You are here:Home > Radiator - Fan Shroud
Choose a sub category:
COLD-CASE Aluminum Radiators Bypass Hose
Cooling System Cooling System Clamps
Engine Fan Radiator Hoses
Radiators Temperature Sender
Thermostat Water Pumps
Sort By:
Page of 6
1967 - 1968 Firebird Radiator Upper Baffle Support Top Cover Filler Panels, Steel OE Style
1967 - 1968 Firebird Radiator Upper Baffle Support Top Cover Filler Panels, Steel OE Style
Our Price: $109.95
Sale Price: $99.95
You save $10.00!

1967 - 1968 Firebird Radiator Upper Baffle Support Top Cover Filler Panels, Steel OE Style

New correct design steel radiator to header panel filler plate kit. Exact fit for all 1967 - 1968 first generation Firebirds models. Includes mounting hardware and rubber bumpers. Factory installed on all air conditioned or 400 engine equipped models. Can be added to any 67 - 68 model for a clean look under your hood. These are a great part to help keep your engine running cool, keeps air in front of radiator!

*These filler plates come raw, painted black for reference only.

~~INCLUDES EXACT RUBBER BUMPER STOPS AND MOUNTING HARDWARE

Part Number: RAD-2050
1967 - 1968 Firebird Replacement Water Pump Mounting Bolt and Stud Hardware Kit
1967 - 1968 Firebird Replacement Water Pump Mounting Bolt and Stud Hardware Kit
Our Price: $19.95
Sale Price: $18.95
You save $1.00!

Replacement design bolt and stud kit to mount your water pump on your 1967 - 1968 Pontiac engine. Great fit for all 67 - 68 Firebirds with Pontiac V8 engines; 326, 350, 389, 400, 421, 428, or 455. Bolts have the correct notched head detailing. Perfect for your restoration. Complete 11 piece set.

Part Number: ENC-2026B
1967 - 1968 Pontiac Firebird Water Pump Divider Plates, Stainless Steel
1967 - 1968 Pontiac Firebird Water Pump Divider Plates, Stainless Steel
Our Price: $49.95

New high grade water pump divider plates for your Firebird. Exact fit for all 67 and 68 models. Done in stainless steel! Includes both plates. Occasionally these plates will not fit properly in certain water pumps because of the various length sizes of impellers. If you run in to this just give us a call.

Part Number: ENC-2119
1967 - 1968 Water Pump
1967 - 1968 Water Pump - New
Our Price: $89.95

Complete new water pump for your Firebird. Exact fit for all 67 - 68 Firebird models. This is a complete new water pump assembly. 8 bolt mounting hole location. From the base to the fan hub is 3 and 5/8 inches. Gasket included

Part Number: ENC-2119H
1967 - 1968 Water Pump to Timing Cover Bolt Kit
1967 - 1968 Water Pump to Timing Cover Bolts and Studs Kit
Our Price: $22.95

New correct design bolt and stud kit to mount your water pump to the timing cover. Exact fit for all 67 - 68 Firebirds with Pontiac V8 engines; 326 / 350 / 389 / 400 / 421 / 428 / 455. Bolts have the correct notched head detailing. Perfect for your concours restoration. Complete 16 piece set.

Part Number: ENC-2026
1967 - 1969 3 Core Row Firebird w/ Factory AC Small Block OE Style Radiator for Manual Trans, 23 Inch
1967 - 1969 3 Core Row Firebird w/ Factory AC Small Block OE Style Radiator for Manual Trans, 23 Inch
Our Price: $309.95

1967 - 1969 3 Core Row Firebird w/ Factory AC Small Block OE Style Radiator for Manual Trans, 23 Inch

This Original Style 3 Core Small Block with Factory AC 67 - 69 Firebird Copper Brass Radiator for Manual trans will keep you extra cool while keeping an original appearance. Our 67, 68, and 69 Firebird radiators are made in the USA with 2016 technology and maintain that original appearance. These radiators feature correct side mounting brackets like originals. This USA made radiator is backed with a 6-month limited warranty. Our Factory Style 3 Core / Row extra cool radiators are designed to meet or exceed original cooling specifications. Radiator cores are serpentine fin, with in-line tube construction 1/2" tubes on 9/16" centers.

Our restoration radiator installs exactly like original! Unlike aftermarket replacements, our radiator mounts correctly using original style brackets. Aftermarket radiators are usually not suited for installation to maintain originality. The original appearance is important to your restoration. Beware of replacement radiators which do not have the correct brackets for mounting.
This is a NEW Radiator that is equipped with a new tank and core, not a rebuilt! Comes complete with original style mounting brackets attached and installs as original to the radiator support

No Exchange Required! No Core Charge!

