You are here:Home > Sheet Metal
Choose a sub category:
Battery Tray & Parts Body Assembly Hardware
Body Bolt Kits Body Plugs
Cowl Firewall Panels Doors
Dynocorn Classic Bodies Fenders
Floor Pans Header & Valance Panels
Hoods Quarter Panels
Radiator supports Rear Wheel Wells
Rocker Panels Roof Skins
Tail Panel Trunk Floors
Trunk Lids
Sort By:
Page of 30
1967 Firebird Under Dash Main Wiring Harness Fuse Box to Firewall Screws
1967 Under Dash Main Wiring Harness Screws, Fuse Box to Firewall
Our Price: $2.95

Fuse box screws for 67 models.  Includes coated wax sealant to water proof seal at firewall.  Sold as a pair.

Part Number: WIR-111
1967-1968 Firebird Trunk Floor Panel, Larger Version 45 Inches x 38 Inches
1967 - 1968 Camaro Trunk Floor Panel, Larger Version 45 Inches x 38 Inches
Our Price: $84.95

1967-1968 Firebird Trunk Floor Panel, Larger Version 45 Inches x 38 Inches

Correct sheet metal trunk floor repair panel for your 67 or 68 Firebird. Measures 45 inches left to right and 38 inches up and down. Too big to ship UPS or FedEx so it must ship truck freight.

PART NUMBER: SHE-326
1967 - 1968 Fender Left Hand - Original GM NOS - 9793817
Please call for availability

Rare original GM fender for your bird. Exact fit for all 67 - 68 models. This one is for the left hand, drivers side. Includes the lower front fender extension. Vintage blue and black GM sticker with part number 9793817 . Comes with an original GM NOS 67 fender extension. If you are a 68 model we will substitute with a reproduction style 68 fender extension.

PART NUMBER: SHE-2014

1967 - 1968 Fender Panel Patch with Brace, LH
Our Price: $39.95

1967 - 1968 Firebird fender patch panel for left hand driver side, includes inner reinforcement brace. Fits behind the front wheel. Measures just over 11" tall and 16" wide across the top.

PART NUMBER: SHE-914
1967 - 1968 Fender Panel Patch with Brace, RH
Our Price: $39.95

1967 - 1968 Firebird fender patch panel for right hand passengers side, includes inner reinforcement brace. Fits behind the front wheel. Measures just over 11" tall and 16" wide across the top.

PART NUMBER: SHE-915
1967 - 1968 Firebird Fender - Left Hand, USA Made
1967 - 1968 Firebird Fender - Left Hand, USA Made
Our Price: $1,299.95
Sale Price: $1,199.95
You save $100.00!

Correct front fender for your 1967 - 1968 Firebird. Exact fit for all 67 - 68 models. This one is for the left hand, drivers side. Our new front fender is produced with high grade, factory gauge steel finished in matte black EDP coating ready to prep and paint. USA made with GM tooling! Thats right, this front fender is manufactured in the USA using GM tooling! Ready to prep and paint to your desired color. The fit is perfect every time! Be sure to use alignment shims when installing new fenders. Front fenders are too large for normal delivery and require shipment via truck freight. Note: Fender extensions are sold separately.

Note: Fender extensions are sold separately.

Part Number: SHE-2517
1967 - 1968 Firebird Fender - Right Hand , USA Made
1967 - 1968 Firebird Fender - Right Hand , USA Made
Our Price: $1,299.95
Sale Price: $1,199.95
You save $100.00!
Out of Stock

Currently Unavailable

NEW RH Passenger Side 1967-1968 Firebird front fender is produced with high grade, factory gauge steel finished in matte black EDP coating ready to prep and paint. Lower front fender extension is sold seperately. US made with GM tooling. These front fenders are manufactured in the USA using GM tooling and ready to prep and paint to your desired color. The fit is perfect every time! Be sure to use alignment shims when installing new fenders. Front fenders are too large for normal delivery and require shipment via truck freight.

Part Number: SHE-2518
1967 - 1968 Firebird Fender with Lower Extension, Left Hand
1967 - 1968 Firebird Fender with Lower Extension, Left Hand
Our Price: $279.95

New tooling front fender for your bird. Exact fit for all 67 - 68 Firebird models. Correct fit for the left hand, drivers side. This fender is produced with high grade, factory gauge steel finished in matte black EDP coating. Ready to prep and paint. Forward lower front fender extension is included with this fender. Please select your model year, 1967 or 1968, from the drop-down menu.

