You are here:Home > Custom Parts
Choose a sub category:
Billet Parts Custom Dash Housings
Custom Floor Mats
Sort By:
Page of 1
"454" Custom Emblems
"454" Custom Emblems
Our Price: $59.95

"454" emblems in red.  Will work for all model years.  Sold as a pair.  Studs on the back are designed for 69 fender location, but you can mount anywhere you like.

Part Number: EMB-156
"502" Engine Size Custom Emblems in Red
Our Price: $59.95

New custom "502" emblems in red.  These will look great on your fender or anywhere you like.  Sold in a matched pair.

Part Number: EMB-157
1156 Ultra Bright LED Back Up Light Bulb ( White )
1156 Ultra Bright LED Back Up Light Bulb ( White )
Our Price: $19.95

This new LED bulb has 14 LEDs with 3 chips per bulb.  Super Brightness: The luminance is 2 to 3 times stronger than traditional LED bulb.  Replaces any standard 1156 bulb.  This bulb will replace the standard backup bulbs.  Sold each, order yours today!!  

Single Filament Bulb

PART NUMBER: LIG-999
1157 Ultra Bright  LED Light Bulb
1157 Ultra Bright LED Light Bulb ( Amber )
Our Price: $19.95

This new LED bulb has 14 LEDs with 3 chips per bulb.  Super Brightness: The luminance is 2 to 3 times stronger than traditional LED bulb.  Replaces any standard 1157A bulb.  This bulb will replace the stop and turn tail light bulbs and the front park light / turn signal bulbs.  Sold each, order yours today!!  

Dual Filament Bulb

PART NUMBER: LIG-901
1157 Ultra Bright  LED Light Bulb
1157 Ultra Bright LED Light Bulb ( White )
Our Price: $19.95

This new LED bulb has 14 LEDs with 3 chips per bulb.  Super Brightness: The luminance is 2 to 3 times stronger than traditional LED bulb.  Replaces any standard 1157 bulb.  This bulb will replace the stop and turn tail light bulbs and the front park light / turn signal bulbs.  Sold each, order yours today!!  

Dual Filament Bulb

PART NUMBER: LIG-900
1967 - 1968 Dash Instrument Cluster Housing with Black Gauges, Custom OE Style
Our Price: $999.95

New complete custom dash kit for your 67-68 Firebird model. Includes speedometer, 8K tachometer, fuel, oil, amp, and temp gauges. Gauges are wired and come with sending units for installation. Features black face, with white lettering, and white needles. Includes turn signal LEDs and high beam LED lights. Speedtacular and Quad cluster 0-90 ohm fuel (stock ohm range for 67-68). 140 MPH speedo!! Gauges are pre-mounted in the correct factory style dash housing.

Note: Fuel sending unit not included.

PART NUMBER: DAS-523
1967 - 1968 Dash Instrument Cluster Housing with Gauges (All American Nickel), Custom OE Style
1967 - 1968 Dash Instrument Cluster Housing with Gauges (All American Nickel), Custom OE Style
Our Price: $1,139.95

New complete custom dash kit for your 67 - 68 Firebird model. Includes speedometer, 8K tachometer, fuel, oil, amp, and temp gauges. Gauges are wired and come with sending units for installation. The All American Nickel Series will bridge the gap between past and present. These gauges are a functioning work of art with a classic off-white face, orange needle and a graphic layout that will never be out dated. Includes turn signal leds and high beam led lights. Speedtachular and Quad cluster 0-90 ohm fuel (stock ohm range for 67-68). Gauges are pre-mounted in the correct factory style dash housing.

Note: Fuel sending unit not included.

PART NUMBER: DAS-529
1967 - 1968 Dash Instrument Cluster Housing with Gauges (All American Series), Custom OE Style
1967 - 1968 Dash Instrument Cluster Housing with Gauges (All American Series), Custom OE Style
Our Price: $1,139.95

New complete custom dash kit for your 67 - 68 Firebird model. Includes speedometer, 8K tachometer, fuel, oil, amp, and temp gauges. Gauges are wired and come with sending units for installation. The All American Series will bridge the gap between past and present. These gauges are a functioning work of art with a classic 2 tone silver & grey face, black needle and a graphic layout that will never be out dated. Includes turn signal leds and high beam led lights. Speedtachular and Quad cluster 0-90 ohm fuel (stock ohm range for 67-68). Gauges are pre-mounted in the correct factory style dash housing.

Note: Fuel sending unit not included.

PART NUMBER: DAS-531
1967 - 1968 Dash Instrument Cluster Housing with Gauges (All American Tradition), Custom OE Style
1967 - 1968 Dash Instrument Cluster Housing with Gauges (All American Tradition), Custom OE Style
Our Price: $1,139.95

New complete custom dash kit for your 67 - 68 Firebird model. Includes speedometer, 8K tachometer, fuel, oil, amp, and temp gauges. Gauges are wired and come with sending units for installation. The All American Tradition Series will bridge the gap between past and present. These gauges are a functioning work of art with a classic black face, white needle and a graphic layout that will never be out dated. Includes turn signal leds and high beam led lights. Speedtachular and Quad cluster 0-90 ohm fuel (stock ohm range for 67-68). Gauges are pre-mounted in the correct factory style dash housing.

Note: Fuel sending unit not included.

PART NUMBER: DAS-530
1967 - 1968 Dash Instrument Cluster Housing with Gauges (Autocross Series), Grey, Custom OE Style
1967 - 1968 Dash Instrument Cluster Housing with Gauges (Autocross Series), Grey, Custom OE Style
Our Price: $1,139.95

New complete custom dash kit for your 67 - 68 Firebird model. Includes speedometer, 10K tachometer, fuel, oil, amp, and temp gauges. Gauges are wired and come with sending units for installation. The Autocross Series is an all new gauge style for the popular and growing autocross enthusiast. These gauges are a really cool looking hardcore style for the all out autocross Camaro, black face, white needle and grey graphic layout that will keep you staring . Includes LED shift light, LED turn signals and LED high beam indicator. Speedtachular and Quad cluster 0-90 ohm fuel (stock ohm range for 67-68). Gauges are pre-mounted in the correct factory style dash housing.

Note: Fuel sending unit not included.

PART NUMBER: DAS-532
1967 - 1968 Dash Instrument Cluster Housing with Gauges (Autocross Series), Yellow, Custom OE Style
1967 - 1968 Dash Instrument Cluster Housing with Gauges (Autocross Series), Yellow, Custom OE Style
Our Price: $1,139.95

New complete custom dash kit for your 67 - 68 Firebird model. Includes speedometer, 10K tachometer, fuel, oil, amp, and temp gauges. Gauges are wired and come with sending units for installation. The Autocross Series is an all new gauge style for the popular and growing autocross enthusiast. These gauges are a really cool looking hardcore style for the all out autocross Camaro, black face, white needle and yellow graphic layout that will keep you staring . Includes LED shift light, LED turn signals and LED high beam indicator. Speedtachular and Quad cluster 0-90 ohm fuel (stock ohm range for 67-68). Gauges are pre-mounted in the correct factory style dash housing.

Note: Fuel sending unit not included.

PART NUMBER: DAS-533
1967 - 1968 Dash Instrument Cluster Housing with Gauges (Classic White), Custom OE Style
1967 - 1968 Dash Instrument Cluster Housing with Gauges (Classic White), Custom OE Style
Our Price: $1,129.95
Sale Price: $999.95
You save $130.00!

New complete custom dash kit for your 67 - 68 Firebird model. Includes speedometer, 8K tachometer, fuel, oil, amp, and temp gauges. Gauges are wired and come with sending units for installation. This is the timeless styling Classic White Series version which features black numbering, black needles and a classic script design. Includes turn signal leds and high beam led lights. Speedtachular and Quad cluster 0-90 ohm fuel (stock ohm range for 67-68). Gauges are pre-mounted in the correct factory style dash housing.

Note: Fuel sending unit not included.

PART NUMBER: DAS-520
1967-1968 Custom Dash Gauge Set with OE Housing
1967 - 1968 Dash Instrument Cluster Housing with Gauges (G-Stock), Custom OE Style
Our Price: $999.95

New complete custom dash kit for your 67-68 Firebird model.  Includes speedometer, 8K tachometer, fuel, oil, amp, and temp gauges.  Gauges are wired and come with sending units for installation.  This is the old style G/Stock Series version which features aqua green numbering and orange needles.  Includes turn signal leds and high beam led lights.  Speedtachular and Quad cluster 0-90 ohm fuel (stock ohm range for 67-68).  Gauges are pre-mounted in the correct factory style dash housing.

Part Number: DAS-521
1967 - 1968 Dash Instrument Cluster Housing with Gauges (SG Series), Custom OE Style
1967 - 1968 Dash Instrument Cluster Housing with Gauges (SG Series), Custom OE Style
Our Price: $1,129.95
Sale Price: $999.95
You save $130.00!

New complete custom dash kit for your 67 - 68 Firebird model. Includes speedometer, 8K tachometer, fuel, oil, amp, and temp gauges. Gauges are wired and come with sending units for installation. The SG Series will give your dash a bold statement with a grey face, white needle and a clean graphic layout. Includes turn signal leds and high beam led lights. Speedtachular and Quad cluster 0-90 ohm fuel (stock ohm range for 67-68). Gauges are pre-mounted in the correct factory style dash housing.

Note: Fuel sending unit not included.

PART NUMBER: DAS-524
1967 - 1968 Dash Instrument Cluster Housing with Gauges (Traditional), Custom OE Style
1967 - 1968 Dash Instrument Cluster Housing with Gauges (Traditional), Custom OE Style
Our Price: $1,129.95
Sale Price: $999.95
You save $130.00!

New complete custom dash kit for your 67 - 68 Firebird model. Includes speedometer, 8K tachometer, fuel, oil, amp, and temp gauges. Gauges are wired and come with sending units for installation. This is the timeless styling Traditional Series version which features black face, white numbering, white needles and a classic script design. Includes turn signal leds and high beam led lights. Speedtachular and Quad cluster 0-90 ohm fuel (stock ohm range for 67-68). Gauges are pre-mounted in the correct factory style dash housing.

Note: Fuel sending unit not included.

PART NUMBER: DAS-525
1967 - 1968 Dash Instrument Cluster Housing with Gauges (Velocity Black), Custom OE Style
1967 - 1968 Dash Instrument Cluster Housing with Gauges (Velocity Black), Custom OE Style
Our Price: $1,129.95
Sale Price: $999.95
You save $130.00!

New complete custom dash kit for your 67 - 68 Firebird model. Includes speedometer, 10K tachometer, fuel, oil, amp, and temp gauges. Gauges are wired and come with sending units for installation. The Velocity Series will give your dash an updated look with a black face, orange needle and a clean graphic layout. Includes turn signal leds and high beam led lights. Speedtachular and Quad cluster 0-90 ohm fuel (stock ohm range for 67-68). Gauges are pre-mounted in the correct factory style dash housing.

Note: Fuel sending unit not included.

PART NUMBER: DAS-527
1967 - 1968 Dash Instrument Cluster Housing with Gauges (Velocity White), Custom OE Style
1967 - 1968 Dash Instrument Cluster Housing with Gauges (Velocity White), Custom OE Style
Our Price: $1,129.95
Sale Price: $999.95
You save $130.00!

New complete custom dash kit for your 67 - 68 Firebird model. Includes speedometer, 10K tachometer, fuel, oil, amp, and temp gauges. Gauges are wired and come with sending units for installation. The Velocity Series will give your dash an updated look with a white face, orange needle and a clean graphic layout. Includes turn signal leds and high beam led lights. Speedtachular and Quad cluster 0-90 ohm fuel (stock ohm range for 67-68). Gauges are pre-mounted in the correct factory style dash housing.

Note: Fuel sending unit not included.

PART NUMBER: DAS-528
1967 - 1968 Dash Instrument Cluster Housing with Gauges (Vintage), Custom OE Style
1967 - 1968 Dash Instrument Cluster Housing with Gauges (Vintage), Custom OE Style
Our Price: $1,129.95
Sale Price: $999.95
You save $130.00!

New complete custom dash kit for your 67 - 68 Firebird model. Includes speedometer, 8K tachometer, fuel, oil, amp, and temp gauges. Gauges are wired and come with sending units for installation. This is the timeless styling of the Vintage Series version which features antique white face, black numbering, orange needles and a classic script design. Includes turn signal leds and high beam led lights. Speedtachular and Quad cluster 0-90 ohm fuel (stock ohm range for 67-68). Gauges are pre-mounted in the correct factory style dash housing.

Note: Fuel sending unit not included.

PART NUMBER: DAS-526
1967 - 1968 Dash Instrument Cluster Housing with White Gauges, Custom OE Style
Our Price: $999.95

New complete custom dash kit for your 67-68 Firebird model.  Includes speedometer, tachometer, fuel, oil, amp, and temp gauges.  Gauges are wired and come with sending units for installation.  Features white backround, with black lettering, and black needles.  Includes turn signal LEDs and high beam LED lights.  Speedtacular and Quad cluster 0-90 ohm fuel (stock ohm range for 67-68).  140 MPH speedo!!  Gauges are pre-mounted in the correct factory style dash housing.

Part Number - DAS-522
1967 - 1968 Firebird Custom Dash Gauge Housing Panel with No Holes
1967 - 1968 Firebird Custom Dash Gauge Housing Panel with No Holes
Our Price: $129.95

New extra cool dash housing panel for your 67 - 68 Firebird.  Molded UV resistant ABS instrument panel with your choice of either a Black, Brushed Aluminum, or Carbon Fiber finish. Please make your selection from the available drop-down menu.  Will replace the stock gauge panel exactly.

PART NUMBER: DAS-422N
1967 - 1968 Fuel Gas Tank, LS1, Narrowed, Stainless Steel, Fuel Injected
Our Price: $1,299.95

These stainless steel narrowed fuel tanks are designed specifically for use with The DSE mini-tub kit. These are a direct bolt-in using the original mounting location, and stainless steel fuel tank straps are provided. They are available for fuel injected or carbureted engines. All carbureted tanks have a 1/2" NPT fuel pick-up fitting compatible with either -8 AN or -10 AN fuel line. The DSE LS1 fuel pumps use a Walbro GSS340 electric in-tank pump that delivers 60-65 PSI @ 55gl/hr (on 13.5 volts). All tanks are baffled and pressure tested. 0-90 ohm fuel sending units for Camaro/Firebird are sold separately.

Part Number: FUE-466
1967 - 1968 Seatbelts Set, Retractable Shoulder 3 pt. Rear, Chrome Buckles with "GM Mark of Excellence" Buttons and Choice of Belts Color
1967 - 1968 Seatbelts Set, Retractable Shoulder 3 pt. Rear, Chrome Buckles with "GM Mark of Excellence" Buttons and Choice of Belts Color
Our Price: $379.95
Sale Price: $359.95
You save $20.00!

New custom rear 3 point seat belts for 67 - 68 Firebird.  Safety and comfort come first with our seat belts. Kits come complete with instructions, Grade 8 mounting hardware and powder-coated mounting brackets, assembled and ready to bolt into your car.  These seat belt systems mount in the factory mounting holes; no modifications needed.  The top soft sash design looks like "stock" and comes with plastic clamshell covers.  All our belts have been safety tested and meet FMVSS standards!  This kit comes with everything to keep 2 passengers safe and sound riding in the back seat.  Buttons feature the "GM Mark of Excellence" logo.  Fits all 67 - 68 coupe models.

