You are here:Home > Model Year
Choose a sub category:
1967 1968
1969 1970
1971 1972
1973 1974
1975 1976
1977 1978
1979 1980
1981 82-92
93-02
Sort By:
Page of 304
1970-1981 QA1 Pro Coil Single Adjustable Front Coil-Over Shock Only
1970-1981 QA1 Shock, Front Single Adjustable Coil-Over Pro Coil Shock Only
Our Price: $194.95

For your 70-81 model, QA1 offers its Pro Coil single adjustable shock for the daily driver. Compression and rebound adjustment is made easy with one easy-to-reach knob for simultaneous adjustment. With 18 valving options, you’re able to fine tune your suspension for the ride you’re looking for.  Shock is sold individually and without spring.

PART NUMBER: SUS-1117BH
1970-1981 QA1 Stocker Star Drag "R" Series Single Adjustable Front Shock
1970-1981 QA1 Shock, Front Single Adjustable Stocker Star "R" Series
Our Price: $179.95

QA1's Drag "R" Series Stocker Star shock absorbers are designed with drag racing in mind.  With 18 valving options for rebound and a firm compression, you can't go wrong.  Sold each.

PART NUMBER: SUS-1112C
1982-1992 QA1 Pro Coil Spring Only
1982-1992 QA1 Spring, Pro Coil Spring Only
Our Price: $42.95

Powder coated, chrome appearing 2 ½” I.D. Coil Springs.  Made with the highest quality materials, QA1 springs are strong, consistent and have a long life.  All QA1 springs are lifetime guaranteed to remain within 5% of the original free height under normal operating conditions.  Sold each.

PART NUMBER: SUS-1118C
1982 - 1992 QA1 Pro Coil Double Adjustable Front Coil-Over Struts Kit
1982-1992 QA1 Struts, Front Double Adjustable Coil-Over Pro Coil Kit
Our Price: $909.95

Whether you are looking for nice ride and handling or a firm ride with great cornering for your 82 - 92 model, QA1 has what you need.  The 3rd and 4th Generation F-Body Pro Coil Double Adjustable System allows for independent compression and rebound adjustment, giving you 324 valving options.  With a variety of springs, you are sure to find the ride you're looking for.

Kit Includes:
- (2) QA1 Double Adjustable Struts
- (2) Specially Designed Springs
- All Mounting Hardware

NOTE:  These struts require the use of Camber Plates, part number SUS-1118P.

PART NUMBER: SUS-1118A
1982-2002 QA1 Stocker Star Double Adjustable Rear Shock
1982-2002 QA1 Shock, Rear Double Adjustable Stocker Star
Our Price: $264.95

QA1 offers a double adjustable Stocker Star shock for a variety of applications.  The double adjustable knobs allow you to choose from 324 valving options to find the ride you want for any situation.  Sold each.

PART NUMBER: SUS-1120A
1993-2002 QA1 Pro Coil Double Adjustable Front Shock
1993-2002 QA1 Shock, Front Double Adjustable Coil-Over Pro Coil Shock Only
Our Price: $294.95

Whether you are looking for nice ride and handling or a firm ride with great cornering, the Pro Coil Double Adjustable System allows for independent compression and rebound adjustment, giving you 324 valving options.  Shock sold individually and without spring.

PART NUMBER: SUS-1119AH
1993-2002 QA1 Pro Coil Double Adjustable Front Coil-Over Shocks Kit
1993-2002 QA1 Shocks, Front Double Adjustable Coil-Over Pro Coil Kit
Our Price: $699.95

Whether you are looking for nice ride and handling or a firm ride with great cornering for your 93-02 model, QA1 has what you need.  The 3rd and 4th Generation F-Body Pro Coil Double Adjustable System allows for independent compression and rebound adjustment, giving you 324 valving options.  With a variety of springs, you are sure to find the ride you're looking for.

Kit Includes:
- (2) QA1 Double Adjustable Shocks
- (2) Specially Designed Springs
- All Mounting Hardware

PART NUMBER: SUS-1119A
"383" Fender Emblem
Our Price: $19.95

"383" fender emblem for all models.  Sold each.

Part Number: EMB-71
"396" Fender Emblems
Our Price: $26.95

"396" fender emblems for all models.  Excellent quality!  Sold as a matched pair.

Part Number: EMB-90
"427" Fender Emblem
Our Price: $24.95

"427" fender emblem for all models.  Sold each.

Part Number: EMB-72
"454" Custom Emblems
"454" Custom Emblems
Our Price: $59.95

"454" emblems in red.  Will work for all model years.  Sold as a pair.  Studs on the back are designed for 69 fender location, but you can mount anywhere you like.