NOTE: Shipped truck freight.

Part Number: SHE-2519
1967 - 1968 Firebird Fender with Lower Extension, Right Hand
1967 - 1968 Firebird Fender with Lower Extension, Right Hand
Our Price: $279.95

1967 - 1968 Firebird Fender with Lower Extension, Right Hand

New tooling front fender for your bird. Exact fit for all 67 - 68 Firebird models. Correct fit for the right hand, passenger side. This fender is produced with high grade, factory gauge steel finished in matte black EDP coating. Ready to prep and paint. Forward lower front fender extension is included with this fender. Please select your model year, 1967 or 1968, from the drop-down menu. NOTE: Shipped truck freight.

Part Number: SHE-2520
1967 - 1968 Firebird Floor, Trunk, and Wheel House Rubber Body Plug Set
1967 - 1968 Firebird Floor, Trunk, and Wheel House Rubber Body Plugs Set
Our Price: $18.95

New round rubber body plugs set for your bird.  Exact fit for all 67 - 68 models.  These small round plugs are found in your floor pans, trunk pans, and wheel house area.  Includes all 12 pieces.

PART NUMBER: SHE-74
1967 - 1968 Firebird Front Bucket Seat Frame Mounting Platform Floor Support Bracket, LH
1967 - 1968 Firebird Front Bucket Seat Frame Mounting Platform Floor Support Bracket, LH
Our Price: $59.95
Sale Price: $54.95
You save $5.00!

1967 - 1968 Firebird Front Bucket Seat Frame Mounting Platform Floor Support Bracket, LH

Front bucket seat frame mounting platform for left hand driver side on 1967 - 1968 Firebird models. Die stamped floor panel for mounting bucket seat includes correct nuts welded to panel for mounting to the seat tracks. This is the correct 67 - 68 Firebird seat platform with 1 sets of track mounting holes.

~~This LH Seat Frame Support Panel fits both coupe and convertible models

PART NUMBER: SHE-249
1967 - 1968 Firebird Front Bucket Seat Frame Mounting Platform Floor Support Bracket, RH
1967 - 1968 Firebird Front Bucket Seat Frame Mounting Platform Floor Support Bracket, RH
Our Price: $59.95
Sale Price: $54.95
You save $5.00!

1967 - 1968 Firebird Front Bucket Seat Frame Mounting Platform Floor Support Bracket, RH

Front bucket seat frame mounting platform for right hand passenger side on 1967 - 1968 Firebird models. Die stamped floor panel for mounting bucket seat includes correct nuts welded to panel for mounting to the seat tracks. This is the correct 67 - 68 Firebird seat platform with 1 sets of track mounting holes.

~~This RH Seat Frame Support Panel fits both coupe and convertible models

PART NUMBER: SHE-250
1967 - 1968 Front Inner Fender, Left Hand, Correct Firebird Style
1967 - 1968 Firebird Front Inner Fender Left Hand, Correct Style
Our Price: $119.95

1967 - 1968 Firebird Front Inner Fender Left Hand, Correct Style

New original style front inner fender for your bird. Exact fit for all 67 and 68 Firebird models. This one is for the Left Hand, drivers side. This is a true Firebird correct style inner fender with notch for the inner bumper bracket to fit properly. If you want the real deal,, here it is!!

Part Number: SHE-2154
1967 - 1968 Firebird Front Lower Valance Baffle Extension Closeout Panel
1967 - 1968 Firebird Front Lower Valance Baffle Extension Closeout Panel
Our Price: $159.95
Sale Price: $139.95
You save $20.00!

1967 - 1968 Firebird Front Lower Valance Baffle Extension Closeout Panel

New front lower valance baffle extension closeout panel for your 67 - 68 Firebird. This is a technically correct lower closeout panel that can be installed on your bird. Made to replace the original 1967 - 1968 baffle which is used to close off the bottom area between the front valance panel and the radiator core support. This item also helps eliminate overheating, pushing air up into the radiator section for better cooling. This is a reproduction of the original filler panel and may require modification for installation. Made in the USA and produced in fiberglass. Originally found Heavy Duty Cooling models like 400 and Air Conditioning models. This part also acts as a lower spoiler.