NOTE: Please select your desired seat belt color from the drop-down menu on your screen.
NOTE: Please allow 1 - 2 weeks to manufacture.

Part Number: INT-1307CA
1967 - 1968 Steering Column Wiring Connector, Tilt, Custom
Our Price: $24.95

New female wiring harness plug for your Custom Tilt Columns. Supplied with 10 wire terminals. Can be used to adapt any existing wiring harness to mate with FR 4-1/2" connector. Fits 67 - 68 Firebird models with custom steering columns.

Part Number: STE-251
1967 - 1968 Steering Column, Tilt, Floor Shift, Custom, Choice of Finish
Our Price: $449.95

Add the convenience and reliability of a new column built specific for 67 - 68 Firebird. This steering column is not a universal column that requires modification of your original vehicle to install. Simply remove your old column, saving your original under dash mount as well as the original floor mount. Choose Your Finish.

Part Number: STE-312
1967-1981 Aluminum Pedals Set for Automatic Transmission
1967 - 1969 Aluminum Pedals Set for Automatic Transmission
Our Price: $479.95

New super cool aluminum pedals set for your 67, 68 or 69 models.  Exact fit for all automatic transmission cars.  Must use accelerator cable for gas pedal.  Includes all hardware needed for installation.  Complete set with both firewall mounted accelerator pedal kit and a matching custom auto brake pedals assembly.  Truly a beautiful set!

PART NUMBER: PPD-36
1967 - 1969 Billet Aluminum Hood Hinges
Our Price: $650.00

One of our best-selling hinges ever, the H-1309 hinge was designed to fit the 1967, 1968, and 1969 Pontiac Firebird. However, the H-1309s also fit several other makes/models including 1967-1969 Camaros, 1965–1967 Chevelles, Monte Carlos, El Caminos, Impalas, 1966-1967 Novas* and even early model Holdens. Originally designed in 2007 and then improved in 2008 with 9 more inches of hood opening, our H-1309 hinge is our most versitally reliable hood hinge. As with all our products, the H-1309 were designed in our Scottsdale facility and then manufactured using only the best grades of aluminum, bearings and hardware. Each set is hand assembled in house after rigorous quality control checks.

PART NUMBER: SHE-1300
1967 - 1969 Billet Aluminum Trunk Lid Hinges Set - Pair
1967 - 1969 Billet Aluminum Trunk Lid Hinges Set - Pair
Our Price: $299.95

Fesler billet trunk hinges for the 1967, 1968, and 1969 Firebird.  The tension rods are removed and replace with gas struts to hold the trunk up so it will stop falling on you.  Comes with all hardware and take about an hour to install.  You can also install them on a finished car.

PART NUMBER: SHE-320
1967 - 1969 Billet Fender Supports (Polished)
1967 - 1969 Billet Fender Supports Bars (Polished)
Our Price: $174.95

Brand new three piece design.  These fender bars are made of billet aluminum polished to a show car shine.  Sold in a set to do both fenders.  Fits both small block and big block models.

Part Number: SHE-1230
1967 - 1969 Bolt On 4-Link, Ride Tech
Our Price: $1,299.95

The Ridetech Bolt-On 4-Link installs onto the oem leaf spring mounts of your prized musclecar... no cutting, no fabrication, just 4 small tabs to weld to the axle for your upper bars. The ride height of your car is typically lowered by approximately 2”. The ride quality is dramatically improved over stock... instead of a wallowing soft ride you’ll experience a crisp, controlled ride quality that will inspire more confidence for performance driving. If you want your classic muscle car to ride and drive like a modern performance car, the Bolt-On 4-Link system is the perfect solution!

Part Number: SUS-470
1967 - 1969 Convertible Top - Premium Cloth Style ( FOLDING GLASS WINDOW )
Our Price: $599.95

New style cloth convertible top for your firebird!  Includes ultra cool folding glass rear window .  Similar to what you would see on new mercedes, jaguar, bmw, ect..  Luxurious and beautiful!  Premium quality Stayfast material.  Super cool upgrade to any convertible.  Rear glass windows can be ordered as a sew in unit or you can do a zip out option.  Please choose desired color, Black or Beige (Tan).

Part Number: CNV-49
1967 - 1969 Custom Inner Rear View Mirror, Black
1967 - 1969 Custom Inner Rear View Mirror, Black
Our Price: $49.95

Custom inner rear view mirror in black for 67 - 69 models.  Black pebble grain on the back side with black rubber outer edge.  Official GM Restoration Part.

PART NUMBER: INT-417C
1967 - 1969 Custom Inner Rear View Mirror, Black 8"
1967 - 1969 Custom Inner Rear View Mirror, Black 8"
Our Price: $49.95

Custom inner rear view mirror in black for 67 - 69 models.  Black pebble grain on the back side with black rubber outer edge.  Official GM Restoration Part.

PART NUMBER: INT-417D
1969 Custom Inner Rear View Mirror, Larger
1967 - 1969 Custom Inner Rear View Mirror, Larger
Our Price: $49.95

Need a little more rear view in your bird?  Here's your answer.  Fits all 67-69 models, hard top and convertible.  Exact factory looks, just a little wider.  Having trouble backing up?  This new mirror may help.

PART NUMBER: INT-417B
1967 - 1969 Custom Profile Pedal Kit for Automatic Transmission, Black Anodized
1967 - 1969 Custom Profile Pedal Kit for Automatic Transmission, Black Anodized
Our Price: $299.95

Dress up the business area of your Camaro with a Billet Specialties' ultra modern Profile Pedal Kit.
1967 - 1969 Custom Profile Pedal Kit for Automatic Transmission, Polished
1967 - 1969 Custom Profile Pedal Kit for Automatic Transmission, Polished
Our Price: $299.95

Dress up the business area of your Camaro with a Billet Specialties' ultra modern Profile Pedal Kit.
1967-1969 Custom Tilt Steering Column Swivel Floor Mount
1967 - 1969 Custom Steering Column Swivel Floor Mount
Our Price: $109.95

This swivel floor mount makes installing a custom column in your classic 67 - 69 model simple and attractive.  The machined aluminum ball swivels for easy positioning of the column at virtually any angle.  Polished aluminum with satin back plate.  Fits all standard steering columns and tilt steering columns.

Part Number: STE-255
1967 - 1969 DSE Coupe Roll Bar Cage Kit Non Mini Tubbed Cars
1967 - 1969 DSE Coupe Roll Bar Cage Kit Non Mini Tubbed Cars
Our Price: $674.95

DSE design follows the interior lines of the car. It does not interfere with the interior comfort and packages close to the headliner and back window glass.

Part Number: 011301
1967 - 1969 Firebird 8" Dual CHROME Booster with Brackets, CHROME Master Cylinder & Prop Valve Kit ( DISC / DISC )
Our Price: $319.95
Sale Price: $289.95
You save $30.00!

Add the Rest Mod Pro Touring look to your Firebird with this super stopping power CHROME booster kit. This new kit combines a chrome plated 1" bore master cylinder and a chrome proportioning valve kit for 4 wheel disc, 8" dual diaphragm chrome booster & stainless steel brackets with all the attachments pictured.

*This is for front and rear disc brake setups ( 4 Wheel Disc )

PART NUMBER: BRC-129CD
1967 - 1969 Firebird 8" Dual CHROME Booster with Brackets, CHROME Master Cylinder & Prop Valve Kit ( DISC / DRUM )
Our Price: $319.95
Sale Price: $289.95
You save $30.00!

Add the Rest Mod Pro Touring look to your Firebird with this super stopping power CHROME booster kit. This new kit combines a chrome plated 1" bore master cylinder and a chrome proportioning valve kit for front disc/ rear drum, 8" dual diaphragm chrome booster & stainless steel brackets with all the attachments pictured.

*This is for front disc and rear drum brake setups ( Disc/Drum )

PART NUMBER: BRC-129C
1967 - 1969 Firebird Billet Aluminum Bright Touch Universal Rearview Mirror
Our Price: $399.95

New ultra custom Firebird Billet Aluminum Interior Rear View Mirror.  Machined from 6061 aircraft grade aluminum and 304 stainless steel.   LED Map lighting "Bright Touch" on/off control sensor.  Self contained power source and 100% bolt-in.  Order yours today!!
 
*Due to this part's custom nature and options available please allow 2-4 weeks for delivery.
 
PART NUMBER: INT-1002
1967 - 1969 Firebird Billet Aluminum Trunk Lid Hinge Set ( Polished )
Our Price: $319.95

New billet trunk hinges for 1967-1969 models.  These come with everything you need to install them.  Comes with stainless struts to hold the trunk up so it will stop falling on you.  Comes with all hardware and takes about an hour to install. You can also install them on a finished car.  All CNC machined out one billet piece of 6061-t6 aluminum.  Hinges come standard with stainless steel gas shocks.  This product has a polished finish. Each hinge is machined to perfection in a manner which is not only fully functional but visually appealing as well.  No wait time, Order yours today.
 
*Fits all 1967 1968 1969 Firebird Models
 
PART NUMBER: SHE-321
1967 - 1969 Firebird Custom Fender Braces, Black Anodized Finish
Our Price: $224.95

Custom fender braces from Billet Specialties in black anodized finish for 67 - 69 models.



PART NUMBER: ENC-915A
1967 - 1969 Firebird Custom Fender Braces, Polished Finish
Our Price: $194.95

Custom fender braces from Billet Specialties in polished finish for 67 - 69 models.



PART NUMBER: ENC-915P
1967 - 1969 Firebird Custom Fender Braces, Raw Machined Finish
Our Price: $174.95

Custom fender braces from Billet Specialties in raw machined finish for 67 - 69 models.



PART NUMBER: ENC-915R
1967 - 1969 Firebird Custom Profile Pedal Kit for Manual Transmission, Black Anodized
1967 - 1969 Firebird Custom Profile Pedal Kit for Manual Transmission, Black Anodized
Our Price: $349.95

Dress up the business area of your Firebird with a Billet Specialties' ultra modern Profile Pedal Kit.
1967 - 1969 Firebird Custom Profile Pedal Kit for Manual Transmission, Polished
1967 - 1969 Firebird Custom Profile Pedal Kit for Manual Transmission, Polished
Our Price: $349.95

Dress up the business area of your Firebird with a Billet Specialties' ultra modern Profile Pedal Kit.
1967 - 1969 Firebird Door Sill Plates In Billet Aluminum with Choice of Finish
1967 - 1969 Firebird Door Sill Plates In Billet Aluminum with Choice of Finish
Our Price: $244.95

New custom billet aluminum door jam sill plates!  Complete set with stainless mounting hardware.  Made in the USA with premium quality 6061 billet aluminum.  You have a choice between two finishes including Polished with Lines and Satin with Lines.  Please choose your desired finish from the drop-down menu.   Both feature 5 ball milled detail lines.  Sold as a pair.

PART NUMBER: INT-92A
1967 - 1969 Overdrive Transmission Crossmember, 4L80E
Our Price: $285.95

New super heavy duty crossmember for your overdrive transmission.  Works great for all 4L80E transmissions.  Finished in a black powder coat.  Includes mounting hardware.  The best quality O/D crossmember we've found available.

PART NUMBER: TRA-807
1967 - 1969 Overdrive Transmission Crossmember, T56
Our Price: $229.95

New super heavy duty crossmember for your overdrive transmission.  Works great for T56 transmissions.  Finished in a black powder coat.  Includes mounting hardware.  The best quality O/D crossmember we've found available.

*Designed To Fit 93-97 Firebird or Firebird T56 Transmissions, all others would require modification to crossmember


PART NUMBER: TRA-809
1967 - 1969 Premium Quality 2 Inch Drop Front Coil Springs
1967 - 1969 Premium Quality 2 Inch Drop Front Coil Springs ( Pair )
Our Price: $169.95

New USA Made 67-69 coil springs front 2" drop.  These premium quality coil springs will give your 67-69 the stance it deserves.  Fits all V8 models.

Sold in a pair.

PART NUMBER: SUS-60
1967 - 1969 Rear Window Package Tray Speaker Shelf, Custom
Our Price: $229.95

Comes in raw hand-laid fiberglass with a gel coat finish. Speaker covers are provided. Can be upholstered or painted with minimal skills. Super cool addition for 67 - 69 Firebird. Premium quality, made in the USA!

PART NUMBER: INT-901
1967 - 1969 Seatbelts Set, Retractable Shoulder 3 pt. Rear, Chrome Buckles with "GM Mark of Excellence" Buttons and Black Belts
1967 - 1969 Seatbelts Set, Retractable Shoulder 3 pt. Rear, Chrome Buckles with "GM Mark of Excellence" Buttons and Black Belts
Our Price: $369.95
Sale Price: $349.95
You save $20.00!

New 3 point retractable rear seat belts set with chrome push button buckles and black belts for your 67 - 69 Firebird.  Safety and comfort come first with our seat belts. Kits come complete with instructions, Grade 8 mounting hardware and powder-coated mounting brackets, assembled and ready to bolt into your car. These seat belt systems mount in the factory mounting holes; no modifications needed. The top soft sash design looks like "stock" and comes with plastic clamshell covers. All our belts have been safety tested and meet FMVSS standards!

NOTE: Please be sure to select your model year from the drop-down menu on your screen.

Years: 1967 1968 1969

Part Number: INT-1307
1967 - 1969 Speed Tech Road Assault Suspension Kit
1967 - 1969 Speed Tech Road Assault Suspension Kit
Our Price: $1,889.00

Speed Tech Performance offers the ROAD ASSAULT suspension kit for the Ultimate road/track suspension setup. This combination will greatly improve the handling of your ride with the added feature for fine tuning your ride height and your bounce and rebound with the Viking shocks. This kit is the best choice for the true performance minded that wants their car to handle superbly but yet still be enjoyable to drive. If you want to greatly improve the handling of your ride and insure that you have the ultimate suspension setup for a conventional spring coil combination under the most extreme driving conditions at still an reasonable price, then this kit is for you.  PART NUMBER: SUS-391
1967 - 1969 Speed Tech Subframe Kit, Complete
1967 - 1969 Speed Tech Subframe Kit, Complete
Our Price: $4,999.00

Speed Tech Performance’s sub frame offers the benefits of rack and pinion steering, tubular sway bar, built in guildstrand mod, coil over shocks and.... you can reuse all your current aftermarket suspension components, brakes and wheels. Or upgrade to our High Clearance control arm set (included in complete sub frame kit).

PART NUMBER: SUS-337
1967 - 1969 Speed Tech Tubular Lower Control A-Arms Set
1967 - 1969 Speed Tech Tubular Lower Control A-Arms Set
Our Price: $599.00

The Tubular Lower Control Arms are CAD designed Mandrel Bent and all components are either laser cut or CNC machined for exact tolerances. They are made from 1.5" Seemless tubing with a wall thickness of .155. The control arms come complete powder coated with Acetron GP® type bushings and Energy Suspension™ Urethane Bump Stops.  Also included is an adjustable steering stop.  Sold as a paired set of one left hand control arm and one right hand control arm.

