You are here:Home > Sheet Metal > Hoods
Sort By:
Page of 1
1967 - 1968 Hood & Panel Rubber Side Bumper Stoppers , 4 Piece
1967 - 1968 Hood & Panel Rubber Side Bumper Stoppers , 4 Piece
Our Price: $6.95

New set of  hood side and forward panel stoppers for your bird.  Exact fit for all 67 - 68 firebird models.  The larger ones go towards the front area and the smaller ones are kinda in the middle.  Includes all 4 side hood bumper stops.

Part Number: WEA-2005
1967 - 1968 Hood Latch Assembly, GM Original Used
1967 - 1968 Hood Latch Assembly, GM Original Used
Our Price: $300.00

Real GM hood latch release mechanism assembly for your bird.  Exact fit for all 67 - 68 Firebird models.  This is an original GM used assembly.  The one you will receive will look similar to the one pictured, above average with no major damage.  These are hard to find in any condition.  We will make sure it functions as it should.

PART NUMBER: SHE-2616U
1967 - 1968 Hood Release Latch Mechanism Assembly with Handle
Our Price: $109.95
Sale Price: $99.95
You save $10.00!

Correct hood latch release mechanism assembly for your firebird.  Exact fit for all 67 - 68 models.  New latch with handle for all 67 - 68 Firebird Hoods.  Look nomore for this ultra hard to find part, order yours today!!  

Part Number: SHE-2614
1967 - 1969 Billet Aluminum Hood Hinges
Our Price: $650.00

One of our best-selling hinges ever, the H-1309 hinge was designed to fit the 1967, 1968, and 1969 Pontiac Firebird. However, the H-1309s also fit several other makes/models including 1967-1969 Camaros, 1965–1967 Chevelles, Monte Carlos, El Caminos, Impalas, 1966-1967 Novas* and even early model Holdens. Originally designed in 2007 and then improved in 2008 with 9 more inches of hood opening, our H-1309 hinge is our most versitally reliable hood hinge. As with all our products, the H-1309 were designed in our Scottsdale facility and then manufactured using only the best grades of aluminum, bearings and hardware. Each set is hand assembled in house after rigorous quality control checks.

PART NUMBER: SHE-1300
1967 - 1969 Hood Hinge Kit
Our Price: $129.95

67 - 69 Firebird replacement quality hood hinge kit. Black EDP coating, correct gauge of steel. Quality construction for your Camaro. Just order one part# and take care of the hood hinges. Imported.

*Note: Springs in kit are for steel hoods.

Part Number: SHE-114K
1969 Hood Latch Release Pop Assist Spring
1967 - 1969 Hood Latch Release Pop Assist Spring
Our Price: $9.95

New hood latch release spring for your bird. Exact fit for all 67 - 68 - 69 Firebird and Trans Am models. This is the spring that goes on top of your hood latch release catch mechanism. It helps " pop " your hood up when you the pull the handle. Correct shape, size, and fit.

**Common cure for a hood that wont pop up!

Part Number: SHE-2562
1969 Hood Latch Release Pop Assist Spring
1967 - 1969 Hood Latch Release Pop Assist Spring Retainer
Our Price: $4.95

New hood latch release spring reatainer and bolt for your bird. Exact fit for all 67 - 69 Firebird and Trans Am models. This is the retainer that holds the spring that goes on top of your hood latch release catch mechanism. Correct shape, size, and fit.

Part Number: SHE-2562A
1967 - 1969 Ram Air Hood Scoops for 400 Hood - Open Design
1967 - 1969 Ram Air Hood Scoops for 400 Hood - Open Design
Our Price: $89.95

Original factory style open hood scoop inserts for 67-69 Ram Air Firebird 400 models.  They are open with inner ribbed area cut out and come in die cast black primer.  Sold as a pair one left and one right.  
   
Part Number: SHE-2524
1967 - 1969 Under Hood Insulation Pad
1967 - 1969 Under Hood Insulation Pad
Our Price: $29.95

New under hood insulation pad for your firebird. Exact fit for all 67 - 69 models, except if you have a functional ram air set up. Dye cut one inch thick, non-molded, easy to ship and install.

Part Number: SHE-2020
1967 - 1981 Hood Adjust Rubber Bumper Stoppers - Pair
1967 - 1981 Forward Hood Adjust Rubber Bumper Stoppers - Pair
Our Price: $2.95

New forward radiator support hood adjust rubber bumpers. Sold as a matched pair.
Correct for all;
67 - 69 firebird and trans am models
73 - 81 firebird and trans am models

Part Number: WEA-44
1973 - 1981 Forward Hood Adjustment Bolts Set
1967 - 1981 Forward Hood Adjustment Bolts Set
Our Price: $7.95

New forward radiator support hood adjust screws and nuts set. These are the adjustment bolts that install onto your radiator support. Includes 2 studs and 2 nuts.
Correct for all;
67 - 69 firebird and trans am models
73 - 81 firebird and trans am models

Part Number: SHE-103
1967 - 1981 Radiator Support Hood Adjust Bolt and Bumper Kit
1967 - 1981 Forward Radiator Support Hood Adjust Bolt and Bumper Kit
Our Price: $8.95

New complete hood adjust bolt and bumper kit for your firebird. These are the hood adjust bolts that mount to the radiator core support to help align your hood. Includes both rubber stops, bolts, and nuts.
Correct for all;
67 - 69 firebird and trans am models
73 - 81 firebird and trans am models

Part Number: SHE-103K
1967 - 1981 Stainless Steel Hood Struts for Steel Hoods - Pair
Our Price: $104.95

New hood shocks / struts for your firebird.  These are designed for all our different billet aluminum hood hinge choices.  If your running a steel hood, you need a stiff strut like these.  Done in high grade stainless steel.  Sold as a matched pair only.

PART NUMBER: SHE-1307
1967 - 2002 Flip-over Style BLACK Aluminum Hood Pin Kit
Our Price: $24.95
Sale Price: $19.95
You save $5.00!

New BLACK aluminum hood pin kits are now available at a rock bottom price!!  Thess hood pin set includes the flip-over style pins for easy operation.  Complete set of black anodized hood pins ready to install on almost any vehicle hood.  Great addition to any Camaro, Chevelle, Firebird or Nova.  Aluminum construction with an anodized finish for great looks and perfect function.  Order your kit today!

