|
|
|
|
|
|
1967 - 1968 Firebird Upper Alternator Brace at Timing Cover Water Pump Housing
|
|
Our Price: $19.95
|
|
|
New correct design alternator brace for your bird. This is the one that mounts on to your water pump. Fits all 67 - 68 models with V8 engines; 326, 400, 455, etc..
NOTE: If you need both alternator brackets, check out our part number ENC-2046A.
PART NUMBER: ENC-2046E
|
|
|
|
|
|
|
|
|
|
1967 - 1969 Alternator Mounting Bracket at Thermostat Housing Stud
|
|
Our Price: $19.95
|
|
|
New correct design alternator bracket for your 67 - 69 bird. Exact fit for all firebird and trans am models. This is the one that mounts on your thermostat housing ( water neck ) stud.
PART NUMBER: ENC-2200
|
|
|
|
|
|
|
|
|
|
1967 - 1969 Alternator Pivot Check Bracket - With Power Steering
|
|
Our Price: $14.95
|
|
|
Correct for all 67 - 69 firebird and trans am models with power steering. Mounts behind your P/S pulley to the power steering cradle bracket and alternator.
PART NUMBER: ENC-2046C
|
|
|
|
|
|
|
|
|
|
1967 - 1974 Firebird Starter Solenoid Wire Harness Retainer Clip
|
|
Our Price: $24.95
|
|
|
Clip holds wire harness and clamps around starter correct reproduction. Made in the USA!
PART NUMBER: ALT-60
|
|
|
|
|
|
|
|
|
|
1967-1968 Alternator Bracket Set, 2 Pieces
|
|
Our Price: $39.95
|
|
|
New alternator bracket set for 67-68 Firebird. 2 pieces.
PART NUMBER: ENC-2046A
|
|
|
|
|
|
|
|
|
|
1967-1969 Battery Tray Hold Down Clamp - Stamped Steel - USA
|
|
Our Price: $4.95
|
|
|
New correct size battery tray hold down clamp for your firebird. Exact fit for all 67-81 models. Helps keep your battery stationary. Stamped steel construction and OE details. Made in the USA!
Part Number: BAT-83
|
|
|
|
|
|
|
|
|
|
1967-1972 Battery Cable Retainer Clip
|
|
Our Price: $14.95
|
|
|
1967-1972 battery cable retainer clip with rivet.
Part Number: ALT-10
|
|
|
|
|
|
|
|
|
|
1967-1974 Starter Bracket
|
|
Our Price: $19.95
|
|
|
We now have the factory starter reinforcement bracket used on all 1967-74 326 / 389 / 350 / 400 / 455 motors in Firebird / Trans Am models.
Part Number: ENC-2041
|
|
|
|
|
|
|
|
|
|
1967-1979 Engine Block 4 Bolt Main Caps Pontiac - Set of Three
|
|
Our Price: $289.95
|
|
|
New OEM style, cast steel ( four ) 4-bolt main caps. Exact fit for all 326 , 350 , 389 , and 400 , pontiac engines. Must use your original #1 and #5 to complete the set. Block align boring maybe necessary.
*Original " GM " and part numbers are stamped;
# 2 = 9796622
# 3 = 9796623
# 4 = 9796624
Part Number: ENC-2043
|
|
|
|
|
|
|
|
|
|
1967-1981 Battery Mount Optima Battery, Natural Finish
|
|
Our Price: $115.00
|
|
|
This CNC machined aluminum battery mount is designed around the Optima battery. It is a simple, strong, and good looking way to hold your Optima battery anywhere. The entire battery mount is machined from 6061 billet aluminum. Three countersunk stainless steel bolts secure the top of the battery mount to the support rods. The base of the mount is mounted to your vehicle with no visible bolts from the top. There are 6 drilled and tapped holes on the underside of the base. Although fewer attachment locations will securely mount your battery, we provide 6 mounting holes to give you added flexibility. We provide a mounting hole template that will assist you in locating the holes. The dimensions of the battery mount are 11 1/2" X 8 1/2" X 7 1/2" tall.
PART NUMBER: BAT-91N
|
|
|
|
|
|
|
|
|
|
1967-1981 Battery Mount Optima Battery, Polished Finish
|
|
Our Price: $150.00
|
|
|
This CNC machined aluminum battery mount is designed around the Optima battery. It is a simple, strong, and good looking way to hold your Optima battery anywhere. The entire battery mount is machined from 6061 billet aluminum. Three countersunk stainless steel bolts secure the top of the battery mount to the support rods. The base of the mount is mounted to your vehicle with no visible bolts from the top. There are 6 drilled and tapped holes on the underside of the base. Although fewer attachment locations will securely mount your battery, we provide 6 mounting holes to give you added flexibility. We provide a mounting hole template that will assist you in locating the holes. The dimensions of the battery mount are 11 1/2" X 8 1/2" X 7 1/2" tall.