PART NUMBER: SUS-353
1967 - 1969 Speed Tech Tubular Upper Control A-Arm Set
1967 - 1969 Speed Tech Tubular Upper Control A-Arms, Pair
Our Price: $539.00

Speed Tech Performance Tubular Upper Control Arms are CAD designed, Mandrel bent, and all components are either laser cut or CNC machined for exact tolerances. They are made from 1.25" seamless tubing with a wall thickness of .125. The control arms come complete powder coated with stainless steel cross shafts, Acetron GP® type bushings, factory style Moog ball joints and urethane bump stops.  Sold as a pair.

PART NUMBER: SUS-349
1967 - 1981 Chrome Heater Core Cover Box at Firewall for Cars W/O AC
1967 - 1981 Chrome Heater Core Cover Box at Firewall for Cars W/O AC
Our Price: $89.95

New premium quality CHROME heater box for 67 - 81 Firebird.  New heavy chrome plating enhances the engine compartment while maintaining the stock heater core location.  Mounts on your firewall and covers the heater core.  Exact fit for all 67 - 81 models without air conditioning.
 
Part Number: HTR-55C
1967 - 1981 Custom Billet Gas and Brake Pedal Covers - Automatic
Our Price: $149.95

Add a custom look to your Firebird's interior with these stylish pedal covers from Firebird Central.  Machined from 6061-T6 billet aluminum with a BLACK ANODIZED FINISH.  Includes stainless steel mounting hardware.

PART NUMBER: PPD-52
1967 - 1981 DSE 1/2 Height Body Mount Bushings
1967 - 1981 DSE 1/2 Height Body Mount Bushings
Our Price: $129.95

Detroit Speed and Engineering's solid body mount bushings provide a simple approach to eliminating the flex that occurs between the body and subframe connection. This will improve vehicle handling response by increasing chassis stiffness. These mount bushings should be used when installing subframe connectors for maximum torsional rigidity.

PART NUMBER: SUS-526
1967 - 1981 Firebird 7" Dual Black Powder Coated Booster with Brackets, Aluminum Master Cylinder & Prop Valve Kit
Our Price: $319.95
Sale Price: $289.95
You save $30.00!

Add the Rest Mod Pro Touring look to your Firebird with this super stopping power booster kit. This new kit combines a light-weight and durable aluminum 1" bore (stainless steel bore) master cylinder and a bottom mounted aluminum proportioning valve kit with a corrosion resistant black-powdercoated 8" dual diaphragm booster &  bolt on powder coated brackets with all the attachments pictured. Booster comes powder coated which is one of the most durable finishes that you can find. Powder coated finishes don't react to brake fluid and resists corrosion.  Keeps looking good even under the worst conditions.

*This is for front disc/rear drum

PART NUMBER: BRC-129BK
1967 - 1981 Firebird Ultra Bright LED Dome / Console Bulb
1967 - 1981 Firebird Ultra Bright LED Dome / Console Bulb
Our Price: $11.95

This new LED bulb has 2 High Power Festoon LEDs per bulb.  Super Brightness: The luminance is 2 to 3 times stronger than traditional LED bulb.  Replaces any standard 211 bulb.  This bulb will replace the dome or console bulb.  Sold each, order yours today!!  

PART NUMBER: LIG-902
1967 - 1981 Firebird Ultra Bright LED Marker / Dash Bulb ( White ) PR
1967 - 1981 Firebird Ultra Bright LED Marker / Dash Bulb ( White ) Pair
Our Price: $12.95

These new LED bulbs have 5 High Power LEDs per bulb.  Super Brightness: The luminance is 2 to 3 times stronger than traditional LED bulb.  Replaces any standard 194 bulb.  Can't see your dash gauges??  Try these super bright LED bulbs to brighten up your dash or side marker lights.  This bulb will replace the dash or marker light bulbs.  Sold in a PAIR, order yours today!!  

PART NUMBER: LIG-903
1967 - 1981 Transmission Pan TH-400, Original GM AC Delco, Chrome
1967 - 1981 Transmission Pan TH-400, Original GM AC Delco, Chrome
Our Price: $44.95

Turbo 400 transmission pan for your 67 - 81 Firebird.  Features an extra handy drain plug for complete ease of use.  Heavy chrome plating mirror like finish.  Fits any GM muscle car with a TH 400 transmission.  Order yours today!

PART NUMBER: ENC-177
1967 - 1981 Turbo Transmission Pan TH-350 Polished Aluminum
1967 - 1981 Turbo Transmission Pan TH-350 Polished Aluminum
Our Price: $69.95

Premium quality, hand polished finish.  Show car ready!  Exact fit for all 67 - 81 Firebirds with turbo 350 automatic trans.  Included in this kit are the mounting gasket, drain plug, and high grade installation hardware set.

Part Number: ENC-226
1967 Automatic Transmission Adjustable Shifter Linkage Assembly
Our Price: $29.95

New adjustable shifter linkage for most any 1967 automatic transmissions.  Adjust from 12.5 inches to 16.5 inches.  Swivel ball joints on each end making this an easy-to-install custom linkage.  The most smooth shifter linkage kit on the market at a great price!

Part Number: TRA-627
1967 DSE Selecta Speed Windshield Wiper Motor Kit
Our Price: $524.95

A downpour of rain will no longer hinder you ability to clearly see the road.  This kit provides you with the performance and convenience of a late model wiper system in a package that easily and cleanly mounts in your car.  This kit includes a low profile, seven-speed wiper motor with 5 delays, low speed, and high speed, rotary switch with a billet knob, adapter plate, and wiring harness.  The CNC aluminum adapter plate mounts the wiper motor to your stock firewall bolt pattern.  This low profile wiper motor mounts to the firewall and clears the valve covers and brake booster.

Part Number: WIN-234
1967 Firebird Windshield Wiper Motor Hidden System With Delay Switch
Our Price: $559.95

This is the hidden wiper motor kit everyone has been looking for to clean up the firewall on your 1967 Firebird. Our hidden wiper motor system is a modern, high-quality replacement for the old system. It is the only replacement wiper system that is completely hidden, fitting entirely within the airbox in the cowl! This allows you to remove the stock wiper motor. The wiper motor hole in the firewall can be covered up with the cover plate supplied in the kit or you can weld in a patch panel to eliminate the hole entirely. Perfect for Pro Touring,  resto mod cars or if you just desire a clean looking firewall.
The kit comes complete less arms and blades.

Your stock arms will fit on our system.

* Image is a 1969 with delay switch

PART NUMBER: WIN-301
1967 Firewall Slick Panel WITH Wiper Hole and NO Heater
Our Price: $109.95

Firewall slick panel for 67 models with wiper hole, but no heater. Premium quality! These panels are made of 18ga anodized aluminum so they are easy to clean and can be painted to match. No need to remove your engine or even your distributor. Panels can be attached however you choose. Can be easily drilled for A/C fittings or wiring if needed.

Part Number: SHE-581
1967 Firewall Slick Panel WITH Wiper Motor Hole and Heater Box Hole
Our Price: $109.95

Firewall slick panel for 67 models with round wiper motor hole and heater box hole.  Premium quality! These panels are made of 18ga anodized aluminum so they are easy to clean and can be painted to match. No need to remove your engine or even your distributor. Panels can be attached however you choose. Can be easily drilled for A/C fittings or wiring if needed.


Part Number: SHE-582
1967 Seatbelts Set, Retractable Shoulder 3 pt. Front, Chrome Buckles with "GM Mark of Excellence" Buttons and Black Belts
1967 Seatbelts Set, Retractable Shoulder 3 pt. Front, Chrome Buckles with "GM Mark of Excellence" Buttons and Black Belts
Our Price: $349.95

New 3 point retractable seat belts set with chrome push button buckles for 67 Firebird. Safety and comfort come first with our seat belts. Kits come complete with instructions, Grade 8 mounting hardware and powder-coated mounting brackets, assembled and ready to bolt into your car. These seat belt systems mount in the factory mounting holes; no modifications needed. The top soft sash design looks like "stock" and comes with plastic clamshell covers. All our belts have been safety tested and meet FMVSS standards!

Part Number: INT-2184
1967 Seatbelts Set, Retractable Shoulder 3 pt. Front, Chrome Buckles with "GM Mark of Excellence" Buttons and Choice of Belts Color
1967 Seatbelts Set, Retractable Shoulder 3 pt. Front, Chrome Buckles with "GM Mark of Excellence" Buttons and Choice of Belts Color
Our Price: $359.95

New 3 point retractable seat belts set with chrome push button buckles for 67 Firebird. Safety and comfort come first with our seat belts. Kits come complete with instructions, Grade 8 mounting hardware and powder-coated mounting brackets, assembled and ready to bolt into your car. These seat belt systems mount in the factory mounting holes; no modifications needed. The top soft sash design looks like "stock" and comes with plastic clamshell covers. All our belts have been safety tested and meet FMVSS standards!

NOTE: Please select your desired belts color from the drop-down menu on your screen.
NOTE: Please allow 1 - 2 weeks to manufacture.

Part Number: INT-2184C
1967 Seatbelts Set, Retractable Shoulder 3 pt. Front, Starburst Buckles with Plain Chrome Buttons and Black Belts
1967 Seatbelts Set, Retractable Shoulder 3 pt. Front, Starburst Buckles with Plain Chrome Buttons and Black Belts
Our Price: $329.95

New 3 point retractable front seat belts set with chrome push button buckles for 67 Firebird. Safety and comfort come first with our seat belts. Kits come complete with instructions, Grade 8 mounting hardware and powder-coated mounting brackets, assembled and ready to bolt into your car. These seat belt systems mount in the factory mounting holes; no modifications needed. The top soft sash design looks like "stock" and comes with plastic clamshell covers. All our belts have been safety tested and meet FMVSS standards!

Part Number: INT-2180
1967 Seatbelts Set, Retractable Shoulder 3 pt. Front, Starburst Buckles with Plain Chrome Buttons and Choice of Belts Color
1967 Seatbelts Set, Retractable Shoulder 3 pt. Front, Starburst Buckles with Plain Chrome Buttons and Choice of Belts Color
Our Price: $339.95

New 3 point retractable front seat belts set with chrome push button buckles for 67 Firebird. Safety and comfort come first with our seat belts. Kits come complete with instructions, Grade 8 mounting hardware and powder-coated mounting brackets, assembled and ready to bolt into your car. These seat belt systems mount in the factory mounting holes; no modifications needed. The top soft sash design looks like "stock" and comes with plastic clamshell covers. All our belts have been safety tested and meet FMVSS standards!

NOTE: Please select your desired belts color from the drop-down menu on your screen.
NOTE: Please allow 1 - 2 weeks to manufacture.

Part Number: INT-2180C
1967-1968 Firebird Billet Tail Lamp Lens
1967-1968 Billet Aluminum Tail Light Lens Set
Our Price: $389.95
CURRENTLY UNAVAILABLE

1967-68 Pontiac Firebird Billet Tail Light Set. Will fit all 1967-68 Firebird's factory tail light housings.

Part Number: LIG-2047B
1967-1968 Custom Center Dash Panel 2 5/8" Gauge Holes
1967-1968 Custom Center Dash Panel 2 5/8" Gauge Holes
Our Price: $139.95

Custom center gauge panel with four 2 5/8" gauge holes.  Fits 67-68 models.  Please choose from a black, carbon fiber, or brushed aluminum finish.  Will replace the original unit.

PART NUMBER: DAS-424B
1967-1968 Custom Center Dash Panel with 2 1/16" Gauge Holes
1967-1968 Custom Center Dash Panel with 2 1/16" Gauge Holes
Our Price: $139.95

Custom center gauge panel with four 2 1/16" gauge holes.  Fits 67-68 models.  Please choose from a black, carbon fiber, or brushed aluminum finish that will replace the original unit.

Part Number: DAS-424A
1967-1968 Custom Dash Housing with Sport Comp Gauges
Our Price: $649.95

Molded ABS instrument panel choose from a black, carbon fiber, or brushed aluminum that will replace the original gauge housing. This panel comes with Autometer Sport Comp Gauges.  These clusters are complete with 3-3/8" 120 MPH Speedo, 8,000 RPM Tach, 2-1/16" Oil Pressure, 2-1/16" Water Temp., 2-1/16" Fuel Level, 2-1/16" Volt Gauges and oil pressure and water temp. sending units.  These are mechanical gauges.  Includes wiring harness and L.E.D. indicator set.  Premium quality!

Part Number: DAS-4228
1967-1968 Custom Tilt Steering Column Rag Joint for IDIDIT Columns
1967-1968 Custom Tilt Steering Column Rag Joint for IDIDIT Columns
Our Price: $119.95

This rag joint is a vibration reducer used between your column and gearbox. In some vehicles, the original rag joint is pressed onto the lower shaft of the column. If your rag joint has a pressed fit, it will need to be replaced. If your rag joint is removable, the original may be used. Please consider however that due to age, the original rag joint may be worn so please double check to make sure it is in good condition.  These unique style rag joints are only for use with IDIDIT brand steering columns.  Fits 67 - 68 models.

NOTE:  Please be sure to choose your desired diameter and spline count.

Firebird Years: 1967 1968

Part Number: STE-1015
1967-1968 Dash Drink Holder
1967-1968 Dash Drink Holder
Our Price: $39.95

Dash drink holder for 67-68 models.  Slides right in place of your ash tray in seconds.  All factory colors available.  Guaranteed satsfaction!!!  Please specify color.

PART NUMBER: DAS-391
1967-1968 Fuel Line Injection Fuel Tank L98, LT1
Our Price: $1,249.95

These stainless steel narrowed fuel tanks are designed specifically for use with The DSE mini-tub kit.  These are direct bolt-in using the original mounting location.  Stainless steel fuel tank straps are provided.  They are available for fuel injected or carbureted engines.  All carbureted tanks have a 1/2" NPT fuel pick-up fitting compatible with either -8 AN or -10 AN fuel line. The DSE LS1 fuel pumps use a Walbro GSS340 electric in-tank pump that delivers 60-65 PSI @ 55gl/hr (on 13.5 volts).  All tanks are baffled and pressure tested.  0-90 ohm fuel sending units for Firebird

Part Number: FUE-462
1967-1968 Lower Body Front Filler Close Out Panel
Our Price: $189.95

This panel was originally plastic and installed on the high horsepower a/c cars.  GM knew that air was being re-introduced to the front of the radiator when these cars idled.  At speed the pressure from air coming under the core support was working against the flow of air through the radiator, so this panel was designed.  The GM panel only goes as far as the core support. This panel will force ALL of the air from the grille through the radiator, so it goes all the way up to the backside of the spoiler (or to the valance).  It has a divider at the core support to finish off the seal.
They are very easy to install and remove for mechanical work. They are fabbed out of 14 gauge aircraft aluminum and come with all attaching parts and a cobalt drill for the 2 holes at the large crossmember.  These panels are anodized with an architectural grade process so they won't fade.

Part Number: SHE-1722
1967-1968 Power Rack and Pinion Cradle Kit
Our Price: $1,325.00

Flaming River has designed a direct bolt-in steering system that utilizes a manual rack and pinion engineered for your classic car!  The rack and pinion has a travel and ratio with full turning radius that feels almost like power steering!  The best part of this system is that it installs easily (within hours) using the existing chassis hole locations.  Patented cradle technology and the most complete kit on the market.