PART NUMBER: SHE-946
1967 Firewall Slick Panel WITH Wiper Hole and NO Heater
Our Price: $109.95

Firewall slick panel for 67 models with wiper hole, but no heater. Premium quality! These panels are made of 18ga anodized aluminum so they are easy to clean and can be painted to match. No need to remove your engine or even your distributor. Panels can be attached however you choose. Can be easily drilled for A/C fittings or wiring if needed.

Part Number: SHE-581
1967 Firewall Slick Panel WITH Wiper Motor Hole and Heater Box Hole
Our Price: $109.95

Firewall slick panel for 67 models with round wiper motor hole and heater box hole.  Premium quality! These panels are made of 18ga anodized aluminum so they are easy to clean and can be painted to match. No need to remove your engine or even your distributor. Panels can be attached however you choose. Can be easily drilled for A/C fittings or wiring if needed.


Part Number: SHE-582
1967-1968 Rear Hood Side to Fender Rubber Bumper Stop
Our Price: $1.95

New correct design size and shape.  Two required per car, sold each.

Part Number: WEA-2017
1967-1969 Billet Aluminum Hood Hinges (Polished)
Our Price: $539.95

1967-1969 Firebird Billet Hood Hinge Set with out any ugly logos.  These billet hood hinges are CNC machined to perfection and made in the USA.  They are made of 6061-T6 billet aluminum and utilize sealed bearings for smooth and long lasting operation.  This product is polished to a show quality shine at a fraction of the cost compaired to other polished billet hood hinges.  This is truly a great buy!!

Part Number: SHE-1301
1967-1969 Billet Hood Hinges Fusion Coated
1967-1969 Billet Hood Hinges Fusion Coated
Our Price: $599.95

Our billet hood hinges are CNC machined to perfection.  They are made of 6061-T6 billet aluminum and utilize sealed bearings for smooth and long lasting operation.  Great value without sacrificing quality.  These hinges fit 1967-1969 Firebird's and have a fusion coated finish.

Please choose from the availble color options: Black, Blue, Orange, Red, or Silver.

PART NUMBER: SHE-1305
1967-1969 Billet Hood Hinges Satin Finish
1967-1969 Billet Hood Hinges Satin Finish
Our Price: $599.95

These billet hood hinges are CNC machined to perfection.  They are made of 6061-T6 billet aluminum and utilize sealed bearings for smooth and long lasting operation.  Our hinges come complete with stainless steel gas struts and mounting hardware.

PART NUMBER: SHE-1304
1967-1969 Fender Core Support Bars - Black Anodized
1967-1969 Custom Fender Core Support Bars - Black Anodized
Our Price: $179.95

Fender core support bars machined for 67-69 models.  Black anodized.  Sold as a pair.  Mounting hardware included.

Part Number: SHE-1241
1967-1969 Fender Core Support Bars in Billet Aluminum - Brushed Finish
Our Price: $149.95

CNC machined from solid 7075-T6 aluminum, ProStyle™ core support bars feature intricate ball milled and slotted detail that will modernize and dress-up your engine compartment.

Part Number: SHE-1228
1967-1969 Firebird 400 Hood - Steel - OE Style
1967-1969 Firebird 400 Hood - Steel - OE Style
Our Price: $399.95

This hood is designed and manufactured to original specifications for a perfect fit offering a high quality appearance for any serious restorer.  Originally installed on all 1967-1969 Firebird models.

Part Number: SHE-2502
1967-1969 Firebird 400 Hood Scoop Louver Inserts - Pair
1967-1969 Firebird 400 Hood Scoop Louver Inserts - Pair
Our Price: $89.95

Correct right hand and left hand pair.  Exact fit for all 67-69 400 hoods.  Premium quality.

Part Number: SHE-2000
1967-1969 Firebird GM NOS Hood to Cowl Seal
1967-1969 Firebird GM NOS Hood to Cowl Seal
Our Price: $50.00

GM Original New Old Stock Hood to Cowl Seal. In The Original Gm Box!
 
PART NUMBER: 3927464
1967-1969 Firebird Hood Hinge Spring Each
Our Price: $17.95

Correct 67-69 hood hinge spring.  Premium quality, made in the USA!  Sold each.

Part Number: SHE-121
1967-1969 Firewall Slick Panel, No Holes
Our Price: $109.95

Firewall Slick Panel with no holes. Premium quality! These panels are made of 18ga anodized aluminum so they are easy to clean and can be painted to match. Easy to install, no need to remove your engine or even your distributor. Panels can be attached however you choose. Can be easily drilled for A/C fittings or wiring if needed.


Part Number: SHE-580
1967-1969 Firewall Slick Panel, With Heater Hole and Without Wiper Hole
1967-1969 Firewall Slick Panel, With Heater Hole and Without Wiper Hole
Our Price: $109.95

Firewall Slick Panel with heater hole and without wiper hole.  Premium quality!  These panels are made of 18ga anodized aluminum so they are easy to clean and can be painted to match.  Easy to install, no need to remove your engine or even your distributor.  Panels can be attached however you choose.  Can be easily drilled for A/C fittings or wiring if needed.

Firebird Years: 1967 1968 1969

Part Number: SHE-580H
1967-1969 Forward Corner Hood Side to Fender Rubber Bumper Stop
1967-1969 Forward Corner Hood Side to Fender Rubber Bumper Stop
Our Price: $1.95

New correct design rubber bumper stop.  This one mounts under your hood near each front corner at the gusset panel.  Exact fit for all 67-69 models.  Two required per car, sold as each.

Part Number: WEA-2016
1967-1969 Hood Hinge LH
Our Price: $49.95

Hood hinge for 67-69 models, left hand driver side.  Imported.

Part Number: SHE-115
1967-1969 Hood Hinge RH
Our Price: $49.95

Hood hinge for 67-69 models, right hand passenger side.  Imported.

Part Number: SHE-114
1967-1969 Hood Latch & Catch Stainless Steel Indented Hex Head Bolt Kit
1967-1969 Hood Latch & Catch Stainless Steel Indented Hex Head Bolt Kit
Our Price: $12.95

Stainless steel and indented hood latch and catch hex head bolt kit for 67-69 models.

Part Number: HWR-636
1967-1969 Hood Release Latch Mechanism Side Support Brace
1967-1969 Hood Release Latch Mechanism Side Support Brace
Our Price: $22.95

This is the long piece metal that runs diagonal on the side of your hood latch assembly.  Exact fit for all 67-69 models.