*2" Core for Extra Cooling Capabilities

Make / ModelPontiac Firebird
Year(s)1967-69
EngineV8
Notesw/ Factory Air, 23" Wide, Factory 2" Thick Core,
2-3/4" Thick Pass Tank at Core
MaterialCopper/Brass
TransmissionManual
Core Size17 x 23
Available Rows3
Cooler Size12-1/2x5/16 IF
Flow TypeCrossflow
Inlet Size1-1/2"
Outlet Size1-3/4"

Fits: 1967-69 Camaro small block V8 with Manual / 4SPD Trans and Factory Air Conditioning
1967-69 Firebird small block V8 with Manual / 4SPD Trans and Factory Air Conditioning

Part Number: RAD-4
1967 - 1969 Aluminum 23" Radiator 3 Row
1967 - 1969 Aluminum 23" Radiator 3 Row
Our Price: $229.95

NEW Aluminum 23" 67 - 69 Radiator.  Direct bolt in Radiator at a great cost.  Fits both automatic and manual transmisison firebirds.  Three rows of 11/16 tubing to keep you super cool. 3 row core thickness is 2 5/8". 
 
 
 
 PART NUMBER: RAD-308
1967 - 1969 Firebird Engine Temperature Sending Unit without Gauges with Warning Lights, Spade Adapter
1967 - 1969 Engine Temperature Sending Unit without Gauges with Warning Lights, Spade Adapter
Our Price: $24.95

Sender with out gauges spade type adapter. Fits all 67, 68 or 69 Firebirds with warning lights.

PART NUMBER: RAD-63
1967 - 1969 Firebird COLD-CASE LS Swap 23" Aluminum Radiator
1967 - 1969 Firebird COLD-CASE LS Swap 23" Aluminum Radiator
Our Price: $374.00
Sale Price: $325.00
You save $49.00!

This 23 inch LS Swap 1967 - 1969 Pontiac Firebird COLD-CASE radiator is Tig welded, 100% aluminum and absolutely beautiful. Don't buy a 3 or 4 row aluminum radiator! It doesn't cool as good as these oversize 2 row models with 1.25" cores, better flow and higher cooling rate.

PART NUMBER RAD-405
1967 - 1969 Firebird Engine Cooling Fan Four Blade, Original GM Used
1967 - 1969 Firebird Engine Cooling Fan Four Blade, Original GM Used
Our Price: $50.00

Rare original GM 4 blade engine cooling fan for your Firebird. Exact fit for all 67, 68, and 69 standard models. Nice and straight, ready to go. 18 inch diameter. The one you will receive will look similar to the one pictured.

PART NUMBER: RAD-83E
1967 - 1969 Firebird Radiator Fan Shroud V8, 9788883
1967 - 1969 Firebird Radiator Fan Shroud V8, 9788883
Our Price: $159.95

1967 - 1969 Premier Firebird Radiator Fan Shroud V8, 9788883 is now available

New PREMIUM QUALITY correct design engine cooling fan shroud for your 67 - 69 Firebird V8 models. This Premier V8 Fan Shroud is designed for all 1967 - 1969 Pontiac Firebird models with a V8. Replaces GM Part# 9788883 Perfectly.

Our NEW Premier fan shrouds are manufactured from high-quality injection-molded ABS. Each fan shroud features factory-correct reinforcement fins, flanges, and mounting points. All shrouds fit and function exactly like the original GM shrouds while maintaining a factory correct OEM appearance. The injection-molding process results in superb rigidity, clean edges, and a smooth and even finish. Developed for the discerning restorer who demands the highest quality fan shroud with an original cosmetic appearance.

*Measurements: 21" x 24-3/4" - 20-1/2" I.D

PART NUMBER: RAD-2818
1967 - 1969 Firebird Radiator Support Top Cover Filler Panel Hardware and Rubber Stopper Set
1967 - 1969 Firebird Radiator Support Top Cover Filler Panel Hardware and Rubber Stopper Set
Our Price: $14.95
Sale Price: $12.95
You save $2.00!

1967 - 1969 Firebird Radiator Support Top Cover Filler Panel Hardware and Rubber Stopper Set

New correct design 16 piece hardware and rubber stopper kit for the steel radiator to header panel filler plates. Exact fit for all first generation firebirds and trans ams. This is used to mount the factory Radiator Support Top Cover Filler Plates installed on all air conditioned or 400 engine equipped models. The Filler Plates can be added to any 67 - 69 model for a clean look under your hood with this new hardware and rubber stopper kit.

Part Number: RAD-2051H
1967 - 1969 Firebird Lower Fan Shroud Mounting Clips - Pair
1967 - 1969 Lower Fan Shroud Mounting Clips - Pair
Our Price: $2.00

Lower fan shroud mounting clips for 67 - 69 models.  2 required, sold as a pair.