Add your choice of a Polished, Paintable, or Black Powder Coated steering column to make a complete kit.  Adding a column upgrade with this kit will also include: universal joints, shafts, wiring harness with hazards, column mount, horn contact kit, horn relay and u-joint.

Part Number: STE-234
1967-1968 Stainless Steel Narrowed Fuel Tank For Carbureted Cars
Our Price: $999.95

New stainless steel narrowed fuel tank designed specifically for use with mini-tub kits.  These are a direct bolt-in using the original mounting locations.  Stainless steel fuel tank straps are included.  All carbureted tanks have a 1/2" NPT fuel pick-up fitting compatible with either -8 AN or -10 AN fuel lines.  All tanks are baffled and pressure tested.  67-68 tank capacity is 17 gallons.  

Part Number: FUE-461
1967-1969 Billet Aluminum Hood Hinges (Polished)
Our Price: $539.95

1967-1969 Firebird Billet Hood Hinge Set with out any ugly logos.  These billet hood hinges are CNC machined to perfection and made in the USA.  They are made of 6061-T6 billet aluminum and utilize sealed bearings for smooth and long lasting operation.  This product is polished to a show quality shine at a fraction of the cost compaired to other polished billet hood hinges.  This is truly a great buy!!

Part Number: SHE-1301
1967-1969 Billet Fender Braces
Our Price: $175.00

New custom billet aluminum fender braces for your firebird.  Set handles left and right hand sides and comes complete with all hardware for installation.  Please choose desired finish from the drop-down menu.  Also, please allow additional time for custom finishes.  Fits all 67-69 models.

Part Number: SHE-1243
1967-1969 Billet Fender Braces - Curved
Our Price: $199.00

Billet fender braces for 67-69 models.  Fits around large radiators.  Set handles left and right hand sides and comes complete with all hardware for installation.  Please choose desired finish from the drop-down menu.  Also, please allow additional time for custom finishes.

Part Number: SHE-1248
1967-1969 Billet Hood Hinges Fusion Coated
1967-1969 Billet Hood Hinges Fusion Coated
Our Price: $599.95

Our billet hood hinges are CNC machined to perfection.  They are made of 6061-T6 billet aluminum and utilize sealed bearings for smooth and long lasting operation.  Great value without sacrificing quality.  These hinges fit 1967-1969 Firebird's and have a fusion coated finish.

Please choose from the availble color options: Black, Blue, Orange, Red, or Silver.

PART NUMBER: SHE-1305
1967-1969 Billet Hood Hinges Satin Finish
1967-1969 Billet Hood Hinges Satin Finish
Our Price: $599.95

These billet hood hinges are CNC machined to perfection.  They are made of 6061-T6 billet aluminum and utilize sealed bearings for smooth and long lasting operation.  Our hinges come complete with stainless steel gas struts and mounting hardware.

PART NUMBER: SHE-1304
1967-1969 Firebird Billet Tubular Adjustable Braces (Polished)
1967-1969 Billet Tubular Adjustable Support Bars (Polished)
Our Price: $124.95

Brand New three piece adjustable design. These fender bars are made of billet aluminum polished to a show car shine.

Sold in a set to do both fenders.

Part Number: SHE-1231
1967-1969 Convertible Top Boot Protective Storage Bag
Our Price: $29.95

New high grade convertible top boot storage bag.  Top boots are easy to damage.  When not in use, keep it in this new protective boot bag.  Super soft inner material, easy to slide in and out.

Part Number: CON-843
1967-1969 Custom Banjo Inside Door Handle
Our Price: $12.95

Custom banjo inside door release handle. For standard interior models only.  Sold each.

Part Number: INT-359
1967-1969 Custom Chrome Aluminum Inner Door Handles, Pair
Our Price: $39.95

These chrome aluminum inner door handles are a great way to personalize any first generation model. 3 inches in length.  Sold as a pair.

Part Number: INT-1060
1967-1969 Custom Chrome Door Handles Pair
Our Price: $85.95

Custom chrome door handles. Sold as a pair. Excellent quality! Drilled i-beam styling. Durable chrome plating comes with black & carbon fiber inserts so you choose. Inserts can also be painted or upholstered to match you car.  Fits standard interior models only.

Part Number: INT-1502
1967-1969 Custom Console Topper with Drink Holders
Our Price: $119.95

New super cool custom console for your Firebird.   Just slides right on top of your original console.  New deeper drink holders for your Big Gulp® or coffee.  Padded center door raises for plenty of storage.  Please specify your desired color.

PART NUMBER: CON-2921
1967-1969 Custom Inside Door Handle
Our Price: $12.95

Custom two bar inside release door handle.  For standard interior models only.  Sold each.

Part Number: INT-358
1967-1969 Custom Rubber Floor Mats Set, Firebird Block Letters w/ Bird Emblem
1967-1969 Custom Rubber Floor Mats Set, Firebird Block Letters w/ Bird Emblem
Our Price: $119.95

Custom rubber floor mats set.  Several colors to choose from.  Complete 4 piece kit.  Anti-slip grippers on the back side.  High-grade quality!  Please select your color from the drop-down menu.

Part Number : INT-2506
1967-1969 Custom Third Brake Light Package Tray Kit
Our Price: $149.95

New super cool rear window pakage tray with your third brake light assembly.  Exact fit for all 67 - 69 Firebird hardtop coupe models.  Made from high grade ABS material.  Can be painted or upholstered if desired.  Includes light wiring, speaker holes are 6x9 and angle toward the driver and passenger.  Nice custom addition with added safety.

Part Number: INT-109C
1967-1969 Custom Third Brake Light Package Tray Kit With Speakers
Our Price: $199.95

New super cool rear window pakage tray with your third brake light assembly.  Made from high grade ABS material.  Can be painted or upholstered if desired. Includes light wiring, speaker holes are 6x9 and angle toward the driver.  Speakers are two 120 watt 4 Ohm 6 X 9 each.  Nice custom addition with added safety.

Part Number # INT-109E
1967-1969 Deluxe Custom Center Console
Our Price: $159.95

New 67-69 deluxe custom center console in solid colors or with houndstooth (orange/black or white/black).  The houndstooth console has a two tone design with black madrid vinyl and correct houndstooh material.  The center glove box is huge for storing all kinds of goodies.  This amazing console just lays on the center hump or your factory console, secured be velcro.  Can be removed and stored in the trunk in seconds.

PART NUMBER: CON-820
1967-1969 Detroit Speed Hydroformed Subframe Powder Coated
Our Price: $7,449.95

Detroit Speed & Engineering’s all new front subframe is a bolt-in replacement for the original stock subframe.  It improves the handling and ride quality by utilizing DSE’s unique suspension geometry.

The subframe comes complete with the following components:
• Hydroformed Framerails
• Stamped Crossmembers
• Tubular Upper and Lower Control Arms
• Coilover Shocks for Subframe with "Detroit Tuned" valving
• Coilover Spring
• Power Rack and Pinion Steering
• Splined Sway Bar
• C6 Steering Knuckles and Bearing Packs.  

Please Call or Email for Shock and Upgrade options!!
Please Choose Engine Style.

Part Number: SUS-333
1967-1969 Door Sill Plates in Brushed Stainless Look
Our Price: $149.97

New custom 67-69 door jam sill plates. These are premium quality ABS plastic done with a brushed stainless steel look.  Made in the USA.  Sold in a matched pair.

PART NUMBER: INT-95
1967-1969 DSE Coil Spring Front 2 Inch Drop Pair
Our Price: $209.95

Detroit Speed & Engineering 67-69 coil spring front 2" drop.  These premium quality coil springs will give your 67-69 the stance it deserves. Will work great for all small block or LS engines.  Sold in a pair. If you need just one, give us a call or email.

Part Number: SUS-217
1967-1969 DSE Deep Rear Wheel House Tubs
Our Price: $349.95

These 1967-1969 deep tubs are rear inner wheel housings designed to accommodate wider tire and wheel packages for tires as wide as 335 mm.   They are designed for a perfect fit and will retain a stock-look appearance.  The deep tubs are almost three inches wider than stock, stamped from 18 gauge steel.

Part Number: 040401
1967-1969 DSE Fender Brace Kit
Our Price: $185.00

The new DSE fender brace kit is another way to beautify the engine compartment of your 1st or 2nd generation model. The fender brace kit has 100% CNC machined Clevis' from 304 stainless steel. The kit includes fabricated mounting brackets and comes with button head stainless steel mounting bolts. The fender braces triangulate the radiator core support to the fender and are fully adjustable, a benefit not available with your stock fender braces. All mounting brackets and tubes come powder coated in satin black.

Part Number: 011801
1967-1969 DSE Fender Support Bars Adjustable Brace Kit
Our Price: $185.00

The new DSE fender brace kit is another way to beautify the engine compartment of your 67-69 model.  The set includes fabricated mounting brackets and comes with button head stainless steel mounting bolts.  The fender braces triangulate the radiator core support to the fender and are fully adjustable, a benefit not available with your stock fender braces.

Part Number: SHE-1242
1967-1969 DSE LS Engine Mount And Bracket Set
Our Price: $274.95

Makes installing an LS engine in your 67-69 model hassle free.  Includes; frame engine stands, polyurethane engine mounts, CNC aluminum adapter plates, and all hardware.  Get the proper spacing and location with this kit.  Premium quality, made in the USA.

Part Number: ENC-573
1967 - 1969 DSE Roll Cage Kit for Mini Tubbed Cars
1967-1969 DSE Roll Cage Kit for Mini Tubbed Cars
Our Price: $674.95

DSE design follows the interior lines of the car. It does not interfere with the interior comfort and packages close to the headliner and back window glass.

Part Number: 011302
1967-1969 DSE Speed Suspension Kit 3
Our Price: $3,626.95

Our exclusive Detroit Speed front suspension kits combine our individual products into a system designed for your vehicle. The Speed Kit 3 is the most advanced handling system you can buy for use with the stock subframe. It gives you the ultimate steering performance of today's modern performance cars. Designed and made the USA.

Part Number: SUS-367
1967-1969 DSE Stock Height Front Coil Springs
Our Price: $209.95

New Detroit Speed & Engineering front coils for your 67-69 model.  Improve your ride and handling while retaining the stock height.  Premium quality.  

Part Number: SUS-813
1967-1969 DSE Subframe Connectors
Our Price: $189.95

These high grade Detroit Speed & Engineering weld in subframe connectors will increase your car's stiffness by connecting the front subframe to the rear frame rails.  

Part Number: SUS-528
1967-1969 DSE Tubular Lower Control A-Arms with Coilover Spring Pockets
Our Price: $659.95

Detroit Speed's tubular lower control arms replace stock lower control arms on all 1967-1969 Firebird models.  These new tubular lower control arms are shipped complete with lower ball joints, steering stops, jounce bumpers and are ready to install on your car.  Features include a robust tubular design with gussets and cross brace, Delrin bushings with steel housings and crush tubes, and a black powder coat finish.  The geometry features include additional positive caster and a dropped spring pocket compared to stock.  These lower a-arms are designed for coilover style shocks.  Premium quality, made in the USA!

Part Number: SUS-347
1967-1969 DSE Tubular Lower Control A-Arms With Stock Spring Pocket
Our Price: $659.95

Detroit Speed's tubular lower control arms replace stock lower control arms on all 1967-1969 models.  These new tubular control arms are shipped complete with lower ball joints, steering stops, jounce bumpers and are ready to install on your car.

Part Number: SUS-346
1967-1969 DSE Upper Control A-Arm Set
Our Price: $674.95

The Detroit Speed upper control arm kit is an excellent bolt on enhancement for any 67-69 model.  Suspension geometry is improved over stock by increasing camber gain and improving roll camber.  Premium quality, made in the USA!

Part Number: SUS-344
1967-1969 Fender Core Support Bars in Billet Aluminum - Brushed Finish
Our Price: $149.95

CNC machined from solid 7075-T6 aluminum, ProStyle™ core support bars feature intricate ball milled and slotted detail that will modernize and dress-up your engine compartment.

Part Number: SHE-1228
1967-1969 Firebird Billet Aluminum Hubs
Our Price: $399.00

The Billet aluminum hubs are made from a solid piece of 6061 T6 Aluminum and machined to exact tolerances. These new hubs replace the original drum hub with a weight savings of over one pound per hub. The hubs come with the following features;
Screw in ½” wheel studs for additional strength.
Anodized for long lasting wear and for a nice show quality finish.
All hubs come with bearing races installed
New bearings and grease seals included.
Billet aluminum dust cover that uses stainless steel screws for retention.

PART NUMBER: FX6769AH
1967-1969 Firebird Billet Door Sill Plates, Pair (Polished)
1967-1969 Firebird Billet Door Sill Plates, Pair (Polished)
Our Price: $289.95

New custom polished billet aluminum door jam sill plates!  Made in the USA with premium quality 6061 billet aluminum.  This version is the thickest we sell, polished to a show room shine.  Order a pair today!!

Sold as a pair.

PART NUMBER: INT-92E
1967-1969 Firebird Bucket Seat Extenders
Our Price: $79.95

New custom front bucket seat extenders.  Moves your seat back 2 inches at the floor giving you some added leg room.  A must have for any one who is looking for a little more room in their firebird.  Please select desired side, Left Hand or Right Hand.  

Part Number: INT-958
1967-1969 Firewall Slick Panel, No Holes
Our Price: $109.95

Firewall Slick Panel with no holes. Premium quality! These panels are made of 18ga anodized aluminum so they are easy to clean and can be painted to match. Easy to install, no need to remove your engine or even your distributor. Panels can be attached however you choose. Can be easily drilled for A/C fittings or wiring if needed.


Part Number: SHE-580
1967-1969 Firewall Slick Panel, With Heater Hole and Without Wiper Hole
1967-1969 Firewall Slick Panel, With Heater Hole and Without Wiper Hole
Our Price: $109.95

Firewall Slick Panel with heater hole and without wiper hole.  Premium quality!  These panels are made of 18ga anodized aluminum so they are easy to clean and can be painted to match.  Easy to install, no need to remove your engine or even your distributor.  Panels can be attached however you choose.  Can be easily drilled for A/C fittings or wiring if needed.

Firebird Years: 1967 1968 1969

Part Number: SHE-580H
1967-1969 Front Disc Brake Conversion Brackets
Our Price: $169.00

These newly designed brackets will allow you to install large C5 style brakes on your 67-69 model.  The key benefit of these brackets is the fact that you do NOT need to machine down the top boss of your drum spindle or use washers to make it line up.  These brake brackets are a simple bolt on with no modifications to the spindle.

The only thing you have to machine down is the outside diameter of the hub to an overall diameter of 6 inches to accommodate the C4 13" Corvette Rotor as well as replace the wheel studs...or you can purchase Speed Tech's  billet aluminum hubs and your ready to go.  

PART NUMBER: F6769BACS
1967-1969 Front Suspension Hot Kit
Our Price: $1,480.00

The Hot kit includes the following;
1. Speed Tech Performance Tubular Upper control arms with Stainless Steel Cross Shafts. For further details click here.
2. Speed Tech Performance Tubular Lower Control Arms. For further details click here.
3. QA1 GMP coil over kit for either small or big block motors. For further details click here.
4. Speed Tech Performance Tubular Tie Rod Sleeves. For further details click here.
This Hot kit is the ultimate choice to improving the handling of your ride.
1967-1969 Front Sway Bar Kit 1 Inch
Our Price: $159.95

New heavy duty front sway bar set for your Firebird.  Exact fit for all 67 - 69 models.  Includes; one inch diameter sway bar, both end links with polyurethane bushings, and mounting brackets.  Sway bar comes powder coated in black.