PART NUMBER: SHE-2615
1967-1969 Molded Hood Insulation Pad
Our Price: $79.95

Molded hood insulation pad for 67-69 models.  Exactly stamped as factory original.  Excellent quality!

Part Number: SHE-2019
1967-1969 Show Chrome Hood Hinge Set
Our Price: $349.95

Premium quality, original guage.  Accurately stamped from high strength steel.  Heavy duty construction with hardened pivot points.  All parts polished then chrome plated.  Show quality.

Part Number: SHE-1008
1967-1981 Custom Hood Adjust Bolt & Bumper Set - Natural Finish
Our Price: $59.95

Machined from solid 304 stainless steel to be used for direct replacement of the factory units.  Show car ready and made in the USA!  New bump stop rubber provided.  Correct for all 67-81 models.  Sold as a pair only.

Part Number: SHE-808
1967-1981 Hood Hinge Bolts 8 Piece Set
Our Price: $9.95

Hardware set to mount hood hinges. 8 pieces  does both sides.

Part Number: SHE-116
1967-1981 Hood Hinge Spring Set for Fiberglass Hoods , Pair
Our Price: $28.95

New hood hinge springs for all light weight fiberglass hoods.  These are really designed for aftermarket fiberglass hoods.  If you have a 70-81 original GM formula style hood, you may want to use our part number # SHE-122.  Fits all stock factory style hinges.  Premium quality!  Sold in a pair only.


Part Number: SHE-223
1967-1981 Stainless Steel Hood Struts for Fiberglass Hood
1967-1981 Stainless Steel Hood / Trunk Deck Lid Struts - Pair
Our Price: $104.95

New hood and or trunk deck lid struts for your firebird.  These are designed for all our different billet aluminum hood and deck lid hinge choices.  If your running a fiberglass hood, or any version trunk deck lid you need a less stiff strut like these.  Done in high grade stainless steel.  Sold as pairs only.

PART NUMBER: SHE-1306
1968-1969 Firewall Slick Panel WITH Wiper Motor Hole and Heater Box Hole
Our Price: $109.95

Firewall slick panel for 68-69 models with wiper motor hole and heater box hole.  Premium quality! These panels are made of 18ga anodized aluminum so they are easy to clean and can be painted to match. No need to remove your engine or even your distributor. Panels can be attached however you choose. Can be easily drilled for A/C fittings or wiring if needed.

Part Number: SHE-584
1968-1969 Firewall Slick Panel WITH Wiper Motor Hole and NO Heater Box Hole
Our Price: $109.95

Firewall slick panel for 68-69 models with wiper motor hole and without heater box hole.  Premium quality! These panels are made of 18ga anodized aluminum so they are easy to clean and can be painted to match. Easy to install, no need to remove your engine or even your distributor. Panels can be attached however you choose. Can be easily drilled for A/C fittings or wiring if needed.


Part Number: SHE-583
1968-1969 SS Hood Louver Gasket
Our Price: $7.95

This is the gasket designed to prevent moisture from being trapped under your hood.  Adhesive backed sponge foam.  Sold each.

Part Number: SHE-128
1969 Firebird Header Panel Bumper Filler Seal Set
1969 Firebird Header Panel Bumper Filler Panel and Seal Set
Our Price: $139.95

New correct design front bumper nose filler panel assembly.  Includes pre-installed rubber filler seal and mounting studs.  A premium quality product that can replace your damaged or missing original in minutes.  

PART NUMBER SHE-2100
1969 Firebird Trans Am Hood - All Steel - OE Style
1969 Firebird Trans Am Hood - All Steel - OE Style
Our Price: $569.95
Sale Price: $539.95
You save $30.00!

New factory style 1969 T/A hood.  This all steel hood is a direct replacement for the original 1969 Trans Am hood.  Perfect fit and details along with a great price make it easy to choose this hood.  Works great for all 67-69 firebird models.

Part Number: SHE-2531
1969 Hood Latch Release Mechanism Assembly
Our Price: $139.95

Hood latch release mechanism assembly for your 69 Firebird.

Part Number: SHE-2613
1969 Hood Release Handle
Our Price: $25.95

Hood release handle that will fit 1969 models.

Part Number: SHE-2528
1969 Hood Side Rubber Bumper Stoppers - 4 Piece Set
1969 Hood Side Rubber Bumper Stoppers - 4 Piece Set
Our Price: $7.95

New hood side rubber bumper stoppers for your bird.  Exact fit for all 69 firebird and trans am models.  Matched set of 4.  Premium quality!

Part Number: WEA-2014
1969 Rear Hood Side to Fender Rubber Bumper Stops
Our Price: $1.95

Hood side to fender rubber bumper stops for 69 models.  New correct size and shape.  Two required per car, sold as each.

Part Number: WEA-2015
1970 - 1972 Firebird Hood Adjust Rubber Bumpers
1970 - 1972 Firebird Hood Adjust Rubber Bumpers Pair
Our Price: $8.95

New correct design cone shaped hood adjust bumpers.  Exact fit for all 70 - 72 models; Firebird and Trans Am.  Sold as a matched pair only, does one car.

PART NUMBER: SHE-2105A
1970 - 1972 Hood Latch Catch Release Handle
1970 - 1972 Hood Latch Catch Release Handle and Mounting Clip
Our Price: $29.95

New hood latch release handle for your bird.  Exact fit for all 70 - 72 Firebird and Trans Am models.  This is the handle with mounting clip only.  The latch mechanism is not included and is shown for reference only.  Hard to find GM piece that's ready to go.  

Part Number: SHE-2529E
1970 - 1972 Radiator Support Hood Latch Brace, Used GM
Our Price: $200.00

Correct original GM radiator support to valance / hood latch release brace. Exact fit for all 70 - 72 Firebird and Trans Am models. Currently available as a used GM item only. The one you receive will look similar to the one pictured, above average with no major issues.

PART NUMBER: SHE-2721
1970 - 1972 Trans Am Shaker Hood Scoop Assembly, OE Style
1970 - 1972 Trans Am Shaker Hood Scoop Assembly, OE Style
Our Price: $299.95

New correct design hood scoop assembly for your bird. Exact fit for all 70 - 72 Trans am models. Includes functional rear door flapper, actuator to door rod, and actuator strap bracket. Perfect for factory side / tab stud mount air cleaner bases. Drain hose fitting in the front corner as original. OE style look, fit, and feel.