Part Number: SPO-2022
1967 - 1968 Firebird Hood Latch Assembly, GM Original Used
1967 - 1968 Firebird Hood Latch Assembly, GM Original Used
Please call for availability

Real GM hood latch release mechanism assembly for your bird. Exact fit for all 67 and 68 Firebird models. This is an original GM used assembly. The one you will receive will look similar to the one pictured, above average with no major damage. These are hard to find in any condition. We will make sure it functions as it should.

PART NUMBER: SHE-2616U
1967 - 1968 Firebird Hood Release Latch Mechanism Assembly with Handle
1967 - 1968 Firebird Hood Release Latch Mechanism Assembly with Handle
Our Price: $109.95
Sale Price: $99.95
You save $10.00!

1967 - 1968 Firebird Hood Release Latch Mechanism Assembly with Handle

Correct hood latch release mechanism assembly for your 67 or 68 Firebird. Works great for all 1967 and 1968 hoods. Includes latch mechanism with attached handle. Look no more for this ultra hard to find part, order yours today! Made in the USA!

NOTE: Not for use on original 1967 hoods. Fits all 68 Hoods and 67-68 models with Reproduction Hoods

Part Number: SHE-2614
1967 - 1968 Firebird Inner Lower Cowl Panel, 67 All Models and 68 with Air Conditioning
1967 - 1968 Firebird Inner Lower Cowl Panel, 67 All Models and 68 with Air Conditioning
Our Price: $149.95

New Inner Lower Cowl Panel for your 67 - 68 Firebird. If you only need the lower portion of the cowl section, this part can save you some money. Exact fit for all 1967 models and all 1968 with air conditioning. Manufactured to factory specifications featuring correct contours, pre-cut openings.

Features a black electrophoretically deposited coating (EDP, or E-coat) for superior long-term corrosion protection and is ready to be prepped, primed and painted without stripping.

Important: This panel requires welding for installation. Professional installation is recommended to ensure proper fit.

PART NUMBER: SHE-427
1967 - 1968 Firebird Lower Cowl Panel, without Air Conditioning
Our Price: $139.95

1967 - 1968 Firebird Lower Cowl Panel for cars without AC. If you only need the lower portion of the cowl section, this part can save you some money on that restoration.

PART NUMBER: SHE-426
1967 - 1968 Firebird Quarter Panel Bumper Bolt Reinforcement Bracket Brace, LH
1967 - 1968 Firebird Quarter Panel Bumper Bolt Reinforcement Bracket Brace, LH
Our Price: $5.95

1967 - 1968 Firebird Quarter Panel Bumper Bolt Reinforcement Bracket, LH

New inner rear quarter panel small weld on bracket. This bracket welds to the inside of the rear quater panel where the bumber bolt goes through. Reinforcement for the rear bumper bolt, a must have. Fits LH Driver Side.

Fits 67 - 68 Firebird All Models

PART NUMBER: SHE-2670
1967 - 1968 Firebird Quarter Panel Bumper Bolt Reinforcement Bracket Brace, RH
1967 - 1968 Firebird Quarter Panel Bumper Bolt Reinforcement Bracket Brace, RH
Our Price: $5.95

1967 - 1968 Firebird Quarter Panel Bumper Bolt Reinforcement Bracket Brace, RH

New inner rear quarter panel small weld on bracket. This bracket welds to the inside of the rear quater panel where the bumber bolt goes through. Reinforcement for the rear bumper bolt, a must have. Fits RH Passenger Side.

Fits 67 - 68 Firebird All Models

PART NUMBER: SHE-2670A
1967 - 1968 Firebird Radiator Core Support, NEW Original Style
1967 - 1968 Firebird Radiator Core Support, NEW Original Style
Our Price: $154.95
Sale Price: $149.95
You save $5.00!

1967-1968 Firebird Radiator Core Support, NEW Original Style

New Original Design Radiator Core Support for all 6 and 8 cylinder 1967 or 1968 Firebird models. Stamped from new tooling, each support features correct gauge sheet metal, OE style contours and correctly located pre-punched holes. This new original style rad support is specifically designed for 67 - 68 Firebird models.

PART NUMBER: SHE-8B
1967 - 1968 Firebird Radiator Upper Baffle Support Top Cover Filler Panels, Steel OE Style
1967 - 1968 Firebird Radiator Upper Baffle Support Top Cover Filler Panels, Steel OE Style
Our Price: $109.95
Sale Price: $99.95
You save $10.00!