Part Number: EMB-156
"502" Engine Size Custom Emblems in Red
Our Price: $59.95

New custom "502" emblems in red.  These will look great on your fender or anywhere you like.  Sold in a matched pair.

Part Number: EMB-157
"Easy On" Vinyl or Decal Application Gel Solution
Our Price: $17.95

Easy On is a water-soluble gel designed to temporarily suspend the tack of pressure sensitive vinyl film adhesive and minimize the appearance of air bubbles during installation.  Easy On should be used when applying graphics in extreme heat (above 90F), installing graphics that require exact positioning, or when applying large, hard-to-handle graphics.  Unlike soap and water, no filmy residue remains after the solution dries.  Sold by the pint.

Part Number: PAI-39
"Echoes of Norwood: General Motors Automobile Production During The Twentieth Century" Book by Phillip Borris
"Echoes of Norwood: General Motors Automobile Production During The Twentieth Century" Book by Phillip Borris
Our Price: $39.95

Echoes of Norwood.  Copyright (c) 2013 by Phillip Borris.  The book that goes inside a General Motors Corporation Automotive Assembly Plant, all the way to the factory floor.  Here is the story of the men and women of the Norwood Assembly Plant, where most all 67 - 87 firebirds were produced.  Profiles all the way from the first car produced in 1923 to the 8 millionth and the last car off the line in 1987.  From the "B" body to the "F" car in never before revealed photographs, production data, and personal recollections, all providing a rare glimpse into the inner workings of the automotive industry during the halcyon era of domestic automotive production.

Part Number: LIT-119
"Loud Pipes Save Lives" License Plate
Our Price: $6.95

"Loud Pipes Save Lives" license plate.

Part Number: GIF-170A
"Metal Mask" Single Component Polyurethane Paint Coating - Bare Metal Gray Finish, 1 Pint
Our Price: $19.95

Metal Mask is a single component polyurethane coating that makes any metal surface look exactly like new bare metal.

Metal Mask is non-porous and will not crack, chip, or peel when properly applied. It has great scratch and abrasion resistance and its not sensitive to UV light. Follow the directions carefully and you will be rewarded with the finest protective coating for metal available anywhere!

Uses include undercarriage components, gas tanks, steering components, hood latches, hinges, and springs.

PART NUMBER: PAI-41
"Metal Mask" Single Component Polyurethane Paint Coating - Bare Metal Gray Finish, 1 Quart
Our Price: $39.95

Metal Mask is a single component polyurethane coating that makes any metal surface look exactly like new bare metal.

Metal Mask is non-porous and will not crack, chip, or peel when properly applied. It has great scratch and abrasion resistance and its not sensitive to UV light. Follow the directions carefully and you will be rewarded with the finest protective coating for metal available anywhere!

Uses include undercarriage components, gas tanks, steering components, hood latches, hinges, and springs.

PART NUMBER: PAI-40
1/4" Vapor Hose Clamp - Correct Red
Our Price: $0.99

1/4" diameter vapor hose clamp in correct red.

Part Number: FUE-56
1156 Ultra Bright LED Back Up Light Bulb ( White )
1156 Ultra Bright LED Back Up Light Bulb ( White )
Our Price: $19.95

This new LED bulb has 14 LEDs with 3 chips per bulb.  Super Brightness: The luminance is 2 to 3 times stronger than traditional LED bulb.  Replaces any standard 1156 bulb.  This bulb will replace the standard backup bulbs.  Sold each, order yours today!!  

Single Filament Bulb

PART NUMBER: LIG-999
1157 Ultra Bright  LED Light Bulb
1157 Ultra Bright LED Light Bulb ( Amber )
Our Price: $19.95

This new LED bulb has 14 LEDs with 3 chips per bulb.  Super Brightness: The luminance is 2 to 3 times stronger than traditional LED bulb.  Replaces any standard 1157A bulb.  This bulb will replace the stop and turn tail light bulbs and the front park light / turn signal bulbs.  Sold each, order yours today!!  

Dual Filament Bulb

PART NUMBER: LIG-901
1157 Ultra Bright  LED Light Bulb
1157 Ultra Bright LED Light Bulb ( White )
Our Price: $19.95

This new LED bulb has 14 LEDs with 3 chips per bulb.  Super Brightness: The luminance is 2 to 3 times stronger than traditional LED bulb.  Replaces any standard 1157 bulb.  This bulb will replace the stop and turn tail light bulbs and the front park light / turn signal bulbs.  Sold each, order yours today!!  