Part Number: SHE-2543
1970 - 1976 Firebird Standard Flat Hood
Our Price: $579.99

New factory style 1970-1976 Firebird standard hood.  This all steel hood is a direct replacement for the original 1970-1976 Firebird standard hood.  Perfect fit and details along with a great price makes it easy to choose this hood.  Works great for all 70 - 76 firebird models.
Part Number: SHE-2573
1970 - 1976 Firebird Trans Am Shaker Hood Scoop Drain Hose Nipple
1970 - 1976 Firebird Trans Am Shaker Hood Scoop Drain Hose Nipple
Our Price: $15.95

New factory style Trans Am and Firebird shaker hood drain hose nipple.  Correct T/A shaker hood scoop drain hose nipple.  Installs on the drivers side forward corner of your shaker hood scoop base.  Molded hose slides right on to this fitting.  Fits all 70 - 76 Trans Am models.

Years: 1970 1971 1972 1973 1974 1975 1976

PART NUMBER: SHE-2576
1970 - 1976 Hood Insulation Pad for Shaker Hood
Our Price: $29.95

New hood insulation pad for your Trans Am. Exact fit for all 70 - 76 models with the Shaker Hood. Dye cut one inch thick, non-molded.

Part Number: SHE-2021A
1970 - 1976 Trans Am T/A Shaker Hood - OE Style - Steel
Our Price: $569.95

Brand new steel Shaker Hood for 1970-76 Firebird Trans Am models. This steel hood is manufactured to factory specifications using high grade steel as original.  Each hood features the original shape, contours, and correct underhood bracing.  Each hood has a pre-cut opening in the exact location so shaker hood components will install properly.  All hoods are EDP coated for rust prevention and are ready to prep and paint.  Look no more for this ultra hard to find hood, order yours today!

Fits all 70 71 72 73 74 75 and 76 Trans Am Models

Part Number: SHE-2569
1970 - 1981 Billet Aluminum Hood Hinges (Polished)
Our Price: $659.95
Sale Price: $625.00
You save $34.95!

70 - 81 Billet aluminum hood hinge set without any ugly logos. These billet hood hinges are CNC machined to perfection adn made in the USA. They are made of 6061-T6 billet aluminum and utilize sealed bearings for smooth and long lasting operation. This product is polished to a show quality shine at a fraction of the cost compaired to other polished billet hood hinges. This is truly a great buy!!

USA MADE

PART NUMBER: SHE-1303
1970 - 1981 Firebird Cowl Panel Rear Hood Adjust Bolt and Bumper
1970 - 1981 Center Cowl Panel Rear Hood Adjust Bolt and Bumper
Our Price: $5.95

New rear hood cowl panel adjust bolt and bumper for your Firebird.  This hood adjust bolt  mounts to the center upper cowl panel to help align your hood.  Includes both rubber stop and bolt.
Size 5/16-18 x 1.50"

Part Number: SHE-104
1970 - 1981 Firebird Hood Pop Spring
Our Price: $19.95

Brand new hood pop spring for all 1970-81 Firebird models.  Manufactured with correct contours, this spring will pop the hood up for access when the hood release lever is actuated.  Exact fit for all 70-81 models.  Exact shape, size, and details.

Replaces GM# 494409

Part Number: SHE-2886
1970 - 1981 Firebird Rear Hood Adjust Rubber Bumper Stopper, PAIR
1970 - 1981 Firebird Rear Hood Adjust Rubber Bumper Stopper, PAIR
Our Price: $6.95

New tooling, correct rear hood adjust bumper for all 70 - 81 Firebird models.  Mount on each side of your cowl panel.  Two required per car and now sold in a PAIR!  New tooling ensures a proper fit with exact details for an original look.  Made with a new high grade rubber compound to last for years to come.  Order your a pair today!

Replaces GM Part # 3973952

Part Number: WEA-45P
1970 - 1981 Hood Adjustment, Center Rear Set
1970 - 1981 Hood Adjustment, Center Rear Set
Our Price: $14.95

Correct reproduction center hood support kit. Center hood adjuster is required for all Firebird models equipped with hidden wipers. Adjuster kit keeps proper clearance for wipers to retract below hood edge. Includes both rubber stop, bolt, retaining nut, clip and reinforcement bracket. Size 5/16-18 x 1.50"

Part Number: SHE-104K
1970 - 1981 Hood Hinge Kit
Our Price: $139.95

New 70 - 81 Firebird hood hinge kit. Black EDP coating, correct gauge of steel. Quality construction for your Firebird. Just order one part# and take care of the hood hinges.

*Note: Springs in kit are for steel hoods.

Part Number: SHE-117K
1970 - 1981 Rear Hood Adjuster Bolt and Bumper Set
1970 - 1981 Rear Hood Adjuster Bolt and Bumper Set
Our Price: $12.95

New tooling, correct rear hood adjust bolt & bumper set for all 70 - 81 Firebird models. Accurate reproduction. Hardened bolts and jamb nuts with rubber bumpers provide adjustment for rear hood height and as a safety catch for hood hinges in the event of a hard front end crash. These bolts properly adjusted will lock into the hood hinges and keep the hood from the windshield. Order your a pair today! Replaces GM Part # 3973952

Part Number: SHE-133
1970-1972 Hood Adjust Studs, Nuts, and Bumpers Set
1970-1972 Hood Adjust Studs, Nuts, and Bumpers Set
Our Price: $21.95

New correct design radiator support hood adjust bumpers for your Bird.  Includes both Phillips head studs with mounting nuts and cone shaped rubbers.

PART NUMBER: SHE-2105
1970-1976 Hood Insulation Pad for Flat or Formula Hoods
Our Price: $29.95

New hood insulation pad for your firebird.  Exact fit for all 70 - 76 models with flat or formula style hoods.  Dye cut thick insulation pad, non-molded.  Premium quality!  Includes ten installation clips.

Part Number: SHE-2021
1970-1976 Rear Hood Scoop Block Off Filler Plate
1970-1976 Rear Hood Scoop Block Off Filler Plate
Our Price: $16.95

New OE style steel plate that blocks off the back side of your hood scoop.  This plate was factory installed on all 73 - 76 trans ams.  Can be used for 70 - 72 if you dont want the flapper door.  Three pre-drilled holes for an easy fit.  This plate mounts onto an inner brace ring thats inside your hood scoop.

PART NUMBER: SHE-2532
1970-1976 Trans Am Shaker Scoop to Hood Rubber Seal
Our Price: $49.95

New correct design shaker scoop to hood seal for your Trans Am.  Exact fit for all 70 - 76 hood scoops.  Manufactured to exact factory specifications.  Super easy to install, just wraps around your hood scoop outer lip.