1967 - 1968 Firebird Radiator Upper Baffle Support Top Cover Filler Panels, Steel OE Style

New correct design steel radiator to header panel filler plate kit. Exact fit for all 1967 - 1968 first generation Firebirds models. Includes mounting hardware and rubber bumpers. Factory installed on all air conditioned or 400 engine equipped models. Can be added to any 67 - 68 model for a clean look under your hood. These are a great part to help keep your engine running cool, keeps air in front of radiator!

*These filler plates come raw, painted black for reference only.

~~INCLUDES EXACT RUBBER BUMPER STOPS AND MOUNTING HARDWARE

Part Number: RAD-2050
1967 - 1968 Firebird Rear License Plate Tag Retainer Bracket
Our Price: $14.95

New correct design rear license plate bracket for your bird.  Exact fit for all 1967 - 1968 models.  Correct shape, size, and fit!

Part Number: LIC-2011
1967 - 1968 Firebird Tail Panel Trunk Lock Latch Brace Support
1967 - 1968 Firebird Tail Panel Trunk Lock Latch Brace Support
Our Price: $39.95

New tail panel trunk lock latch inner brace for your Firebird. Exact fit for all 67 and 68 models. Features the metal gas fuel neck shield with screw.

PART NUMBER: TRU-50
1967 - 1968 Firebird Trunk Floor Gas Fuel Tank Brace Bracket, Each
Our Price: $49.95

New correct design trunk floor gas fuel tank brace.  This brace reinforces and supports your fuel tank straps.  Exact fit for all 67-68 models and will work for left or right hand sides.  Your fuel tank straps mount into these.  Two required per car, sold each.

PART NUMBER: SHE-351
1967 - 1968 Firebird Trunk Floor Panel, 45 Inches x 32 Inches UPSable
1967 - 1968 Firebird Trunk Floor Panel, 45 Inches x 32 Inches UPSable
Our Price: $74.95

1967 - 1968 Firebird Trunk Floor Panel, 45 Inches x 32 Inches UPSable

Correct sheet metal trunk floor repair pan for your Firebird. Exact fit for all 67 - 68 models. Measures 44” left to right and 35” up and down. This one can ship UPS no problem.

PART NUMBER: SHE-330
1967 - 1968 Standard Front End Fastener Set
1967 - 1968 Front End Bolt Fastener Set
Our Price: $49.95

New front end bolt kit for your bird.  Exact fit for all 67 - 68 firebirds.  Correct black indented head pinch point bolts, cage nuts, fender washers, hood, valance panel, fenders, inner fenders, and some grille hardware.  Stop looking for your bolts, here they are!

Part Number: SHE-3
1967 - 1968 Firebird Front End Bolt Fastener Set, Stainless Steel
1967 - 1968 Front End Bolt Fastener Set, Stainless Steel
Our Price: $129.95

New correct style Stainless Steel front end bolt set for your Firebird. This bolt kit is made of 18-8 stainless and black oxide coated to resemble an original look. Exact fit for all 67 - 68 Firebird models. Includes oe type black indented head pinch point bolts, cage nuts, fender washers, hood, header panel, valance panel, fenders, inner fenders and grille hardware. This kit has 165 pieces. Stop looking for your bolts, here they are.

PART NUMBER: SHE-3A
1967 - 1968 Front Inner Fender Bolts Set with J-Nuts and Shims
1967 - 1968 Front Inner Fender Bolts Set with J-Nuts and Shims
Our Price: $22.95

New bolt & " J " nut set to mount both your left and right front inner fenders. Fits all 67 - 68 Firebird models. This is also available in complete front end bolt kit if your looking for some more pieces. *Now Includes Shims!

PART NUMBER: SHE-645
1967 - 1968 Front Inner Fender, Left Hand Side - CAMARO STYLE
1967 - 1968 Front Inner Fender, Left Hand Side - CAMARO STYLE
Our Price: $89.95

New front inner fender for your 67 - 68 Firebird. This one is for the left hand , drivers side on all models. Note: This is truly a camaro style inner fender and will require some trimming in the front center around your inner bumper bracket for proper fitment. Not sure,,, dont hesitate to call the shop at 1.859.408.2005.

Part Number: SHE-54