS-1112C
"383" Fender Emblem
Our Price: $19.95

"383" fender emblem for all models.  Sold each.

Part Number: EMB-71
"396" Fender Emblems
Our Price: $26.95

"396" fender emblems for all models.  Excellent quality!  Sold as a matched pair.

Part Number: EMB-90
"427" Fender Emblem
Our Price: $24.95

"427" fender emblem for all models.  Sold each.

Part Number: EMB-72
"454" Custom Emblems
"454" Custom Emblems
Our Price: $59.95

"454" emblems in red.  Will work for all model years.  Sold as a pair.  Studs on the back are designed for 69 fender location, but you can mount anywhere you like.

Part Number: EMB-156
"502" Engine Size Custom Emblems in Red
Our Price: $59.95

New custom "502" emblems in red.  These will look great on your fender or anywhere you like.  Sold in a matched pair.

Part Number: EMB-157
"Easy On" Vinyl or Decal Application Gel Solution
Our Price: $17.95

Easy On is a water-soluble gel designed to temporarily suspend the tack of pressure sensitive vinyl film adhesive and minimize the appearance of air bubbles during installation.  Easy On should be used when applying graphics in extreme heat (above 90F), installing graphics that require exact positioning, or when applying large, hard-to-handle graphics.  Unlike soap and water, no filmy residue remains after the solution dries.  Sold by the pint.

Part Number: PAI-39
"Echoes of Norwood: General Motors Automobile Production During The Twentieth Century" Book by Phillip Borris
"Echoes of Norwood: General Motors Automobile Production During The Twentieth Century" Book by Phillip Borris
Our Price: $39.95

Echoes of Norwood.  Copyright (c) 2013 by Phillip Borris.  The book that goes inside a General Motors Corporation Automotive Assembly Plant, all the way to the factory floor.  Here is the story of the men and women of the Norwood Assembly Plant, where most all 67 - 87 firebirds were produced.  Profiles all the way from the first car produced in 1923 to the 8 millionth and the last car off the line in 1987.  From the "B" body to the "F" car in never before revealed photographs, production data, and personal recollections, all providing a rare glimpse into the inner workings of the automotive industry during the halcyon era of domestic automotive production.

Part Number: LIT-119
"GR-RRR!" License plate
Our Price: $6.95

"GR-RRR!" license plate.

Part Number: GIF-170D
"Loud Pipes Save Lives" License Plate
Our Price: $6.95

"Loud Pipes Save Lives" license plate.

Part Number: GIF-170A
"Metal Mask" Single Component Polyurethane Paint Coating - Bare Metal Gray Finish, 1 Pint
Our Price: $19.95

Metal Mask is a single component polyurethane coating that makes any metal surface look exactly like new bare metal.

Metal Mask is non-porous and will not crack, chip, or peel when properly applied. It has great scratch and abrasion resistance and its not sensitive to UV light. Follow the directions carefully and you will be rewarded with the finest protective coating for metal available anywhere!

Uses include undercarriage components, gas tanks, steering components, hood latches, hinges, and springs.

PART NUMBER: PAI-41
"Metal Mask" Single Component Polyurethane Paint Coating - Bare Metal Gray Finish, 1 Quart
Our Price: $39.95

Metal Mask is a single component polyurethane coating that makes any metal surface look exactly like new bare metal.

Metal Mask is non-porous and will not crack, chip, or peel when properly applied. It has great scratch and abrasion resistance and its not sensitive to UV light. Follow the directions carefully and you will be rewarded with the finest protective coating for metal available anywhere!

Uses include undercarriage components, gas tanks, steering components, hood latches, hinges, and springs.

PART NUMBER: PAI-40
1/4" Vapor Hose Clamp - Correct Red
Our Price: $0.99

1/4" diameter vapor hose clamp in correct red.

Part Number: FUE-56
1156 Ultra Bright LED Back Up Light Bulb ( White )
1156 Ultra Bright LED Back Up Light Bulb ( White )
Our Price: $19.95

This new LED bulb has 14 LEDs with 3 chips per bulb.  Super Brightness: The luminance is 2 to 3 times stronger than traditional LED bulb.  Replaces any standard 1156 bulb.  This bulb will replace the standard backup bulbs.  Sold each, order yours today!!  