Part Number: WEA-2100
1970-1981 Firebird Billet Aluminum Hood Hinges Pair
Our Price: $759.95

1970-1981 Firebird billet hood hinges made from the finest quality aluminum 6061 T6 and use weatherproof bearings and stainless steel hardware to ensure proper operation in any climate.  Engineered for smooth and effortless operation. Each hinge is machined to perfection in a manner which is fully functional and visually appealing as well. We offer these amazing billet hinges in three diffrent finishes: RAW, POLISHED, or Black ANODIZED. Please choose struts for either a fiberglass or steel hood.

Part Number: SHE-950
1970-1981 Hood Hinge LH
Our Price: $54.95

Hood hinge for left hand driver side on 70-81 models.

Part Number: SHE-118
1970-1981 Hood Hinge RH
Our Price: $54.95

Hood hinge for right hand passenger side on 70-81 models.

Part Number: SHE-117
1970-1981 Hood Hinge Spring
Our Price: $15.95

1970-1981 Firebird hood hinge spring.  Sold each.

Part Number: SHE-122
1970-1981 Hood Latch Release Mechanism Assembly
Our Price: $49.95

New correct design hood latch release for your bird.  Exact fit for all 70-81 models.  Exact shape, size, and details.

Part Number: SHE-2885
1970-1981 Pontiac Hood Panel Side Bumper
Our Price: $1.95

New correct design hood side bumper.  Six required per car, sold as each.  Fits all PONTIAC Need all six? Check out part # WEA-2002S.

1970-1981 Firebird and Trans am

Part Number: WEA-2002
1970-1981 Pontiac Hood Panel Side Bumpers
Our Price: $10.95

New correct design hood side bumpers.  Pack of 6 for the entire hood.  Fits all PONTIAC. If you need just one, check out part # WEA-2002.
1970-1981 Firebird and Trans am

Part Number: WEA-2002S
1970-1981 Rear Hood Adjust Rubber Bumper Stopper, Each
Our Price: $4.95

Correct rear hood adjust bumper for 70-81 models.  Mount on each side of your cowl panel.  Two required per car.  Sold as each.

Part Number: WEA-45
1973 - 1976 Trans Am Functional Flapper Shaker Hood Scoop Conversion Kit
Our Price: $154.95

This is an amazing new kit that wires directly to your fuse box on the ignition side.  This allows the shaker hood scoop flab to open like original 1970 - 1972 shaker hood scoops.  With this new kit you can allow air to flow in for improved performance and close to keep outside elements out of your 73 -76 Trans Am.  Designed with an electric solenoid for 12V current to improve durability.  This is an easy do-it-yourself kit  that wires directly to your fuse box so the flap opens when the engine is started.  Each kit comes complete with a detailed instruction manual with pictures and text.  You must use your original hood scoop or buy a new one, hood scoop is not included in this great kit.

*You can choose to add a Kick Down Switch and bracket to have the flap activated when stepping hard on the accelerator.  
*This switch is only needed on 4 speed cars and 75 - 76 models ( 73 and 74 cars with TH 400 already have this Kick Down Switch from the factory.)
**Fits ALL 1973 1974 1975 1976 models with a 400 or 455 engine.
**Can also be used with 70 - 72 models, call 1.859.624.1979 for more info

Part Number: SHE-2537
1973 - 1976 Trans Am Shaker Hood Scoop Rear Flapper Assembly
Our Price: $54.95

Replace your original Shaker Hood Block Off Plate with this functional flapper.  This flapper kit with allow fresh air to flow into the shaker hood scoop when the carburetor pressure is high or you are running at high speeds.  This flap is only activated by pressure.  The pressure produced by the carburetor will open the flap and close once the gas pedal is released.  The part GM forgot to make!  Order this amazing flapper kit today.

*Fits all 73 - 76 Trans Am Shaker Hood Scoops.  Can also work for 70 - 72 models, call 1.859.408.2005 for more info.

Part Number: SHE-2540
1973 - 1976 Trans Am Shaker Hood Scoop Rivet Bolt Set ( 13 PCS )
1973 - 1976 Trans Am Shaker Hood Scoop Rivet Bolt Set - 13 Pieces
Our Price: $15.95

Original style rivet head bolt and nut set.  You do not have to worry about having a rivet gun with this rivet bolt set.  Superior detail given.  These are the correct looking rivets to mount your hood scoop to the lower metal bracing.  Made in the USA.

PART NUMBER: SHE-2535C
1973 Radiator Support Hood Latch Brace, Used GM
Our Price: $200.00

Correct original GM radiator support to valance / hood latch release brace. Exact fit for all 73 Firebird and Trans Am models. Currently available as a used GM item only. The one you receive will look similar to the one pictured, above average with no major issues. Original GM part number 490253, the real deal!

PART NUMBER: SHE-2723
1974 - 1976 Hood Latch Release Handle, Used GM
1974 - 1976 Hood Latch Release Handle, Used GM
Our Price: $60.00

Correct original GM hood release handle for your bird. Exact fit for all 74 - 76 Firebird and Trans Am models. Currently available as a used GM item only. The one you receive will look similar to the one pictured, above average with no major issues. The real deal!

PART NUMBER: SHE-2724H
1974 - 1976 Radiator Support Hood Latch Brace, Used GM
1974 - 1976 Radiator Support Hood Latch Brace, Used GM
Our Price: $100.00

Correct original GM radiator support to valance / hood latch release brace. Exact fit for all 74 - 76 Firebird and Trans Am models. Currently available as a used GM item only. The one you receive will look similar to the one pictured, above average with no major issues. Original GM part numbers 499031 / 497803 / 526659 the real deal!
PART NUMBER: SHE-2724
1974 - 1976 Radiator Support Hood Latch Brace, Used GM
1974 - 1976 Radiator Support Hood Release Side Extension Brace, Used GM
Our Price: $40.00

Correct original GM radiator support to valance, upper hood latch release side extension brace. Exact fit for all 74 - 76 Firebird and Trans Am models. Currently available as a used GM item only. The one you receive will look similar to the one pictured, above average with no major issues. Original GM part number 492951 the real deal!

Note - Pictured installed on the radiator brace just for your reference

PART NUMBER: SHE-2724C
1977 - 1981 Firebird Standard Flat Hood
Our Price: $389.95

New factory style Firebird standard flat hood. This all steel hood is a direct replacement for the original 1977-1981 Firebird standard hood. Perfect fit and details along with a great price makes it easy to choose this hood.  Works great for all 77-81 firebird models.