Part Number: SUS-50
1967-1969 Heater or A/C Delete Firewall Fill Smooth Panel
Our Price: $89.95

Our exclusive firewall fill plate is an excellent way to smooth your firewall.  Works great when installing an aftermarket air conditioning system or if you just want to clean up the firewall.  Our panel smooths the passenger side firewall while retaining the stock cowl to firewall seam.  This weld-in panel is made of 18-guage steel and has a rolled edge.  Works with all 67-69 models.

PART NUMBER: 010901
1967-1969 Manual Rack & Pinion - Chrome
Our Price: $749.95

Unisteer's 67-69 manual rack & pinion kit consists of the manual rack & pinion, mounting bracket, outer tie rods, and hardware with installation instructions.

Part Number: SUS-536
1967-1969 Manual Rack Steering Shaft Kit (1"DD Shaft)
Our Price: $299.00

Stock column or aftermarket 1-DD Column.  This is the shaft kit to be used with Unisteer's Manual Rack & Pinion kit.  Sold each.

Part Number: 8050580
1967-1969 Manual Rack Steering Shaft Kit (Factory Column)
Our Price: $299.00

Stock column or aftermarket 1-DD column.  This is the shaft kit to be used with Unisteer's Manual Rack & Pinion Kit.  Sold each.

Part Number: 8050570
1967-1969 Mono to Multi Leaf Rear Spring Conversion Kit
Our Price: $94.95

New super handy rear spring conversion for your firebird.  Works great for all 67 - 69 mono leaf or single rear leaf spring models.  Use this kit to convert you original mono-leaf rear axle to a multi-leaf configuration.  Comes with everything you need to correctly convert your mono-leaf rear axle including: U-bolts, a hardcoated steel locating pad, aluminum spacers, washers, and nuts.  You should not need to run the rubber spring pads with this conversion when using 4 or 5 leaf springs.  If your using 3 leaf springs you will need rubber pads also.

Part Number: SUS-525
1967-1969 Overdrive Transmission Crossmember
Our Price: $189.95

Installing an OD trans in your 67-69?  Heres the crossmember you need.  Premium quality, made in the USA.  Works for: 700R4, 700R6, 4L60, 4L60E, and 4L80E transmissions.

Part Number: TRA-833
1967-1969 Overdrive Transmission Crossmember G Force
1967-1969 Overdrive Transmission Crossmember G Force
Our Price: $229.95

New super heavy duty crossmember for your overdrive transmission.  Works great for all 700R4, 4L60, and 4L60E transmissions.  Finished in a black powder coat.  Includes mounting hardware.  The best quality O/D crossmember we've found.

PART NUMBER: TRA-808
1967-1969 Polyurethane Rear Leaf Spring Bushings Kit
1967-1969 Polyurethane Rear Leaf Spring Bushings Kit
Our Price: $79.95

Polyurethane front eye bushings and rear shackle bushings.  Be in control of your suspension while you're maneuvering through turns, doing drag-style launches, and braking.  These high performance leaf spring bushings are made of polyurethane, which is harder and stronger than rubber, but still not as hard as solid metal bushings.  These bushings add a higher level of performance and durability, and you'll feel the difference in positive handling and control.

*One kit does one car.  Premium quality.  Available in red or black.  Please choose from the available drop-down menu.

PART NUMBER: SUS-886
1967-1969 Polyurethane Upper and Lower Control Arm Bushing Kit For Stock A-Arms
Our Price: $79.95

These new urethane upper and lower control arm bushings are a great upgrade over stock units for much improved handling.  This kit includes one set of upper and lower control arm bushings, enough to do one car.  

PART NUMBER: SUS-824
1967-1969 Power Rack & Pinion Kit - Chrome
Our Price: $949.95

Unisteer's column flange adaptor to the bottom of the column, this adaptor provides a spline size 48 count spline, to which a U-joint can easily be attached.  In regards to the pump, the factory power steering pump on the car will work, but will require new lines.  If you do not have a pump, we recommend using a pump that was intended for use on a car with a rack & pinion, thus avoiding super sensitive steering.

Part Number: SUS-538
1967-1969 Pro Plus 14" 2 Piece Rotor Complete Front System Set
Our Price: $2,145.00

Baer introduces the ALL NEW Pro Plus brake systems featuring our brand new 6P, 6 piston calipers and 13” or 14” slotted, drilled and zinc washed, 2 piece rotors.  Attractive styling at an affordable price, Baer’s new Pro Plus front and rear brake systems are sure to please the most demanding owners and impress the most critical on-lookers!

Part Number: BRC-847
1967-1969 Rack and Pinion Steering Column Adaptor
1967-1969 Rack and Pinion Steering Column Adaptor
Our Price: $25.00

New steering column adaptor for your Firebird.  If you’re upgrading to a rack and pinion fron end set-up and using a stock/factory style steering column you will need to purchase this steering column adaptor.  

Part Number: 8020820
1967-1969 Show Chrome Hood Hinge Set
Our Price: $349.95

Premium quality, original guage.  Accurately stamped from high strength steel.  Heavy duty construction with hardened pivot points.  All parts polished then chrome plated.  Show quality.

Part Number: SHE-1008
1967-1969 Sill Plates in Real Carbon Fiber
Our Price: $229.95
CURRENTLY UNAVAILABLE

New custom carbon fiber door jam sill plates. Super strong design with the correct fit.These are not plastic with hydro coating. If you want thr real deal here they are. Body by fisher logo plates if desired Sold as a matched pair.

Part Number: INT-1038
1967-1969 Speed Tech Firebird Pro Touring Suspension
1967-1969 Speed Tech Firebird Pro Touring Suspension Kit
Our Price: $1,610.00

Speed Tech Performance offers the PRO TOURING suspension kit for the Ultimate Pro Touring Suspension setup. This combination will greatly improve the handling of your ride with the added feature for fine tuning your ride height and your bounce and rebound with the QA1 shocks. This kit is the best choice for the true performance minded that wants their car to handle superbly but yet still be enjoyable to drive. If you want to greatly improve the handling of your ride and insure that you have the ultimate suspension setup for a conventional spring coil combination under the most extreme driving conditions at still an reasonable price, then this kit is for you.

SUS-374
1967-1969 Speedometer Firewall Cable Hole Filler Plug
Our Price: $1.95

Speedometer firewall cable hole filler plug for 67-69 models.  If your not going to run a speedometer cable,  here is a nice plug to fill the hole in your firewall.

Part Number: DAS-323
1967-1969 Windshield Washer Jar In Black
Our Price: $26.95

Exact shape, size, and design as factory white version.

Part Number: WIN-237
1967-1972 Shifter Mounting Plate for Muncie Transmissions
Our Price: $39.95

Works only with HURST shifters and MUNCIE transmissions.  Not original appearance but fits and works GREAT!!!

Part Number: TRA-777
1967-1981 Billet Aluminum Body Mounts
Our Price: $139.95

The body mounts are CAD designed and all components are CNC machined to exact tolerances.  The body mounts are anodized T6061 T6 billet aluminum.  Everything you need to replace your worn out rubber body mounts. Hardware included.

Part Number: SUS-539
1967-1981 Body Mount Bolt Hardware Kit, Stainless Steel
1967-1981 Body Mount Bolt Hardware Kit, Stainless Steel
Our Price: $99.95

New high grade stainless body mount bolt set for 67-81 models.  Premium quality hardware set to mount your frame to the body.  Way superior to others on the market.

PART NUMBER: SUS-529
1967-1981 Custom Billet Dash Wiper/Headlight Knob
Our Price: $21.95

Custom billet dash knob.  Fits 67-68 wiper and 67-81 headlight knob.

PART NUMBER: DAS-1015
1967-1981 Custom Billet Dash Wiper/Headlight Knob
1967-1981 Custom Billet Dash Wiper/Headlight Knob
Our Price: $21.95

Custom billet dash knob.  Fits 67-68 wiper and 67-81 headlight knob.  Sold each.

PART NUMBER: DAS-1015A
1967-1981 Custom Billet OE Style Chrome Door Lock Knobs, Pair
1967-1981 Custom Billet OE Style Chrome Door Lock Knobs, Pair
Our Price: $21.95

New custom billet chrome door lock knobs for 67-81 models.  Raw finish is perfect.  They just look great!  

Sold as a pair.

PART NUMBER: INT-1024B
1967-1981 Custom Billet Ring Style Chrome Door Lock Knobs, Pair
1967-1981 Custom Billet Ring Style Chrome Door Lock Knobs, Pair
Our Price: $21.95

New custom billet chrome door lock knobs for 67-81 models.  Raw finish is perfect.  They just look great!  

Sold as a pair.

PART NUMBER: INT-1024C
1967-1981 Custom Chrome Window Cranks
Our Price: $85.95

Custom Chrome Window Cranks pair excellent Quality! Drilled i-beam styling, Durable chrome plating and comes with black & carbon Fiber inserts so you choose.
inserts can also be painted or upholstered to match you car.

PART NUMBER: INT-1500
1967-1981 Custom Door Jamb Striker Bolt Set Polished Pair
Our Price: $85.95

The bolt and washer are machined from solid 304 stainless steel.  Hand polished to a mirror finish.  Sold in a pair only.  Correct for all 67-81 models.  Show car ready and made in the USA!

Part Number: DWN-68P
1967-1981 Custom Hood Adjust Bolt & Bumper Set - Natural Finish
Our Price: $59.95

Machined from solid 304 stainless steel to be used for direct replacement of the factory units.  Show car ready and made in the USA!  New bump stop rubber provided.  Correct for all 67-81 models.  Sold as a pair only.

Part Number: SHE-808
1967-1981 Custom Hood Adjust Bolt & Bumper Set - Polished Finish
Our Price: $79.95

Machined from solid 304 stainless steel and are a direct replacement for the factory units. New bump stop rubber provided.  Sold in a pair only.
Correct for all 67-81 models.  Hand polished to a mirror finish.  Show car ready and made in the USA!

Part Number: SHE-809
1967-1981 Custom Hump Hugger Custom Console for Cars Not Equipped with a Factory Console
Our Price: $119.95

New super cool custom console for your 67-81 model.   Just slides right in between your bucket seats on the tunnel hump. New deeper drink holders for your Big Gulp® or coffee.  Padded center door raises for plenty of storage.  Please specify your desired color.

PART NUMBER: CON-922
1967-1981 Custom Window Cranks Chrome
Our Price: $85.95

Custom window cranks in chrome.  Sold as a pair.  Excellent Quality!  Drilled i-beam styling.  Durable chrome plating comes with black & carbon fiber inserts so you can choose.  Inserts can also be painted or upholstered to match you car.  

Part Number: INT-1501
1967-1981 Detroit Speed Billet Offset Rear Leaf Spring Shackle Set
Our Price: $284.95

DSE's exclusive billet aluminum offset shackles are designed to relocate the rear leaf springs inboard to accommodate larger rear tires.  They were computer modeled and optimized with FEA, tested, and then CNC machined.  They relocate the rear leaf spring inboard to accommodate 335 tires ( with a section of 13.5" ) on your firebird or trans am.  The shackle offset is 1-3/4".  Use along with our other mini-tub components to complete your project.  Kit includes 4 offset shackles and Grade 8 fasteners.  This is the ORIGINAL billet aluminum offset shackle set!  The DSE shackle is designed for maximum suspension travel. There are hundreds of our shackles on the road and track with proven performance.  Do not accept any imitation!

Note: The stock fuel tank will need to be narrowed or use DSE's new narrowed stainless steel fuel tank when relocating your rear leaf springs.  

Part Number: SUS-524
1967-1981 Detroit Speed Lowered Multi Leaf Spring Set with 3" Drop
Our Price: $385.00

These DSE multi-leaf springs have a spring rate of 175 lb/in..  The difference between these leaf springs and others is that they not only give you the handling you are looking for, but do not sacrifice ride quality.  The springs have a tapered leaf with an anti-friction pad between each leaf to help provide a smooth ride.  Premium quality, made in the USA!

Part Number: SUS-872
1967-1981 Detroit Speed Lowered Multi Leaf Spring Set With a 2" Drop
Our Price: $385.00

These DSE multi-leaf springs have a spring rate of 175 lb/in.  The difference between these leaf springs and others is that they not only give you the handling you are looking for, but do not sacrifice ride quality.  The springs have a tapered leaf with an anti-friction pad between each leaf to help provide a smooth ride.  Premium quality, made in the USA!

Part Number: SUS-523
1967-1981 DSE Stock Height Body Mount Bushings
Our Price: $129.95

New high grade body mounts for your bird.  Detroit Speed and Engineering's solid body mount bushings provide a simple approach to eliminating the flex that occurs between the body and subframe connection.  This will improve vehicle handling response by increasing chassis stiffness.  These mount bushings work great fora any model but especially when using subframe connectors for maximum torsional rigidity.  

PART NUMBER: SUS-527
1967-1981 Fesler Billet Aluminum Body Mount Bushing Kit Black Anodized
Our Price: $179.95

Fesler billet aluminum body mount bushing kit for 67-81 Firebird.  Black anodized.  Each includes hardware.

PART NUMBER: SUS-819
1967-1981 Fesler Billet Aluminum Body Mounts
Our Price: $175.00

New super cool billet aluminum body mounts.  Includes high grade installation mounting hardware bolt set.  This version is for stock height applications.

PART NUMBER: SUS-815
1967-1981 Firebird Custom Hood Adjust Bolt & Bumper Set 5/16 - Stainless
Our Price: $54.95

Machined from solid 304 stainless steel to be used for direct replacement of the factory units.  Show car ready and made in the USA!  New bump stop rubber provided.  Correct for all 67-81 models.  Sold as a pair only.

Part Number: SHE-810
1967-1981 Hood Hinge Spring Set for Fiberglass Hoods , Pair
Our Price: $28.95

New hood hinge springs for all light weight fiberglass hoods.  These are really designed for aftermarket fiberglass hoods.  If you have a 70-81 original GM formula style hood, you may want to use our part number # SHE-122.  Fits all stock factory style hinges.  Premium quality!  Sold in a pair only.


Part Number: SHE-223
1967-1981 Polished Aluminum 700R4W Transmission Pan
1967-1981 Polished Aluminum 700R4W Transmission Pan
Our Price: $69.95

Premium quality, hand polished finish.  Show car ready!  Exact fit for all 700R4W trans.  Includes gasket and mounting hardware with this kit.