Dual Filament Bulb

PART NUMBER: LIG-900
12 Bolt Standard Open and Positraction Rear End Differential Cross Pin Shaft
12 Bolt Standard Open and Positraction Rear End Differential Cross Pin Shaft
Our Price: $17.95

Standard open and posi traction cross pin shaft for GM 12T, 12P, and 55T.  Fits all Firebird 12 bolt rear ends.

PART NUMBER: CLU-598
14 Inch Honeycomb Wheel Rim
14 Inch Honeycomb Wheel Rim
Please call for availability

Rare original GM honeycomb wheel for your bird. Correct 14 inch diameter and 7 inch width, just like factory. This honey comb design looks great on any model you choose. Currently available as a used GM item only. The one you will receive will look similar to the one pictured, above average with no major issues. Sold as each.

Part Number: WHE-2016
14 Inch Honeycomb Wheel Trim Ring, Each
14 Inch Honeycomb Wheel Trim Ring, Each
Our Price: $64.95

New correct style trim ring for your bird. Exact fit for all 14 inch diameter honey comb wheel rims. Factory designed lip shape and fit. Sold as each.

Please Note: There are dimples or imperfections where the stainless rolls over during manufacturing. They look great from 10 feet away but wavey up close. A strong 7 on a 1 to 10 scale.

Part Number: WHE-2010
14 Inch Honeycomb Wheel Trim Rings, Set of Four
14 Inch Honeycomb Wheel Trim Rings, Set of Four
Our Price: $239.95

New correct style trim rings for your Firebird. Exact fit for all 14 inch diameter honey comb wheel rims. Factory designed lip shape and fit. Sold as a complete set of 4.

Please Note: There are dimples or imperfections where the stainless rolls over during manufacturing. They look great from 10 feet away but wavey up close. A strong 7 on a 1 to 10 scale.

Part Number: WHE-2011
14 X 6 Rally Wheel Trim Rings, Set of 4
Our Price: $89.95

New set of four 14 x 6 Rally wheel trim rings. Inner clips go all the way around the ring. Outer lip is rounded and the valve stem opening is "U" shaped. Replaces GM part number 475019. Correct wheel application shown is for reference only.

Part Number: WHE-10A
14 X 7 Rally Wheel Trim Ring, Each
14 X 7 Rally Wheel Trim Ring, Each
Our Price: $29.95

New correct size trim ring for your Pontiac rally wheel. Exact stainless steel finish and fit. Works great for all 14" x 7" rims. Replaces GM part number 9796919. Picture of the correct wheel these fit is for reference only.

Part Number: WHE-20
14 X 7 Rally Wheel Trim Rings, Set of Four
14 X 7 Rally Wheel Trim Rings, Set of Four
Our Price: $89.95

14 X 7 Rally Wheel Trim Rings, Set of Four

New correct size trim rings for your Pontiac rally wheel. Exact stainless steel finish and fit. Works great for all 14" x 7" rims. Replaces GM part number 9796919. Picture of the correct wheel these fit is for reference only. Sold as a set of four.

Part Number: WHE-21
14 x 7 Stock Steelie COPO Style Dog Dish Wheel, Rim Only
14 x 7 Stock Steelie COPO Style Dog Dish Wheel, Rim Only
Our Price: $113.95

14 x 7 Stock Steelie COPO Style Dog Dish Wheel, Rim Only

14X7 Stock Steelie COPO style dog dish wheel is now available for your Firebird. This steel wheel is 14 X 7 and sold individually.This O.E. Style Chevy wheel in primer is a versatile wheel that fits 10 1/8" outside knob caps. Perfect wheel for the COPO or SLEEPER look. This will was found on the COPO Super Cars with the GM factory dog dish hub caps. These steel wheels are an easy way to upgrade the look of your car or truck. Paint them the exact color you want, and with so many different caps to choose from, you can easily customize these wheels to your own unique style. Proudly Made in the USA!

Pictured painted with the Dog Dish Poverty Hub Cap for reference only. Cap, Paint, and Tire are sold separately.


PART NUMBER: WHE-754
14 x 7 Wheel Trim Rings Set, Deep Style NOS GM
14 x 7 Wheel Trim Rings Set, Deep Style NOS GM
Our Price: $1,000.00

Original GM NOS correct size trim rings for your Firebird or Trans Am. Exact stainless steel shine and design. 14" x 7" deep trim rings in a set of 4. This number supersedes the old school 9796919 part number. Three have never even been opened! These are the real deal!

PART NUMBER: 22519452