Part Number: SHE-2571
1977 - 1981 Firebird Trans Am Shaker Hood Scoop Drain Hose Nipple
1977 - 1981 Firebird Trans Am Shaker Hood Scoop Drain Hose Nipple
Our Price: $15.95

New factory style Trans Am and Firebird shaker hood drain hose nipple.  Correct T/A shaker hood scoop drain hose nipple.  Installs on the drivers side forward corner of your shaker hood scoop base.  Molded hose slides right on to this fitting.  Fits all 77 - 81 Trans Am models.

Years: 1977 1978 1979 1980 1981

PART NUMBER: SHE-2575
1977 - 1981 Firebird Trans Am Shaker Hood Scoop Molded Rubber Drain Hose
1977 - 1981 Firebird Trans Am Shaker Hood Scoop Molded Rubber Drain Hose
Our Price: $14.95

New factory style Trans Am and Firebird shaker hood drain hose.  Correct molded T/A shaker hood scoop drain hose with correct hose clamp.  Runs from the base of shaker hood scoop in front of water pump.  Correct molded bends like original.  Fits all 77 - 81 Trans Am models.

Years: 1977 1978 1979 1980 1981

PART NUMBER: SHE-2572
1977 - 1981 Hood Insulation Pad
1977 - 1981 Hood Insulation Pad
Our Price: $29.95

New hood insulation pad for your firebird. Exact fit for all 77 - 81 models (except Trans Ams). Dye cut one inch thick, non-molded.

Part Number: SHE-2022
1977 - 1981 Hood Insulation Pad for Shaker Hood
1977 - 1981 Hood Insulation Pad for Shaker Hood
Our Price: $39.95

New hood insulation pad for your bird. Exact fit for all 77 - 81 models with the shaker hood. Each hood insulation is manufactured in a heat resistant material which will help to extend the life span of the paint on your hood and helps the heat dissipation of your engine compartment. OE style material look and feel, 1 inch thick.

Part Number: SHE-2022A
1977 - 1981 Radiator Support Hood Latch Brace, Used GM
1977 - 1981 Radiator Support Hood Latch Brace, Used GM
Our Price: $100.00

Correct original GM radiator support to valance / hood latch release brace. Exact fit for all 77 - 81 Firebird and Trans Am models. Currently available as a used GM item only. The one you receive will look similar to the one pictured, above average with no major issues. Original GM part number 10005214 the real deal!

PART NUMBER: SHE-2722
1977 - 1981 Trans Am Complete Shaker Hood Scoop Kit, 400 Engines
Our Price: $349.95
Sale Price: $329.95
You save $20.00!

New factory style 1977 - 1981 Trans Am and Firebird Complete Shaker Hood Scoop Kit.  This is a direct replacement for the original 1977 - 1981 Trans Am and Firebird shaker hood scoop.  Perfect fit and details along with a great price makes it easy to choose this hood scoop.  This is the only complete shaker hood scoop that comes with the correct metal mounting plate underneath the scoop and retaining ring.  Works great for all 77 - 81 firebird models with Pontiac 400 engines.  Fits all 77, 78, 79, 80, and 81 Trans Am Models.  ORDER YOURS TODAY & SAVE!!

Part Number: SHE-2574
1977 - 1981 Trans Am Functional Flapper Shaker Hood Scoop Conversion Kit for Pontiac Engines
Our Price: $154.95

This is an amazing new kit that wires directly to your fuse box on the ignition side.  This allows the shaker hood scoop flab to open like original 1970 - 1972 shaker hood scoops.  With this new kit you can allow air to flow in for improved performance and close to keep outside elements out of your 77 -81 Trans Am.  Designed with an electric solenoid for 12V current to improve durability.  This is an easy do-it-yourself kit  that wires directly to your fuse box so the flap opens when the engine is started.  Each kit comes complete with a detailed instruction manual with pictures and text.  You must use your original hood scoop or buy a new one, hood scoop is not included in this great kit.

*You can choose to add a Kick Down Switch and bracket to have the flap activated when stepping hard on the accelerator.  
**Fits ALL 1977 1978 1979 1980 1981  models with pontiac engines.  
**Will NOT fit the early production short 1977 hood scoops.

Part Number: SHE-2538
1977 - 1981 Trans Am Functional Shaker Hood Scoop Conversion Kit for 403 Olds
Our Price: $154.95

This is an amazing new kit that wires directly to your fuse box on the ignition side.  This allows the rear of your shaker hood scoop flab to open like original 1970 - 1972 shaker hood scoops.  With this new kit you can allow air to flow in for improved performance and close to keep outside elements out of your 77 -81 Trans Am.  Designed with an electric solenoid for 12V current to improve durability.  This is an easy do-it-yourself kit  that wires directly to your fuse box so the flap opens when the engine is started.  Each kit comes complete with a detailed instruction manual with pictures and text.  You must use your original hood scoop or buy a new one, hood scoop is not included in this great kit.

*You can choose to add a Kick Down Switch and bracket to have the flap activated when stepping hard on the accelerator.  
**Fits ALL 1977 1978 1979 1980 1981  models with the 403 Oldsmobile engine.  
**Will not fit the early production short 1977 hood scoops.  

Part Number: SHE-2539
1977 - 1981 Trans Am Shaker Hood - Steel OE Style
Our Price: $429.95

New factory style 1977-1981 Trans Am and Firebird shaker hood.  This all steel hood is a direct replacement for the original 1977-1981 Trans Am and Firebird shaker hood.  Perfect fit and details along with a great price makes it easy to choose this hood.  Works great for all 77-81 firebird models.


Part Number: SHE-2570
1977 - 1981 Trans Am Shaker Hood Scoop Rear Flapper Assembly
Our Price: $54.95

Replace your original Shaker Hood Block Off Plate with this functional flapper.  This flapper kit with allow fresh air to flow into the shaker hood scoop when the carburetor pressure is high or you are running at high speeds.  This flap is only activated by pressure.  The pressure produced by the carburetor will open the flap and close once the gas pedal is release.  Order this amazing flapper kit today

*Fits all 1977 - 1981 Trans Am shaker hood scoops, will NOT fit the early production short 77 hood scoop.