Single Filament Bulb

PART NUMBER: LIG-999
1157 Ultra Bright  LED Light Bulb
1157 Ultra Bright LED Light Bulb ( Amber )
Our Price: $19.95

This new LED bulb has 14 LEDs with 3 chips per bulb.  Super Brightness: The luminance is 2 to 3 times stronger than traditional LED bulb.  Replaces any standard 1157A bulb.  This bulb will replace the stop and turn tail light bulbs and the front park light / turn signal bulbs.  Sold each, order yours today!!  

Dual Filament Bulb

PART NUMBER: LIG-901
1157 Ultra Bright  LED Light Bulb
1157 Ultra Bright LED Light Bulb ( White )
Our Price: $19.95

This new LED bulb has 14 LEDs with 3 chips per bulb.  Super Brightness: The luminance is 2 to 3 times stronger than traditional LED bulb.  Replaces any standard 1157 bulb.  This bulb will replace the stop and turn tail light bulbs and the front park light / turn signal bulbs.  Sold each, order yours today!!  

Dual Filament Bulb

PART NUMBER: LIG-900
14 Inch Honeycomb Wheel Rim
14 Inch Honeycomb Wheel Rim
Please call for availability

Rare original GM honeycomb wheel for your bird. Correct 14 inch diameter and 7 inch width, just like factory. This honey comb design looks great on any model you choose. Currently available as a used GM item only. The one you will receive will look similar to the one pictured, above average with no major issues. Sold as each.

Part Number: WHE-2016
14 Inch Honeycomb Wheel Trim Ring, Each
14 Inch Honeycomb Wheel Trim Ring, Each
Our Price: $64.95

New correct style trim ring for your bird. Exact fit for all 14 inch diameter honey comb wheel rims. Factory designed lip shape and fit. Sold as each.

Please Note: There are dimples or imperfections where the stainless rolls over during manufacturing. They look great from 10 feet away but wavey up close. A strong 7 on a 1 to 10 scale.

Part Number: WHE-2010
14 Inch Honeycomb Wheel Trim Rings, Set of Four
14 Inch Honeycomb Wheel Trim Rings, Set of Four
Our Price: $239.95

New correct style trim rings for your Firebird. Exact fit for all 14 inch diameter honey comb wheel rims. Factory designed lip shape and fit. Sold as a complete set of 4.

Please Note: There are dimples or imperfections where the stainless rolls over during manufacturing. They look great from 10 feet away but wavey up close. A strong 7 on a 1 to 10 scale.

Part Number: WHE-2011
14 X 6 Rally Wheel Trim Rings, Set of 4
Our Price: $89.95

New set of four 14 x 6 Rally wheel trim rings. Inner clips go all the way around the ring. Outer lip is rounded and the valve stem opening is "U" shaped. Replaces GM part number 475019. Correct wheel application shown is for reference only.

Part Number: WHE-10A
14 X 7 Rally Wheel Trim Ring, Each
14 X 7 Rally Wheel Trim Ring, Each
Our Price: $29.95

New correct size trim ring for your Pontiac rally wheel. Exact stainless steel finish and fit. Works great for all 14" x 7" rims. Replaces GM part number 9796919. Picture of the correct wheel these fit is for reference only.

Part Number: WHE-20
14 X 7 Rally Wheel Trim Rings, Set of Four
14 X 7 Rally Wheel Trim Rings, Set of Four
Our Price: $89.95

14 X 7 Rally Wheel Trim Rings, Set of Four

New correct size trim rings for your Pontiac rally wheel. Exact stainless steel finish and fit. Works great for all 14" x 7" rims. Replaces GM part number 9796919. Picture of the correct wheel these fit is for reference only. Sold as a set of four.

Part Number: WHE-21
14 x 7 Stock Steelie COPO Style Dog Dish Wheel, Rim Only
14 x 7 Stock Steelie COPO Style Dog Dish Wheel, Rim Only
Our Price: $113.95

14 x 7 Stock Steelie COPO Style Dog Dish Wheel, Rim Only

14X7 Stock Steelie COPO style dog dish wheel is now available for your Firebird. This steel wheel is 14 X 7 and sold individually.This O.E. Style Chevy wheel in primer is a versatile wheel that fits 10 1/8" outside knob caps. Perfect wheel for the COPO or SLEEPER look. This will was found on the COPO Super Cars with the GM factory dog dish hub caps. These steel wheels are an easy way to upgrade the look of your car or truck. Paint them the exact color you want, and with so many different caps to choose from, you can easily customize these wheels to your own unique style. Proudly Made in the USA!