PART NUMBER: ENC-226C
1967-1981 Rear End Cover Bolt Set in Chrome
1967-1981 Rear End Cover Bolt Set in Chrome
Our Price: $15.95

New premium quality chrome rear end cover hardware set for your bird.  Exact fit for all 67 - 70 firebird and trans am models with a 12 bolt rear end

PART NUMBER # SUS-200
1967-1981 Speed Tech Firebird Chicane Coil Over Conversion Kit with QA1 Single Adjustable Coil Overs
1967-1981 Speed Tech Firebird Chicane Coil Over Conversion Kit with QA1 Single Adjustable Coil Overs
Our Price: $749.00

Race inspired; track tested; street driven. The Chicane weld-in coil over conversion for the 67 - 69 Firebird is the most advanced coil over conversion on the market today. Adjustable ride height is a requirement for track raced vehicles. The ability to properly setup the chassis to the track conditions is one of the basic fundamentals for achieving low lap times. Being able to do these adjustments without removing any components from the vehicle was a primary design requirement for the Chicane weld-in coil over kit. The kit is designed to be welded in place of the factory upper shock mount, converting to a double sheer coil over mount. Since the factory upper control arm mounting bracket remains unaltered, the kit can be used with factory or Guldstrand modified frames. Unlike other coil over kits offered, the Chicane is the only true coil over system that can be adjusted on car, including ride height and both rebound/compression. Welding of the Chicane coil over kit is basic and straight forward, and can be completed by a certified welder within an hour, since engine removal is not a requirement for installation. The kit includes 2 weld in double sheer laser cut cages; fully welded with a stiffener plate and coil over spacer, and all needed hardware.

Years: 1967 1968 1969 1970 1971 1972 1973 1974 1975 1976 1977 1978 1979 1980 1981

SUS-556C
1967-1981 Speed Tech Firebird Chicane Coil Over Conversion Kit with Ride Tech Single Adjustable Coil Overs
1967-1981 Speed Tech Firebird Chicane Coil Over Conversion Kit with Ride Tech Single Adjustable Coil Overs
Our Price: $945.00

Race inspired; track tested; street driven. The Chicane weld-in coil over conversion for the 67 - 69 Firebird is the most advanced coil over conversion on the market today. Adjustable ride height is a requirement for track raced vehicles. The ability to properly setup the chassis to the track conditions is one of the basic fundamentals for achieving low lap times. Being able to do these adjustments without removing any components from the vehicle was a primary design requirement for the Chicane weld-in coil over kit. The kit is designed to be welded in place of the factory upper shock mount, converting to a double sheer coil over mount. Since the factory upper control arm mounting bracket remains unaltered, the kit can be used with factory or Guldstrand modified frames. Unlike other coil over kits offered, the Chicane is the only true coil over system that can be adjusted on car, including ride height and both rebound/compression. Welding of the Chicane coil over kit is basic and straight forward, and can be completed by a certified welder within an hour, since engine removal is not a requirement for installation. The kit includes 2 weld in double sheer laser cut cages; fully welded with a stiffener plate and coil over spacer, and all needed hardware.

Years: 1967 1968 1969 1970 1971 1972 1973 1974 1975 1976 1977 1978 1979 1980 1981

SUS-556A
1967-1981 Turbo 400 Transmission Pan Polished Aluminum ( TH-400 )
1967-1981 Turbo 400 Transmission Pan Polished Aluminum ( TH-400 )
Our Price: $69.95

Premium quality, hand polished finish.  Show car ready!  Exact fit for all turbo 400 trans.  Includes gasket and mounting hardware with this kit.

PART NUMBER: ENC-226B
1967-1992 Hi-Performance Power Steering Pump Cast Iron
1967-1992 Hi-Performance Power Steering Pump Cast Iron
Our Price: $175.95

New high grade performance power steering pump for your bird. Exact fit for all 67 -92 model Firebirds with Chevy engines. Premium quality pumps at a price comparable to original units.

Part Number: POW 332
1967-1992 Polyurethane Transmission Mount
Our Price: $39.95

Exact fit for all manual and automatic transmissions except 90-92 Firebirds with manual 5 speed.  Includes hardware.

Part Number: TRA-724
1967-2002 Custom Bird Emblem
Our Price: $45.95

New custom emblem you can mount anywhere you like. Premium quality automobile grade backing thats peel and stick so its easy to install. Wing span at the top tip is 2 1/2 inches and width is 1/8 of an inch. These look great !!!!!

Part Number: EMB-2102
1967-2002 Custom Bird Emblem
Our Price: $39.95

New custom emblem you can mount anywhere you like.  Premium quality automobile grade backing thats peel and stick so its easy to install.  Wing span at the top tip is 1 and 3/8 inches and width is 1/8 of an inch.  These look great for your sail panels, fenders, toolbox, fridge or most anywhere your wife will let you!

Part Number: EMB-2103
1967-2002 Custom Sunvisor Vanity Mirror
Our Price: $37.95

New Interior mirror that mounts on your sunvisor easy to install clip on design, looks great on any model. Measures 10 inches by 3.5 inches. Features Pontiac lettering at the top.

Part Number: INT-2207
1967-2011 Fender Cover with Clear Pouch Pockets
Our Price: $24.95

Fender cover with clear pouch pockets for 67-11 models.  Unique pouches hold tools or paper work.  Held in place with straps and velcro fasteners.

PART NUMBER: GIF-238
1968 - 1969 Door Jamb Air Vent Louvers, Billet Aluminum, Black Anodized, Pair
1968 - 1969 Door Jamb Air Vent Louvers, Billet Aluminum, Black Anodized, Pair
Our Price: $169.95

Replace those plastic door vents with a set of precision machined billet aluminum vents from Billet Specialties. Our billet vents feature a 3D machined design with a stainless mesh insert for cutting edge style. Includes stainless hardware.  PART NUMBER: INT-1606A
1968 - 1969 Door Jamb Air Vent Louvers, Billet Aluminum, Raw Machined Finish, Pair
1968 - 1969 Door Jamb Air Vent Louvers, Billet Aluminum, Raw Machined Finish, Pair
Our Price: $139.95

Replace those plastic door vents with a set of precision machined billet aluminum vents from Billet Specialties. Our billet vents feature a 3D machined design with a stainless mesh insert for cutting edge style. Includes stainless hardware.  PART NUMBER: INT-1606R
1968 - 1969 Firebird Custom Billet Aluminum Door Jamb Louvers / Vents, Choose Finish
Our Price: $109.95

Replace those plastic door vents with a set of precision machined billet aluminum door jam vents / louvers. These NEW Camaro billet vents feature a modern design with a stainless circular mesh insert for stunning look. Choose your finish: Machine, Polished, Clear Anodized, Matte Black or Gloss Black. Order your set today!
PART NUMBER: INT-1608
1968 - 1969 Firebird Custom Door Jamb Vents, Polished
1968 - 1969 Firebird Custom Door Jamb Vents, Polished
Our Price: $149.95

Replace those plastic door vents with a set of precision machined billet aluminum vents from Billet Specialties. Our billet vents feature a 3D machined design with a stainless mesh insert for cutting edge style. Includes stainless hardware.

PART NUMBER: INT-1606P
1968 - 1969 Firebird Door Jam Vent Louvers Billet Pair
1968 - 1969 Firebird Door Jam Vent Louvers Billet Pair
Our Price: $149.95

Custom door jam vents.  Machined from solid 6061-T6 billet aluminum.  Mesh insert has 1/8 inch holes and is made of stainless steel.  100% bolt-in ready.  Made in the USA!  Sold in a pair only.  Please choose between Natural or Polished finish.

Part Number: INT-1600
1968 Firebird Windshield Wiper Motor Hidden System With Delay Switch
Our Price: $559.95

This is the hidden wiper motor kit everyone has been looking for to clean up the firewall on your 1968 Firebird. Our hidden wiper motor system is a modern, high-quality replacement for the old system. It is the only replacement wiper system that is completely hidden, fitting entirely within the airbox in the cowl! This allows you to remove the stock wiper motor. The wiper motor hole in the firewall can be covered up with the cover plate supplied in the kit or you can weld in a patch panel to eliminate the hole entirely. Perfect for Pro Touring,  resto mod cars or if you just desire a clean looking firewall.
The kit comes complete less arms and blades.

Your stock arms will fit on our system.

* Image is a 1969 with delay switch

PART NUMBER: WIN-303
1968 Seatbelts Set, Retractable Shoulder 3 pt. Front, Chrome Buckles with "GM Mark of Excellence" Buttons and Black Belts (Floor Mount)
1968 Seatbelts Set, Retractable Shoulder 3 pt. Front, Chrome Buckles with "GM Mark of Excellence" Buttons and Black Belts (Floor Mount)
Our Price: $349.95

New 3 point retractable seat belts set with chrome push button buckles for 68 Firebird. Safety and comfort come first with our seat belts. Kits come complete with instructions, Grade 8 mounting hardware and powder-coated mounting brackets, assembled and ready to bolt into your car. These seat belt systems mount in the factory mounting holes; no modifications needed. The top soft sash design looks like "stock" and comes with plastic clamshell covers. All our belts have been safety tested and meet FMVSS standards!

Part Number: INT-2186
1968 Seatbelts Set, Retractable Shoulder 3 pt. Front, Chrome Buckles with "GM Mark of Excellence" Buttons and Black Belts (Top Mount)
1968 Seatbelts Set, Retractable Shoulder 3 pt. Front, Chrome Buckles with "GM Mark of Excellence" Buttons and Black Belts (Top Mount)
Our Price: $349.95

New 3 point retractable seat belts set with chrome push button buckles for 68 Firebird. Safety and comfort come first with our seat belts. Kits come complete with instructions, Grade 8 mounting hardware and powder-coated mounting brackets, assembled and ready to bolt into your car. These seat belt systems mount in the factory mounting holes; no modifications needed. The top soft sash design looks like "stock" and comes with plastic clamshell covers. All our belts have been safety tested and meet FMVSS standards!

Part Number: INT-2185
1968 Seatbelts Set, Retractable Shoulder 3 pt. Front, Chrome Buckles with "GM Mark of Excellence" Buttons and Choice of Belts Color (Floor Mount)
1968 Seatbelts Set, Retractable Shoulder 3 pt. Front, Chrome Buckles with "GM Mark of Excellence" Buttons and Choice of Belts Color (Floor Mount)
Our Price: $359.95

New 3 point retractable seat belts set with chrome push button buckles for 68 Firebird. Safety and comfort come first with our seat belts. Kits come complete with instructions, Grade 8 mounting hardware and powder-coated mounting brackets, assembled and ready to bolt into your car. These seat belt systems mount in the factory mounting holes; no modifications needed. The top soft sash design looks like "stock" and comes with plastic clamshell covers. All our belts have been safety tested and meet FMVSS standards!

NOTE: Please select your desired belts color from the drop-down menu on your screen.
NOTE: Please allow 1 - 2 weeks to manufacture.

Part Number: INT-2186C
1968 Seatbelts Set, Retractable Shoulder 3 pt. Front, Chrome Buckles with "GM Mark of Excellence" Buttons and Choice of Belts Color (Top Mount)
1968 Seatbelts Set, Retractable Shoulder 3 pt. Front, Chrome Buckles with "GM Mark of Excellence" Buttons and Choice of Belts Color (Top Mount)
Our Price: $359.95

New 3 point retractable seat belts set with chrome push button buckles for 68 Firebird. Safety and comfort come first with our seat belts. Kits come complete with instructions, Grade 8 mounting hardware and powder-coated mounting brackets, assembled and ready to bolt into your car. These seat belt systems mount in the factory mounting holes; no modifications needed. The top soft sash design looks like "stock" and comes with plastic clamshell covers. All our belts have been safety tested and meet FMVSS standards!

NOTE: Please select your desired belts color from the drop-down menu on your screen.
NOTE: Please allow 1 - 2 weeks to manufacture.

Part Number: INT-2185C
1968 Seatbelts Set, Retractable Shoulder 3 pt. Front, Starburst Buckles with Plain Chrome Buttons and Black Belts
1968 Seatbelts Set, Retractable Shoulder 3 pt. Front, Starburst Buckles with Plain Chrome Buttons and Black Belts (Floor Mount)
Our Price: $329.95

New 3 point retractable front seat belts set with chrome push button buckles for 68 Firebird. Safety and comfort come first with our seat belts. Kits come complete with instructions, Grade 8 mounting hardware and powder-coated mounting brackets, assembled and ready to bolt into your car. These seat belt systems mount in the factory mounting holes; no modifications needed. The top soft sash design looks like "stock" and comes with plastic clamshell covers. All our belts have been safety tested and meet FMVSS standards!

Part Number: INT-2182
1968 Seatbelts Set, Retractable Shoulder 3 pt. Front, Starburst Buckles with Plain Chrome Buttons and Black Belts
1968 Seatbelts Set, Retractable Shoulder 3 pt. Front, Starburst Buckles with Plain Chrome Buttons and Black Belts (Top Mount)
Our Price: $329.95

New 3 point retractable front seat belts set with chrome push button buckles for 68 Firebird. Safety and comfort come first with our seat belts. Kits come complete with instructions, Grade 8 mounting hardware and powder-coated mounting brackets, assembled and ready to bolt into your car. These seat belt systems mount in the factory mounting holes; no modifications needed. The top soft sash design looks like "stock" and comes with plastic clamshell covers. All our belts have been safety tested and meet FMVSS standards!

Part Number: INT-2181
1968 Seatbelts Set, Retractable Shoulder 3 pt. Front, Starburst Buckles with Plain Chrome Buttons and Choice of Belts Color (Floor Mount)
1968 Seatbelts Set, Retractable Shoulder 3 pt. Front, Starburst Buckles with Plain Chrome Buttons and Choice of Belts Color (Floor Mount)
Our Price: $339.95

New 3 point retractable front seat belts set with chrome push button buckles for 68 Firebird. Safety and comfort come first with our seat belts. Kits come complete with instructions, Grade 8 mounting hardware and powder-coated mounting brackets, assembled and ready to bolt into your car. These seat belt systems mount in the factory mounting holes; no modifications needed. The top soft sash design looks like "stock" and comes with plastic clamshell covers. All our belts have been safety tested and meet FMVSS standards!

Part Number: INT-2182C
1968 Seatbelts Set, Retractable Shoulder 3 pt. Front, Starburst Buckles with Plain Chrome Buttons and Choice of Belts Color (Top Mount)
1968 Seatbelts Set, Retractable Shoulder 3 pt. Front, Starburst Buckles with Plain Chrome Buttons and Choice of Belts Color (Top Mount)
Our Price: $339.95

New 3 point retractable front seat belts set with chrome push button buckles for 68 Firebird. Safety and comfort come first with our seat belts. Kits come complete with instructions, Grade 8 mounting hardware and powder-coated mounting brackets, assembled and ready to bolt into your car. These seat belt systems mount in the factory mounting holes; no modifications needed. The top soft sash design looks like "stock" and comes with plastic clamshell covers. All our belts have been safety tested and meet FMVSS standards!

NOTE: Please select your desired belts color from the drop-down menu on your screen.
NOTE: Please allow 1 - 2 weeks to manufacture.

Part Number: INT-2181C
1968 Selecta Speed Windshield Wiper Motor Kit
Our Price: $524.95

A downpour of rain will no longer hinder you ability to clearly see the road. This kit provides you with the performance and convenience of a late model wiper system in a package that easily and cleanly mounts in your car.  This kit includes a low profile, seven-speed wiper motor with 5 delays, low speed, and high speed, rotary switch with a billet knob, adapter plate, and wiring harness.  The CNC aluminum adapter plate mounts the wiper motor to your stock firewall bolt pattern.  This low profile wiper motor mounts to the firewall and clears the valve covers and brake booster.