Part Number: SHE-2540B
1977 Trans Am Shaker Scoop, Low Profile with (2) 1/4" Spacers
1977 Trans Am Shaker Hood Scoop Rivet Bolt Set - 8 Pieces
Our Price: $15.95

Original style rivet head bolt and nut set.  You do not have to worry about having a rivet gun with this rivet bolt set.  Superior detail given.  These are the correct looking rivets to mount your hood scoop to the lower metal bracing.  Made in the USA.

PART NUMBER: SHE-2534
1977 Trans Am Shaker Scoop, Low Profile with (2) 1/4" Spacers
1977 Trans Am Shaker Hood Scoop, Low Profile with (2) 1/4" Spacers
Our Price: $129.95

New hood scoop for your Trans Am. Fits all 77 models with a Pontiac engine. This is the upper hood scoop itself. Does not include the inner steel piece that attaches to your air cleaner base. The steel bottom is bolted to the scoop, so switching them out is simple. White gel-coat on underside just like original. Superior detail and made in the USA!

PART NUMBER: SHE-2533A
1977-1978 Firebird Hood Latch Catch Release Cable Bracket, Used GM
1977-1978 Firebird Hood Latch Catch Release Cable Bracket, Used GM
Our Price: $75.00

Correct hood latch release bracket for your bird. Exact fit for all 77 - 78 firebird and trans am models. This is the lower bracket that mounts onto your front nose bumper area. Currently available as a GM used item only.  

**Note ~ Pictured with cable for your reference only.

Part Number: SHE-2529C
1977-1981 Hood Latch Catch Release Cable Clip
1977-1981 Hood Latch Catch Release Cable " U " Clip
Our Price: $3.95

Brand new correct size hood release cable clip.  Fits all 77-81 models; firebird, formula, or trans am.  Installs at the handle end on your lower cable support bracket.

Part Number: SHE-2529H
1977-1981 Hood Latch Catch Release Cable Assembly - OE Style
1977-1981 Hood Latch Catch Release Cable Assembly - OE Style
Our Price: $59.95

Brand new correct design hood release cable.  Fits all 77-81 models; firebird, formula, or trans am.  

* Note ~ Can modify to work for 1973 models.

Part Number: SHE-2529
1977-1981 Hood Latch Catch Release Cable Upper Slide Clip
1977-1981 Hood Latch Catch Release Cable Upper Slide Clip
Our Price: $20.00

Correct square slide clip for your hood release cable. Exact fit for all 77 - 81 models; Firebird, Formula, or Trans Am. Installs at the radiator support hood latch brace near the top. Your cable installs into this clip then you slide onto the brace. Shown installed for your reference. Currently available as a GM used item only.
Part Number: SHE-2529J
1977-1981 Trans Am Shaker Hood Scoop 403
1977-1981 Trans Am Shaker Hood Scoop 403
Our Price: $249.95

Trans Am Shaker Hood Scoop for 77-81 models with 403 Oldsmobile engines.  Bolt on to your air box using all stock hardware!  All stock configrations replace that broken one with a new fiberglass shaker.  Has all the detail as OEM.  Just sand, prime, and paint.

Part Number: SHE-2530
1977-1981 Trans Am Shaker Hood Scoop for Pontiac Engines
1977-1981 Trans Am Shaker Hood Scoop for Pontiac Engines
Our Price: $249.95

Trans Am Shaker Hood Scoop for 77-81 models with Pontiac engines...350, 400, 455, etc..  Bolt on to your air box using all stock hardware!  All stock configrations replace that broken one with a new fiberglass shaker.  Has all the detail as OEM.  Just sand, prime, and paint.

Part Number: SHE-2530A
1977-1981 Trans Am Shaker Scoop to Hood Rubber Seal
1977-1981 Trans Am Shaker Scoop to Hood Rubber Seal
Our Price: $39.95

Shaker scoop to hood seal for 1977-1981 Trans Am models.  Manufactured to exact specifications offering an authentic replacement.  Includes correct molded clips.

Part Number: WEA-2006
1978 - 1981 Trans Am Shaker Scoop (400 cid, 403 cid, 301 cid Non_Turbo)
1978 - 1981 Trans Am Shaker Hood Scoop (400 cid, 403 cid, 301 cid Non_Turbo)
Our Price: $119.95

New hood scoop for your Trans Am. Fits all 301 (non turbo ) / 400 / 403 engines. This is the upper hood scoop itself. Does not include the inner steel piece that attaches to your air cleaner base. The steel bottom is bolted to the scoop, so switching them out is simple. White gel-coat on underside just like original. Superior detail and made in the USA!

PART NUMBER: SHE-2533C
1978-1981 Trans Am Shaker Hood Scoop Rivet Bolt Set
1978-1981 Trans Am Shaker Hood Scoop Rivet Bolt Set - 8 Pieces
Our Price: $9.95

Original style rivet head bolt and nut set.  You do not have to worry about having a rivet gun with this rivet bolt set.  Superior detail given.  These are the correct looking rivets to mount your hood scoop to the lower scoop metal bracing.  Includes 8 pieces, does one hood scoop.  Made in the USA.

PART NUMBER: SHE-2535
1979 - 1981 Hood Latch Catch Release Handle Cable Bracket - Used GM
1979 - 1981 Hood Latch Catch Release Handle Cable Bracket - Used GM
Our Price: $55.00

Nice hood latch release bracket for your bird.  Exact fit for all 79 - 81 Firebird and Trans Am models.  This is the bracket that mounts to your bumper cover and secures the hood release cable.  The one you will receive will look similar to the one pictured, above average with no major issues.  The hood release cable is not included, just pictured for reference.  Original GM part number stamped 10004725 .

Part Number: SHE-2529F
1980 - 1981 Trans Am Shaker Scoop (305  cid)
1980 - 1981 Trans Am Shaker Hood Scoop (305 cid)
Our Price: $119.95

New hood scoop for your Trans Am. Fits all 80 - 81 models with a 305 engine. This is the upper hood scoop itself. Does not include the inner steel piece that attaches to your air cleaner base. The steel bottom is bolted to the scoop, so switching them out is simple. White gel-coat on underside just like original. Superior detail and made in the USA!

PART NUMBER: SHE-2533E
1982 - 1983 Firebird Hood Insulation, Crossfire Injection / Air Induction
Our Price: $29.95

New hood insulation for 82 - 83 Firebird models with Crossfire / Air Induction.  Correct Diamond Cut Out and 1/2" thick.  Each hood insulation is manufactured in a heat resistant material which will help to extend the life span of the paint on your hood and helps the heat dissipation of your engine compartment.