PART NUMBER: BAT-91P
|
|
|
|
|
|
|
|
|
|
1968-1969 Exhaust Manifold Pre - Heat Shield
|
|
Our Price: $79.95
|
|
|
Factory style Pontiac exhaust manifold heat shield. Comes silver cadium plated just like factory units. Fits all models except Ram Air IV.
Part Number: ENC-2042
|
|
|
|
|
|
|
|
|
|
1969 Alternator Bracket Set, 2 Pieces
|
|
Our Price: $38.95
|
|
|
New alternator bracket set for 69 Firebird. 2 pieces.
PART NUMBER: ENC-2200K
|
|
|
|
|
|
|
|
|
|
1969 Upper Alternator Brace at Timing Cover Water Pump Housing
|
|
Our Price: $19.95
|
|
|
New correct alternator brace for your Firebird. This is the one that mounts onto your water pump. Fits all 69 models V8 engine; 350, 400, 455, etc.
*NOTE if you need both alternator brackets check out our part number ~ ENC-2200K
PART NUMBER: ENC-2046
|
|
|
|
|
|
|
|
|
|
1970 Alternator Mounting Bracket Set
|
|
Our Price: $109.95
|
|
|
New, one year only alternator bracket set for your bird. Fits all 1970 Pontiac Firebird and Trans Am moedls. This set includes both correct brackets. Used on all 350 / 400 / 455 engines with power steering. This two piece bracket set was impossible to find, but now firebird central has made it easy. Replaces GM # 480515 and # 480517
PART NUMBER: ENC-2046B
|
|
|
|
|
|
|
|
|
|
1970 Alternator Rear Mounting Adjust / Support Bracket
|
|
Our Price: $45.95
|
|
|
New, one year only rear alternator support bracket for your bird. Fits all 1970 Pontiac Firebird and Trans Am models with V8 engines. Mounts onto the back side of your alternator and then the intake manifold. Used on all 350 and 400 engines. This bracket is almost impossible to find, but now firebird central has made it easy.
PART NUMBER: ENC-2045
|
|
|
|
|
|
|
|
|
|
1970-1976 Battery Tray Kit
|
|
Our Price: $54.95
|
|
|
New complete battery tray kit for your firebird. Exact fit for all 70-76 models. 8 piece set, Great kit!
Kit includes:
- Battery tray
- Battery tray hold down clamp brace
- Battery tray hold down long bolt
- Battery tray mounting bolt set
- Battery tray protective mat
Part Number: BAT-2002K
|
|
|
|
|
|
|
|
|
|
1970-1979 Engine Starter Brace - 400 or 455 Engines
|
|
Our Price: $17.95
|
|
|
This new factory style starter brace fits 1970 - 1979 Pontiac Firebird and Trans Am with 400 or 455 engines.
PART NUMBER: ENC-2041A
|
|
|
|
|
|
|
|
|
|
1970-1981 Battery Tray Hold Down Long Bolt
|
|
Our Price: $6.95
|
|
|
New correct style battery securing long bolt. Fits all 70-81 models.
PART NUMBER: BAT-2005
|
|
|
|
|
|
|
|
|
|
1977-1981 Battery Tray Kit
|
|
Our Price: $54.95
|
|
|
New complete battery tray kit for your firebird. Exact fit for all 77-81 models. 8 piece set, Great kit!
Kit includes:
- Battery tray
- Battery tray hold down clamp brace
- Battery tray hold down long bolt
- Battery tray mounting bolt set
- Battery tray protective mat
Part Number: BAT-2002KA
|
|
|
|
|
|
|
|
|
|
1982-2002 Battery Tray Hold Down Clamp Bolt
|
|
Our Price: $3.95
|
|
|
New correct design long bolt to mount your clamp.
Part Number: BAT-2004
|
|
|
|
|
|
|
|
|
|
1993-2002 Battery Tray and Coolant Overflow Recovery Tank Bottle Jar
|
|
Our Price: $54.95
|
|
|
New correct design battery tray and coolant tank combo. Includes coolant over flow reservoir. Exact fit for all 93 - 02 Firebird models.
PART NUMBER: BAT-11
|
|
|
|
|
|
|
|
|
|
Battery Cable Support and Routing Clip
|
|
Our Price: $5.95
|
|
|
New correct design clip for your Firebird. Some cars had up to four of these clips; two on the oil pan, one on an engine mount, etc.. A great detail item, that helps keep your battery cable secure. Two (2) required per car. Sold each.
Part Number: ENC-25
|
|
|
|