Part Number: WIN-235
1968-1969 ( 5 ) Leaf Multi Leaf Springs ( Pair ) Premium Quality Factory Height
Our Price: $289.95

These USA Made multi-leaf springs are made of the original GM blue prints to give you the factory height.  The springs have a tapered leaf and rolled edges with an anti-friction pad between each leaf to help provide a smooth ride.  Rolled ends gradually decrease in thickness.  The reduced thickness at the ends allow for increased flexibility of the leaf end, resulting in reduced stress and interleaf friction.  Rolled ends produce the smoothest acting spring.  

Fits 68-69 Models

PART NUMBER: SUS-680
1968-1969 Billet Aluminum Door Jamb Vents
Our Price: $159.95

1968-1969 Natural Billet Aluminum Door Jamb Vents. Pair

Part Number: INT-1603
1968-1969 Billet Aluminum Door Jamb Vents
Our Price: $159.95

1968-1969 Natural Billet Aluminum Door Jamb Vents with Solid Center. Pair

Part Number: INT-1603L
1968-1969 Firewall Slick Panel WITH Wiper Motor Hole and Heater Box Hole
Our Price: $109.95

Firewall slick panel for 68-69 models with wiper motor hole and heater box hole.  Premium quality! These panels are made of 18ga anodized aluminum so they are easy to clean and can be painted to match. No need to remove your engine or even your distributor. Panels can be attached however you choose. Can be easily drilled for A/C fittings or wiring if needed.

Part Number: SHE-584
1968-1969 Firewall Slick Panel WITH Wiper Motor Hole and NO Heater Box Hole
Our Price: $109.95

Firewall slick panel for 68-69 models with wiper motor hole and without heater box hole.  Premium quality! These panels are made of 18ga anodized aluminum so they are easy to clean and can be painted to match. Easy to install, no need to remove your engine or even your distributor. Panels can be attached however you choose. Can be easily drilled for A/C fittings or wiring if needed.


Part Number: SHE-583
1969 "502" Fender Emblems
Our Price: $49.75

"502" fender emblems for 69 models.  Sold as a matched pair.

Part Number: EMB-94P
1969 Custom Tilt Steering Column Rag Joint for Ididit Columns
1969 Custom Tilt Steering Column Rag Joint for IDIDIT Columns
Our Price: $119.95

This rag joint is a vibration reducer used between your column and gearbox.  In some vehicles, the original rag joint is pressed onto the lower shaft of the column.  If your rag joint has a pressed fit, it will need to be replaced.  If your rag joint is removable, the original may be used.  Please consider however that due to age, the original rag joint may be worn so please double check to make sure it is in good condition.  Fits 69 models.

NOTE:  Please don't forget to choose your desired box and spline count.

Firebird Years: 1969

Part Number: STE-1016
1969 Firebird Billet Tail Light Lens Assemblies
Our Price: $319.00
CURRENTLY UNAVAILABLE

New premium quality polished billet outer trim with new all red inner lenses.  Beautiful addition to any 69 bird.   Truely must see to believe.

Part Number: LIG-2068
1969 Firebird Windshield Wiper Motor Hidden System With Delay Switch
Our Price: $559.95

This is the hidden wiper motor kit everyone has been looking for to clean up the firewall on your 1969 Firebird. Our hidden wiper motor system is a modern, high-quality replacement for the old system. It is the only replacement wiper system that is completely hidden, fitting entirely within the airbox in the cowl! This allows you to remove the stock wiper motor. The wiper motor hole in the firewall can be covered up with the cover plate supplied in the kit or you can weld in a patch panel to eliminate the hole entirely. Perfect for Pro Touring,  resto mod cars or if you just desire a clean looking firewall.
The kit comes complete less arms and blades.

Your stock arms will fit on our system.

* Image is a 1969 with delay switch

PART NUMBER: WIN-305
1969 Fuel Gas Tank, L98 / LT1, Narrowed, Stainless Steel, Fuel Injected
Our Price: $1,299.95

These stainless steel narrowed fuel tanks are designed specifically for use with The DSE mini-tub kit.  These are direct bolt-in using the original mounting location.  Stainless steel fuel tank straps are provided.  They are available for fuel injected or carbureted engines.  All carbureted tanks have a 1/2" NPT fuel pick-up fitting compatible with either -8 AN or -10 AN fuel line. The DSE LS1 fuel pumps use a Walbro GSS340 electric in-tank pump that delivers 60-65 PSI @ 55gl/hr (on 13.5 volts).  All tanks are baffled and pressure tested.  0-90 ohm fuel sending units for Firebird

Part Number: FUE-465
1969 Lower Body Front Filler Close Out Panel
Our Price: $189.95

This panel was originally plastic and installed on the high horsepower a/c cars.  GM knew that air was being re-introduced to the front of the radiator when these cars idled.  At speed the pressure from air coming under the core support was working against the flow of air through the radiator, so this panel was designed.  The GM panel only goes as far as the core support.  This panel will force ALL of the air from the grille through the radiator, so it goes all the way up to the backside of the spoiler (or to the valance).  It has a divider at the core support to finish off the seal.
They are very easy to install and remove for mechanical work.  They are fabbed out of 14 gauge aircraft aluminum and come with all attaching parts and a cobalt drill for the 2 holes at the large crossmember.  These panels are anodized with an architectural grade process so they won't fade.

Part Number: SHE-1723
1969 Seatbelts Set, Retractable Shoulder 3 pt. Front, Chrome Buckles with "GM Mark of Excellence" Buttons and Black Belts
1969 Seatbelts Set, Retractable Shoulder 3 pt. Front, Chrome Buckles with "GM Mark of Excellence" Buttons and Black Belts
Our Price: $349.95

New 3 point retractable seat belts set with chrome push button buckles for 69 Firebird. Safety and comfort come first with our seat belts. Kits come complete with instructions, Grade 8 mounting hardware and powder-coated mounting brackets, assembled and ready to bolt into your car. These seat belt systems mount in the factory mounting holes; no modifications needed. The top soft sash design looks like "stock" and comes with plastic clamshell covers. All our belts have been safety tested and meet FMVSS standards!

Part Number: INT-2187
1969 Seatbelts Set, Retractable Shoulder 3 pt. Front, Chrome Buckles with "GM Mark of Excellence" Buttons and Choice of Belts Color
1969 Seatbelts Set, Retractable Shoulder 3 pt. Front, Chrome Buckles with "GM Mark of Excellence" Buttons and Choice of Belts Color
Our Price: $359.95

New 3 point retractable seat belts set with chrome push button buckles for 69 Firebird. Safety and comfort come first with our seat belts. Kits come complete with instructions, Grade 8 mounting hardware and powder-coated mounting brackets, assembled and ready to bolt into your car. These seat belt systems mount in the factory mounting holes; no modifications needed. The top soft sash design looks like "stock" and comes with plastic clamshell covers. All our belts have been safety tested and meet FMVSS standards!

NOTE: Please select your desired belts color from the drop-down menu on your screen.
NOTE: Please allow 1 - 2 weeks to manufacture.

Part Number: INT-2187C
1969 Seatbelts Set, Retractable Shoulder 3 pt. Front, Starburst Buckles with Plain Chrome Buttons and Black Belts
1969 Seatbelts Set, Retractable Shoulder 3 pt. Front, Starburst Buckles with Plain Chrome Buttons and Black Belts
Our Price: $329.95

New 3 point retractable front seat belts set with chrome push button buckles for 69 Firebird. Safety and comfort come first with our seat belts. Kits come complete with instructions, Grade 8 mounting hardware and powder-coated mounting brackets, assembled and ready to bolt into your car. These seat belt systems mount in the factory mounting holes; no modifications needed. The top soft sash design looks like "stock" and comes with plastic clamshell covers. All our belts have been safety tested and meet FMVSS standards!

Part Number: INT-2183
1969 Seatbelts Set, Retractable Shoulder 3 pt. Front, Starburst Buckles with Plain Chrome Buttons and Choice of Belts Color
1969 Seatbelts Set, Retractable Shoulder 3 pt. Front, Starburst Buckles with Plain Chrome Buttons and Choice of Belts Color
Our Price: $339.95

New 3 point retractable front seat belts set with chrome push button buckles for 69 Firebird. Safety and comfort come first with our seat belts. Kits come complete with instructions, Grade 8 mounting hardware and powder-coated mounting brackets, assembled and ready to bolt into your car. These seat belt systems mount in the factory mounting holes; no modifications needed. The top soft sash design looks like "stock" and comes with plastic clamshell covers. All our belts have been safety tested and meet FMVSS standards!

NOTE: Please select your desired belts color from the drop-down menu on your screen.
NOTE: Please allow 1 - 2 weeks to manufacture.

Part Number: INT-2183C
1969 Seatbelts Set, Retractable Shoulder 3 pt. Rear, Chrome Buckles with "GM Mark of Excellence" Buttons and Choice of Belts Color
1969 Seatbelts Set, Retractable Shoulder 3 pt. Rear, Chrome Buckles with "GM Mark of Excellence" Buttons and Choice of Belts Color
Our Price: $379.95
Sale Price: $359.95
You save $20.00!

New custom rear 3 point seatbelts for 69 Firebird.  Safety and comfort come first with our seat belts. Kits come complete with instructions, Grade 8 mounting hardware and powder-coated mounting brackets, assembled and ready to bolt into your car.  These seat belt systems mount in the factory mounting holes; no modifications needed.  The top soft sash design looks like "stock" and comes with plastic clamshell covers.  All our belts have been safety tested and meet FMVSS standards!  This kit comes with everything to keep 2 passengers safe and sound riding in the back seat.  Buttons feature the "GM Mark of Excellence" logo.  Fits all 69 coupe models.

NOTE: Please select your desired seat belt color from the drop-down menu on your screen.
NOTE: Please allow 1 - 2 weeks to manufacture.

Part Number: INT-1307CC
1969 Selecta Speed Windshield Wiper Motor Kit
Our Price: $524.95

A downpour of rain will no longer hinder you ability to clearly see the road.  This kit provides you with the performance and convenience of a late model wiper system in a package that easily and cleanly mounts in your car.  This kit includes a low profile, seven-speed wiper motor with 5 delays, low speed, and high speed, rotary switch with a billet knob, adapter plate, and wiring harness.  The CNC aluminum adapter plate mounts the wiper motor to your stock firewall bolt pattern.  The low profile wiper motor mounts to the firewall and clears the valve covers and brake booster.

Part Number: WIN-2360
1970 - 1972 Selecta-Speed Wiper Motor Kit Non Recessed Park
Our Price: $524.95

1970-1972 Detroit Speed Selecta-Speed Wiper Motor Kit Non-Recessed Park. A downpour of rain will no longer hinder you ability to clearly see the road. This kit provides you with the performance and convenience of a late model wiper system in a package that easily and cleanly mounts in your car.

*Note: Modifications required for switch to fit in factory dash.

PART NUMBER: WIN-100
1970 - 1972 Selecta-Speed Wiper Motor Kit with Recessed Park
Our Price: $599.95

1970 - 1972 Detroit Speed Selecta-Speed Wiper Motor Kit with Recessed Park. A downpour of rain will no longer hinder you ability to clearly see the road. This kit provides you with the performance and convenience of a late model wiper system in a package that easily and cleanly mounts in your car.

*Note: Modifications required for switch to fit in factory dash.

PART NUMBER: WIN-101
1970 - 1973 Seatbelts Set, Retractable Shoulder 3 pt. Front, Chrome Buckles with "GM Mark of Excellence" Buttons and Black Belts
1970 - 1973 Seatbelts Set, Retractable Shoulder 3 pt. Front, Chrome Buckles with "GM Mark of Excellence" Buttons and Black Belts
Our Price: $349.95

New 3 point retractable seat belts set with chrome push button buckles for 70 - 73 Firebird. Safety and comfort come first with our seat belts. Kits come complete with instructions, Grade 8 mounting hardware and powder-coated mounting brackets, assembled and ready to bolt into your car. These seat belt systems mount in the factory mounting holes; no modifications needed. The top soft sash design looks like "stock" and comes with plastic clamshell covers. All our belts have been safety tested and meet FMVSS standards!

Years: 1970 1971 1972 1973

Part Number: INT-2189
1970 - 1973 Seatbelts Set, Retractable Shoulder 3 pt. Front, Chrome Buckles with "GM Mark of Excellence" Buttons and Choice of Belts Color
1970 - 1973 Seatbelts Set, Retractable Shoulder 3 pt. Front, Chrome Buckles with "GM Mark of Excellence" Buttons and Choice of Belts Color
Our Price: $359.95

New 3 point retractable seat belts set with chrome push button buckles for 70 - 73 Firebird. Safety and comfort come first with our seat belts. Kits come complete with instructions, Grade 8 mounting hardware and powder-coated mounting brackets, assembled and ready to bolt into your car. These seat belt systems mount in the factory mounting holes; no modifications needed. The top soft sash design looks like "stock" and comes with plastic clamshell covers. All our belts have been safety tested and meet FMVSS standards!

NOTE: Please select your desired belts color from the drop-down menu on your screen.
NOTE: Please allow 1 - 2 weeks to manufacture.

Years: 1970 1971 1972 1973

Part Number: INT-2189C
1970 - 1973 Seatbelts Set, Retractable Shoulder 3 pt. Front, Starburst Buckles with Plain Chrome Buttons and Black Belts
1970 - 1973 Seatbelts Set, Retractable Shoulder 3 pt. Front, Starburst Buckles with Plain Chrome Buttons and Black Belts
Our Price: $329.95

New 3 point retractable seat belts set with chrome push button buckles for 70 - 73 Firebird. Safety and comfort come first with our seat belts. Kits come complete with instructions, Grade 8 mounting hardware and powder-coated mounting brackets, assembled and ready to bolt into your car. These seat belt systems mount in the factory mounting holes; no modifications needed. The top soft sash design looks like "stock" and comes with plastic clamshell covers. All our belts have been safety tested and meet FMVSS standards!

Years: 1970 1971 1972 1973

Part Number: INT-2188
1970 - 1973 Seatbelts Set, Retractable Shoulder 3 pt. Front, Starburst Buckles with Plain Chrome Buttons and Choice of Belts Color
1970 - 1973 Seatbelts Set, Retractable Shoulder 3 pt. Front, Starburst Buckles with Plain Chrome Buttons and Choice of Belts Color
Our Price: $339.95

New 3 point retractable seat belts set with chrome push button buckles for 70 - 73 Firebird. Safety and comfort come first with our seat belts. Kits come complete with instructions, Grade 8 mounting hardware and powder-coated mounting brackets, assembled and ready to bolt into your car. These seat belt systems mount in the factory mounting holes; no modifications needed. The top soft sash design looks like "stock" and comes with plastic clamshell covers. All our belts have been safety tested and meet FMVSS standards!

NOTE: Please select your desired belts color from the drop-down menu on your screen.
NOTE: Please allow 1 - 2 weeks to manufacture.

Years: 1970 1971 1972 1973

Part Number: INT-2188C
1970 - 1974 Overdrive Transmission Crossmember - G Force
Our Price: $229.95

New super heavy duty crossmember for your overdrive transmission.  Works great for all 700R4, 4L60, and 4L60E transmissions.  Finished in a black powder coat.  Includes mounting hardware.  The best quality O/D crossmember we've found available.