Note: This hood insulation does not include moutning clips.

Part Number: SHE-2045
1982 - 1992 Hood Insulation, Flat for Firebird and Trans Am
1982 - 1992 Hood Insulation, Firebird / Trans Am
Our Price: $29.99

New hood insulation pad for your 82 - 92 Firebird and Trans Am models.  Manufactured from a heat resistant material which will help to extend the life span of the paint on your hood and helps the heat dissipation of your engine compartment.  

Exact fit for all;
*85 - 92 Firebirds
*87 - 92 Formula
*82 - 92 Trans Am

Note: This hood insulation does not include mounting clips.

Part Number: SHE-2044
1982 - 1992 Hood Insulation, Standard Hood ~ ( Not Trans Am )
Our Price: $29.95

New hood insulation pad for your bird. Exact fit for all 82 - 92 standard Firebird models. Each hood insulation is manufactured in a heat resistant material which will help to extend the life span of the paint on your hood and helps the heat dissipation of your engine compartment. OE style material look and feel, 1/2 inch thick.

Note: This hood insulation does not include the mounting clips.

Part Number: SHE-2042
1982-1992 Hood Lift Shock Absorber
1982 - 1992 Hood Lift Support Shock Absorber, Each
Our Price: $24.95

New hood lift shock absorber for your Firebird. Exact fit for all 82 - 92 models, except if you have a fiberglass hood. Awesome quality at an awesome price. Manufactured to automotive O.E. performance and quality specifications. Restores the original opening and closing speeds of your hood. Easy to install. No special tools required. Exact replacement, engineered for your application. Rust-resistant piston rod extends product life. Easy lifting, reduced closing effort. Consistent lifting force through 50,000 cycles Two required per car, sold as each.

Part Number: SHE-1034
1982 - 1992 Hood Release Cable and Handle Assembly
Our Price: $50.95

Brand New Hood Release Cable for all 82 -92 Firebird models. Cable is complete with housing and interior handle. Firewall grommet is pre-installed on cable housing for a fast installation.

PART NUMBER SHE-890
1982 - 1992 Hood Side Rubber Bumper Stoppers ( 4 Piece Set )
1982 - 1992 Hood Side Rubber Bumper Stoppers ( 4 Piece Set )
Our Price: $11.95

New rubber hood side stop kit for all 82 - 92 Firebird models. Complete 4 piece kit for one car.  Don't leave it unprotected!  Order yours today.

Replaces Discontinued GM Part Number 10017997

PART NUMBER: WEA-43
1982-1992 Fenders, Core Support, & Hood Hardware Kit - Stainless
Our Price: $19.95

New front end hardware set for your bird.  Exact fit for all 82 - 92 firebird and trans am models.  Does both fenders, radiator core support, and hood bolts.  Stainless steel hex head bolts that are not indented.

Part Number: HWR-633
1982-1992 Hood Adjust Rubber Bump Stopper
Our Price: $4.95

Correct adjust bumper at your radiator core support.  Two required per car.  Sold each.

PART NUMBER: WEA-46
1982-1992 Hood Hinge LH
Our Price: $69.95

Hood Hinge LH 82-92.

Part Number: SHE-119
1982-1992 Hood Hinge RH
Our Price: $69.95

RH hood hinge.

Part Number: SHE-120
1982-1992 Hood latch assembly
Our Price: $44.95

NEW! 82-92 Hood latch assembly

Part Number: SHE-886
1982-1992 Hood Lift Shock Absorber
1982-1992 Hood Lift Shock Absorber
Our Price: $39.95

Hood lift shock absorber for 82-92 models.  Made in the USA!

Part Number: SHE-1035
1993 - 1997 Firebird Trans Am Hood Insulation, GM NOS
1993 - 1997 Firebird and Trans Am Hood Insulation, GM NOS
Our Price: $299.99

Rare original GM hood insulation for your bird.  Exact fit for all 93 - 97 Firebird and Trans Am.  Can modify for functional ram air cars if needed.  Still in the factory GM box, never opened.  You be the first!

PART NUMBER: 10273236
1993 - 2002 Hood Adjust Radiator Core Support Rubber Bumper Stopper
Our Price: $6.95

Correct adjust bumper at your radiator core support for all 93 - 02 Firebird models. Two required per car. Sold each.

Fits all 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001 and 2002 Camaro and Firebird Models

PART NUMBER: WEA-46
1993 - 2002 Hood Release Cable and Handle Assembly
Our Price: $54.95

Brand New Hood Release Cable for all 93 -2002 Firebird models. Cable is complete with housing and interior handle. Firewall grommet is pre-installed on cable housing for a fast installation.

PART NUMBER SHE-890B
1998-2002 Hood Hinge LH
Our Price: $27.95

Original GM hood hinge for 98-02 Firebirds.  Original hood hinges can bend or become damaged.  To keep your hood in alignment and prevent paint damage on your hood and fenders, bent hinges should be replaced.  Left hand drivers side.  Sold each.

Part Number: SHE-2047
1998-2002 Hood Hinge RH
Our Price: $27.95

Original GM hood hinge for 98-02 Firebirds.  Original hood hinges can bend or become damaged.  To keep your hood in alignment and prevent paint damage on your hood and fenders, bent hinges should be replaced.  Right hand passengers side.  Sold each.

Part Number: SHE-2048
Correct OE Style Round Hood Insulation Clips - 20 Piece Set
Correct OE Style Round Hood Insulation Clips - 20 Piece Set
Our Price: $19.95

New correct set of original style hood insulation clips for your firebird.  Comes in a complete set of 20 pieces.  Imported hoods have just slightly larger diameter clip holes than factory original GM hoods. We've re-tooled our clip, slightly enlarging the stud for a more snug fit. Now works perfectly with all the different versions hoods. Replaces GM part number # 3909199 perfectly.  Correct injection molded in black as original.

Part Number: SHE-97
Hood Insulation Clip Replacement Style
Our Price: $1.95

New replacement style hood insulation clip for your Firebird.  Sold as each.

Part Number: SHE-98
Hood Pin Safety Kit
Our Price: $39.95

NEW, Old school style hood pin safety kit!
Brand new complete kit includes: correct stainless steel pins,
braided cable set, OE Style hitch pins, polished stainless flat
washers with gaskets. All mounting nuts and screws. Show car
ready! Premium Quality

Part Number: SHE-944