Part Number: RAD-53
1967 - 1969 Lower Radiator Hose, All V8 Engines GM # 9788916
1967 - 1969 Lower Radiator Hose, All V8 Engines GM # 9788916
Our Price: $29.95

Exact size and bends.  Correct for all V8 engines.

Part Number: RAD-2011
1967 - 1969 Pontiac Firebird COLD-CASE 23" Aluminum Radiator for Automatic Trans
1967 - 1969 Pontiac Firebird COLD-CASE 23" Aluminum Radiator for Automatic Trans
Our Price: $374.00
Sale Price: $325.00
You save $49.00!

This 23 inch 1967 - 1969 Pontiac Firebird COLD-CASE radiator is Tig welded, 100% aluminum and absolutely beautiful. Don't buy a 3 or 4 row aluminum radiator! It doesn't cool as good as these oversize 2 row models with 1.25" cores, better flow and higher cooling rate.

Auto Trans

PART NUMBER RAD-403
1967 - 1969 Pontiac Firebird COLD-CASE 23" Aluminum Radiator for Manual Trans
1967 - 1969 Pontiac Firebird COLD-CASE 23" Aluminum Radiator for Manual Trans
Our Price: $374.00
Sale Price: $325.00
You save $49.00!

This 23 inch 1967 - 1969 Pontiac Firebird COLD-CASE radiator is Tig welded, 100% aluminum and absolutely beautiful. Don't buy a 3 or 4 row aluminum radiator! It doesn't cool as good as these oversize 2 row models with 1.25" cores, better flow and higher cooling rate.

Manual Trans

PART NUMBER RAD-404
1967 - 1969 Firebird Radiator Fan Shroud Mounting Clip
1967 - 1969 Radiator Fan Shroud Mounting Clip
Our Price: $2.25

Firebird radiator fan shroud mounting clip. This clip is 1967, 1968, and 1969 models. This clip is assembly line correct. Replaces original GM part# 3899980. Made in the USA! Radiator fan shroud installation instructions can be found by opening the Factory Assembly Manual to UPC 11/13 B4 (1969) or A8 (1967). This clip is sold individually. Clip measures 1&1/16" Long and 1/2" Wide. .17 Opening X .10 P "S" Clip.

Part Number: RAD-54F
1967 - 1969 Radiator Fan Shroud, Aluminum, Custom Fit, 10 Inch Electric Fans Included
1967 - 1969 Radiator Fan Shroud, Aluminum, Custom Fit, 10 Inch Electric Fans Included
Our Price: $199.95

New Custom Aluminum Fan Shroud with two 10" Electric Fans for 67 - 69 Firebird. Made to fit our aluminum radiators this kit adds the look and cooling power you deserve. Shroud and fan kit can be retro fitted to your factory radiator for extra cooling power. This unit measures 22 3/4" x 17 1/4". Fits 23" Radiators

PART NUMBER RAD-309A
1967 - 1969 Radiator Mounting Set
1967 - 1969 Radiator Mounting Set
Our Price: $9.95

Radiator mounting set for 67 - 69 models.  Includes two LH rubber grommet nuts and bolts and two hex head bolts that mount the RH side.

Part Number: RAD-33
1967 - 1969 Radiator, 4 Core 21", Automatic
1967 - 1969 Radiator, 4 Core 21", Automatic
Our Price: $349.95

Stay cool with one of our replacement radiators for 67 - 69 Firebird automatics. Our radiators are made with 2010 technology and maintain the original appearance. These radiators feature correct side mounting brackets like originals. Our radiators are made in the USA with a full 1 year warranty. We offer radiators in the factory 3 core design and 4 core design for extra cooling capabilities. Radiator cores are serpentine fin, with in-line tube construction 1/2" tubes on 9/16 centers.


Make / ModelPontiac Firebird
Year(s)1967-69
EngineV8
Notes20-3/4" Wide Core
MaterialCopper/Brass
TransmissionAutomatic
Core Size17 x 20-3/4
Rows4
Cooler Size12-1/2x5/16 IF
Flow TypeCrossflow
Inlet Size1-1/2"
Outlet Size1-3/4"

Part Number: RAD-5
1967 - 1970 Aluminum Thermostat Water Neck Housing, 9779072
1967 - 1970 Firebird and Trans Am Aluminum Thermostat Water Neck Housing, 9779072
Our Price: $26.95
Sale Price: $24.50
You save $2.45!

1967 - 1970 Firebird and Trans Am Aluminum Thermostat Water Neck Housing, 9779072

New intake water neck thermostat housing for your 1967 - 1970 Firebird or Trans Am. Exact fit for all 67, 68, 69, and 70 models. Correct aluminum design, shape, and fit. Replaces original GM with part number 9779072 stamped. Use with our Hardware Set, ENC-2072B, to get the job done right the first time!