Pictured painted with the Dog Dish Poverty Hub Cap for reference only. Cap, Paint, and Tire are sold separately.


PART NUMBER: WHE-754
14 x 7 Wheel Trim Rings Set, Deep Style NOS GM
14 x 7 Wheel Trim Rings Set, Deep Style NOS GM
Our Price: $1,000.00

Original GM NOS correct size trim rings for your Firebird or Trans Am. Exact stainless steel shine and design. 14" x 7" deep trim rings in a set of 4. This number supersedes the old school 9796919 part number. Three have never even been opened! These are the real deal!

PART NUMBER: 22519452
14" Rally Wheel with Goodyear Wide Tread Whitewall
14" Rally Wheel with Goodyear Wide Tread Skinny Whitewall
Our Price: $250.00

Extra cool wheel and tire combo for your classic. Rim is 14 inch and in great shape. Tire is a real vintage Goodyear speedway wide tread thin ( pin ) white wall. Just came from a 20 plus year old parts collection. Rim code is " JA ".  Tire size is G70-14 and it has plenty tread with no major issues. Perfect spare for your ride.

Part Number : WHE-2300

14x6   Rally II       5 x 4-3/4"   HL " JA " JK JT KT KU 525708
67     Firebird w/ Disc Brakes
70     Firebird
76     Firebird
69     Grand Prix
73-74  Le Mans
77-79  Phoenix
67     Tempest
68     Tempest w/ Disc Brakes
69-72  Tempest
15 Inch Honeycomb Wheel Rim - Original GM Used
15 Inch Honeycomb Wheel Rim - Original GM Used
Please call for availability

Rare original GM honeycomb wheel for your bird.  Correct 15 inch diameter and 7 inch width, just like factory.  This honey comb design was a factory option on all 71 - 76 firebirds and trans ams, but looks great on any model you choose.  Currently available as a used GM item only.  The one you will receive will look similar to the one pictured, above average with no major issues.  Sold as each.

Part Number: WHE-2017
15 X 6 Wheel Trim Ring, Rally Wheel Style, Each
15 X 6 Wheel Trim Ring, Rally Wheel Style, Each
Our Price: $29.95

New 15 x 6 Rally wheel trim ring. Inner clips go all the way around the ring. Outer lip is rounded and valve stem opening is "U" shaped. Correct rally wheel picture shown is for reference only. Sold as each.

Part Number: WHE-100
15 x 7 Rally Wheel Trim Rings, Stepped Edge, Set of 4
15 x 7 Rally Wheel Trim Rings, Stainless Steel - Set of 4
Our Price: $89.95

15 x 7 Rally Wheel Trim Rings, Stepped Edge, Set of 4

New 15 x 7 Rally wheel trim ring for your Firebird. Features the correct stepped edge design, very very close to what was installed on your 15 x 7 inch rally wheels from the factory. Made from premium quality stainless steel. Replaces original GM part number 9796696. Correct wheel application shown is for reference only.

Please look at the pictures shown and make sure this is the version you need.

Part Number: WHE-15
15 x 7 Stock Steelie COPO Style Dog Dish Wheel, Rim Only
15 x 7 Stock Steelie COPO Style Dog Dish Wheel, Rim Only
Our Price: $113.95

15 x 7 Stock Steelie COPO Style Dog Dish Wheel, Rim Only

15X7 Stock Steelie COPO style dog dish wheel is now available for your Firebird. This steel wheel is 15 X 7 and sold individually.This O.E. Style Chevy wheel in primer is a versatile wheel that fits 10 1/8" outside knob caps. Perfect wheel for the COPO or SLEEPER look. This will was found on the COPO Super Cars with the GM factory dog dish hub caps. These steel wheels are an easy way to upgrade the look of your car or truck. Paint them the exact color you want, and with so many different caps to choose from, you can easily customize these wheels to your own unique style. Proudly Made in the USA!

Pictured painted with the Dog Dish Poverty Hub Cap for reference only. Cap, Paint, and Tire are sold separately.


PART NUMBER: WHE-755