Part Number: ENC-2072
1967 - 1970 Upper Radiator Hose, All V8 Engines GM # 9796090
1967 - 1970 Upper Radiator Hose, All V8 Engines GM # 9796090
Our Price: $29.95

New upper radiator hose for your Firebird or Trans Am. Exact size and bends. Correct for all V8 engines. Original GM part number ink stamped 9796090.

Fits all 67, 68, 69, and 70 V8 models

Part Number: RAD-2010
1967 - 1972 Firebird Radiator Overflow Hose
1967 - 1972 Firebird Radiator Overflow Hose
Our Price: $4.95

New correct style rubber radiator overflow hose for your Firebird or Trans Am. Exact fit for all 67, 68, 69, 70, 71, and 72 models. Ribbed outer wall like factory originals.

Part Number: RAD-50
1967 - 1972 Firebird Radiator Support Brace Top Nose Bumper Bracket Stabilizer Bushing
1967 - 1972 Firebird Radiator Support Brace Top Nose Bumper Bracket Stabilizer Bushing, Each
Our Price: $19.95

1967 - 1972 Firebird Radiator Support Brace Top Nose Bumper Bracket Stabilizer Bushing

New correct design upper radiator support bushing for your bird. Works great for all 67, 68, 69, 70, 71, or 72 Firebird and Trans Am models. Exact rubber inner core with steel lower cup. Correct 5/16 stud size on both ends. Two requierd per car, Sold as each.

Part Number: BUM-2004
1967 - 1974 Radiator Pressure Cap w/ Small Ears
1967 - 1974 Radiator Pressure Cap w/ Small Ears
Our Price: $19.95

AC Delco original type replacement cap with small ears for 67-74 models.  Correct stainless steel 15 LBS radiator cap with rivet.  Order yours today.

PART NUMBER: RAD-43
1967 - 1974 Stainless Inner Fender Heater Hose Clamp Support Bracket
1967 - 1974 Stainless Inner Fender Heater Hose Clamp Support Bracket
Our Price: $25.95

Polished Stainless inner fender heater hose clamp support bracket for 67-74 models. Upgrade your Firebird to this awesome stainless steel 2 piece heater hose clamp bracket.  Mounts at your inner fender. 73 and 74 models require 2. Sold each.

Part Number: HTR-70S
1967 - 1979 Engine Brackets to Block Bolt with OE Head, EACH
1967 - 1979 Engine Brackets to Block Bolt with OE Head, EACH
Our Price: $2.95

New correct design bolt to mount your engine brackets to block. Exact fit for all 67 - 79 Pontiac engines 326 / 350 / 400 / 455 in Firebirds and Trans Ams. This bolt features the correct OE style notched / slotted head. Perfect for your concourse restoration. These bolts can be used for power steering brackets, alternator brackets, AC brackets...ect. Sold each so please check quantity needed.

Size: 7/16-14 X 7/8
11/16 AF

Part Number: ENC-2137
1967 - 1979 Engine Fan and Clutch Mounting Bolt Hardware Set
1967 - 1979 Engine Fan and Clutch Mounting Bolt Hardware Set
Our Price: $10.95

Complete engine fan and clutch mounting bolt set for 67 - 79 Firebird models. Includes bolts, nuts, and washers to mount your engine fan and clutch. 20 piece kit. This set includes four 1'' fine thread bolts, four 1 1/4'' studs that are fine thread (7/16'') / coarse thread (5/8'') , 4 fine thread nuts, and 8 lock washers.

Part Number: RAD-743
1967 - 1979 Engine Fan Blade to Fan Clutch Bolt Kit with OE Heads
1967 - 1979 Engine Fan Blade to Fan Clutch Bolt Kit with OE Heads
Our Price: $5.95

New correct set of bolts to mount your engine fan to the fan clutch.  Exact fit for all models that have a fan clutch.  Fits all 67 - 79 Pontiac engines 326 / 350 / 400 / 455 in Firebirds and Trans Ams.  These bolts feature the correct oe style notched heads.  Perfect for your concours restoration.  Sold as a matched set of four.

Part Number: ENC-2027
1967 - 1979 Firebird 3/4" Heater Hose Tower Style Clamp, 1-3/16", Each
1967 - 1979 Firebird 3/4" Heater Hose Tower Style Clamp, 1-3/16", Each
Our Price: $2.95

1967 - 1979 3/4" Firebird Heater Hose Tower Style Clamp, 1-3/16", Each

1-3/16" tower style hose clamp for 67 - 79 Firebird models. Fits 3/4" heater hose. Sold each. Replaces original GM Part #'s 9414923, 9423576, and 9423577.

Part Number: RAD-135