PART NUMBER: TRA-811
1970 - 1974 Overdrive Transmission Crossmember, 4L80E
Our Price: $285.95

New super heavy duty crossmember for your overdrive transmission.  Works great for all 4L80E transmissions.  Finished in a black powder coat.  Includes mounting hardware.  The best quality O/D crossmember we've found available.

PART NUMBER: TRA-813
1970 - 1974 Overdrive Transmission Crossmember, T56
Our Price: $229.95

New super heavy duty crossmember for your overdrive transmission.  Works great for T56 transmissions.  Finished in a black powder coat.  Includes mounting hardware.  The best quality O/D crossmember we've found available.

*Designed To Fit 93-97 Firebird or Firebird T56 Transmissions, all others would require modification to crossmember


PART NUMBER: TRA-812
1970 - 1974 Rear Window Glass Louver, ABS
Our Price: $349.95
Sale Price: $229.95
You save $120.00!

New custom Rear Window Louver 1 piece design for all 1970 - 1974 Firebird models. In complementing today's performance cars return to the past, we brought back one of the most popular accessory of the 60's, 70's and 80's for the Firebird with its ABS rear window louver. The ABS louvers are designed to keep your car cooler inside while making it look "COOL" on the outside and provide you some sense of privacy to the back seat area. Bring that classic muscle look back to your Camaro today.

PART NUMBER: DWN-560
1970 - 1974 Transmission Crossmember - G Force
Our Price: $229.95

New super heavy duty crossmember for your overdrive transmission.  Works great for all TH-350, Powerglide, Muncie M20, M21, M22, T-10, Super T-10 and Saginaw transmissions.  Finished in a black powder coat.  Includes mounting hardware.  The best quality crossmember we've found available.

PART NUMBER: TRA-810
1970 - 1975 Firebird ( 5 ) Leaf Multi Leaf Springs ( Pair ) Premium Quality Factory Height
Our Price: $289.95

These USA Made multi-leaf springs are made of the original GM blue prints to give you the factory height.  The springs have a tapered leaf and rolled edges with an anti-friction pad between each leaf to help provide a smooth ride.  Rolled ends gradually decrease in thickness.  The reduced thickness at the ends allow for increased flexibility of the leaf end, resulting in reduced stress and interleaf friction.  Rolled ends produce the smoothest acting spring.  

Fits 70 -75 Models

PART NUMBER: SUS-681
1967 - 1981 Firebird 7" Crystal Halogen Halo Headlight Set with 34 LED Auxiliary Bulbs ( Amber )
1970 - 1976 Firebird 7" Crystal Halogen Halo Headlight Set with 34 LED Auxiliary Bulbs ( Amber )
Our Price: $139.95

7" Crystal Headlight Bulb with 34 Amber Auxiliary LED Per Bulb - Reinforced multi-surfaced, aluminum reflector, anti-vibration design - Halogen bulb: HB2/9003 12V 65/55W, replaces H6017/H6024 - HB2/9003 Halogen headlight meets DOT/SAE standards, LED portion of the light for auxiliary/utility purposes such as park or turn signals.

Sold in a Pair

PART NUMBER:  HDL-317
1967-1981 Firebird 7" Crystal Halogen Halo Headlight Set with 34 LED Auxiliary Bulbs ( Clear )
1970 - 1976 Firebird 7" Crystal Halogen Halo Headlight Set with 34 LED Auxiliary Bulbs ( Clear )
Our Price: $139.95

7" Crystal Headlight Bulb with 34 Clear Auxiliary LED Per Bulb - Reinforced multi-surfaced, aluminum reflector, anti-vibration design - Halogen bulb: HB2/9003 12V 65/55W, replaces H6017/H6024 - HB2/9003 Halogen headlight meets DOT/SAE standards, LED portion of the light for auxiliary/utility purposes such as park or turn signals.

Sold in a Pair

PART NUMBER:  HDL-316
1970 - 1976 Firebird 7" HID Xenon Headlight Set
Our Price: $199.95

7" High quality HID ( High Intensity Discharge ) Xenon HI LO conversion Kit with (Low Beam HID and High Beam Halogen light)  6000K Super White Models: H4/9003 H13 9004.  Complete set with projector lens and built in driving / turn signal led lights.  Get 300% more light than halogen bulbs and last up to 2500 hours of use.  Order this true HID head lamp kit today!

Sold in a Pair

PART NUMBER:  HDL-318
1970 - 1976 Headlight Assemblies Set, 7 Inch, G2 CREE LED Headlights Conversion HI LO Kit 2500LM
1970 - 1976 Headlight Assemblies Set, 7 Inch, G2 CREE LED Headlights Conversion HI LO Kit 2500LM
Our Price: $289.95
Sale Price: $269.00
You save $20.95!

7" High quality G2 LED Headlight 2500LM conversion Kit with Low Beam and High Beam lights for your Firebird. 6000K Super White 2nd generation CREE LED 42 watt headlights with aluminum alloy housing. Complete set with Reflector lens and built in park / turn signal led lights, simply wire into exsisting park lights. Check with your state for laws regarding street use. Order this NEW H4 G2 LED head lamp kit today! Slight modification to the headlamp bowl is required for installation. Sold in a complete set.

PART NUMBER: HDL-319
1970 - 1980 Center Console Gauge Mounting Pod
Our Price: $65.95

New center console gauge pod for your 70-80 firebird.  Unit mounts to the map pocket area of the console and houses three 2-1/16th  gauges.  As folks spend more money rebuilding their engines, be sure and run a good quality set of gauges and use this unit to house them while maintaining a factory style custom look!



Part Number: CON-2500
1970 - 1981 Billet Aluminum Hood Hinges (Polished)
Our Price: $659.95
Sale Price: $625.00
You save $34.95!

70 - 81 Billet aluminum hood hinge set without any ugly logos. These billet hood hinges are CNC machined to perfection adn made in the USA. They are made of 6061-T6 billet aluminum and utilize sealed bearings for smooth and long lasting operation. This product is polished to a show quality shine at a fraction of the cost compaired to other polished billet hood hinges. This is truly a great buy!!

USA MADE

PART NUMBER: SHE-1303
1970 - 1981 Bolt On 4-Link, Ride Tech
Our Price: $1,299.95

The Ridetech Bolt-On 4-Link installs onto the oem leaf spring mounts of your prized musclecar... no cutting, no fabrication, just 4 small tabs to weld to the axle for your upper bars. The ride height of your car is typically lowered by approximately 2”. The ride quality is dramatically improved over stock... instead of a wallowing soft ride you’ll experience a crisp, controlled ride quality that will inspire more confidence for performance driving. If you want your classic muscle car to ride and drive like a modern performance car, the Bolt-On 4-Link system is the perfect solution!

Part Number: SUS-472
1970 - 1981 Custom Steering Column Swivel Floor Mount
1970 - 1981 Custom Steering Column Swivel Floor Mount
Our Price: $119.95

This swivel floor mount makes installing a custom column in your classic 70 - 81 model simple and attractive.  The machined aluminum ball swivels for easy positioning of the column at virtually any angle.  Polished aluminum with satin back plate.  Fits all standard steering columns and tilt steering columns.

Part Number: STE-256
1970 - 1981 DSE Roll Bar Cage Kit
1970 - 1981 DSE Roll Bar Cage Kit
Our Price: $674.95

Our exclusive DSE design follows the interior lines of the car. It does not interfere with the interior comfort and packages close to the headliner and back window glass.

Note: This item must ship freight.

PART NUMBER: 011303
1970 - 1981 Firebird Inner Rear View Mirror Assembly ( Black )
Our Price: $54.95
Sale Price: $49.95
You save $5.00!

New BLACK interior mirror for your 70 - 81 Firebird.  Includes windshield slide mount bracket and adhesive to install.  Premium quality with original black frame and black textured backing.  Mirror has the day / night flipper like originals.  Order yours today.
Also Fits:  1970 - 1981 Firebird / Firebird
                1977 - 1982 Corvette
                1973 - 1979 Nova
                1978 - 1981 Chevelle / El Camino
                1978 - 1981 Monte Carlo

Part Number: INT-419B
1970 - 1981Polyurethane Rear Leaf Spring Bushings Kit
1970 - 1981 Firebird Polyurethane Rear Leaf Spring Bushings Kit ( Black )
Our Price: $79.95

Polyurethane front eye bushings and rear shackle bushings.  Be in control of your suspension while you're maneuvering through turns, doing drag-style launches, and braking.  These high performance leaf spring bushings are made of polyurethane, which is harder and stronger than rubber, but still not as hard as solid metal bushings.  These bushings add a higher level of performance and durability, and you'll feel the difference in positive handling and control.

*One kit does one car.  Premium quality.  

PART NUMBER: SUS-844B
1970 - 1981Polyurethane Rear Leaf Spring Bushings Kit
1970 - 1981 Firebird Polyurethane Rear Leaf Spring Bushings Kit ( RED )
Our Price: $79.95

Polyurethane front eye bushings and rear shackle bushings.  Be in control of your suspension while you're maneuvering through turns, doing drag-style launches, and braking.  These high performance leaf spring bushings are made of polyurethane, which is harder and stronger than rubber, but still not as hard as solid metal bushings.  These bushings add a higher level of performance and durability, and you'll feel the difference in positive handling and control.

*One kit does one car.  Premium quality.  

PART NUMBER: SUS-844
1970 - 1981 Rear Firebird Console Kit with Ashtray
1970 - 1981 Firebird Rear Seat Console Kit with Ashtray and Removable Cup Holder with (2) USB Ports
Our Price: $295.95

Brand New 70 - 81 Rear Console. This ultra cool option is finally available. Complete with ashtray and correct details this back seat console will upgrade any 2nd generation Firebird. Originally found on 72-77 Firebirds, but will fit all Firebird models 70-81. Comes in black vinyl only but can be dyed to match any interior color. Removable cup holder with 2 USB ports are included for those long rides with kids in the back. This cup holder can be removed and the ashtray inserted for the factory look. Look no more for this hard to find part, order yours today!!

PART NUMBER: CON-2279
1970-1981 Custom Rear Window Package Tray Speaker Shelf
1970 - 1981 Rear Window Package Tray Speaker Shelf, Custom
Our Price: $229.95

Comes in raw hand-laid fiberglass with a gel coat finish. Speaker covers are provided. Can be upholstered or painted with minimal skills. Super cool addition for 70 - 81 Firebird. Premium quality, made in the USA!

PART NUMBER: INT-903
1970 - 1981 Speed Tech Tubular Lower Control A-Arms Set
1970 - 1981 Speed Tech Tubular Lower Control A-Arms Set
Our Price: $659.00

The Tubular Lower Control Arms are CAD designed Mandrel Bent and all components are either laser cut or CNC machined for exact tolerances. They are made from 1.5" (DOM) drawn over mandrel seemless tubing with a wall thickness of .155. The control arms come complete powder coated with Acetron GP® type bushings and Energy Suspension™ Urethane Bump Stops.  

PART NUMBER: SUS-354
1970 - 1981 Speed Tech Tubular Upper Control A-Arms, Pair
1970 - 1981 Speed Tech Tubular Upper Control A-Arms, Pair
Our Price: $599.00

The Tubular Upper Control Arms are CAD designed Mandrel bent and all components are either laser cut or CNC machined for exact tolerances. They are made from 1.25" seemless tubing with a wall thickness of .125. The control arms come complete powder coated with stainless steel cross shafts, Acetron GP® type bushings and Energy Suspension™ Urethane Bump Stops. Sold as a matched pair of one left hand and one right hand.

PART NUMBER: SUS-352
1970-1972 Custom Rubber Floor Mats Set, Firebird Block Letters w/ Bird Emblem
1970-1972 Custom Rubber Floor Mats Set, Trans Am Block Letters w/ Bird Emblem
Our Price: $119.95

Custom rubber floor mats set.  Several colors to choose from.  Complete 4 piece kit.  Anti-slip grippers on the back side.  High-grade quality!  Please select your color from the drop-down menu.

Part Number : INT-2507A
1970-1973 Firebird Billet Tail Lamp Lenses
1970-1973 Billet Aluminum Tail Light Lens Set
Our Price: $439.95
CURRENTLY UNAVAILABLE

1970-1973 Pontiac Firebird Billet Tail Light Set.

CURRENTLY UNAVAILABLE

Part Number: LIG-2018B
1970-1973 Stainless Steel Fuel Tank Straps
Our Price: $54.95

Stainless steel fuel tank straps for 70-73 models. Sold as a pair only.

PART NUMBER: FUE-1002
1970-1974 Custom Rubber Floor Mats Set, Firebird Block Letters
1970-1974 Custom Rubber Floor Mats Set, Firebird Block Letters
Our Price: $119.95

Custom rubber floor mats set.  Several colors to choose from.  Complete 4 piece kit.  Anti-slip grippers on the back side.  High-grade quality!  Please select your color from the drop-down menu.

Part Number : INT-2508
1970-1974 Custom Rubber Floor Mats Set, Firebird Block Letters w/ Bird Emblem
1970-1974 Custom Rubber Floor Mats Set, Firebird Block Letters w/ Bird Emblem
Our Price: $119.95

Custom rubber floor mats set.  Several colors to choose from.  Complete 4 piece kit.  Anti-slip grippers on the back side.  High-grade quality!  Please select your color from the drop-down menu.

Part Number : INT-2507
1970-1976 "Muscle Lights" Headlights Set
1970-1976 "Muscle Lights" Headlights Set
Our Price: $129.95

New high performance headlights for your 70-76 model.  The H4 dual beam bulb is 60w low beam and 55w high beam.  The Xenon bulbs are 35% brighter than halogen, but the whiter light they produce is much more reflective than an incandescent or halogen.  These headlights are also available with a "city light".  This is an additional standard third beam 4 watt light.  A European version of the parking light.  It may also be used for a directional turn signal a daytime running light or a 20 watt LED mood light for cruising at dusk.  The best headlights for the money, bar none.  For an additional charge, you can choose to upgrade to "city lighting".  Please make your selection from the available drop-down menu.  Sold as a matched pair, does one car.

PART NUMBER:  HDL-315
1970-1980 Stereo or CD Player Console Map Pocket Adaptor
Our Price: $65.95

This new unit mounts in the map pocket section of your center console.  Installs quickly and allows you to run a CD player, amp or any device without modifications to your dash board.  Hand crafted here in the United States.  Fits all 70-80 Firebird or Trans Am models.  Works great for both automatic and 4 speed options.  CD player shown is for demo purposes only, and is not included.  Opening hole measures 2 1/8 tall and 7 1/8 inches wide.

Part Number: CON-2003A
1970-1981 Automatic Shift Plate Pattern Insert for Overdrive Transmission
1970-1981 Automatic Shift Plate Pattern Insert for Overdrive Transmission
Our Price: $10.95

New overdrive shift plate insert.  This a peel and stick polished plate for your 70-81.  This new insert is a great way to know what gear you are in!  For cars with a 4 speed automatic overdrive transmission.

PART NUMBER: CON-193
1970-1981 Billet Aluminum Door Jamb Vents
Our Price: $159.95

1970-1981 Billet Aluminum Door Jamb Vents. Pair

Part Number: INT-1604
1970-1981 Billet Aluminum Door Jamb Vents
Our Price: $159.95

1970-1981 Billet Aluminum Door Jamb Vents with Solid Center. Pair

Part Number: INT-1604L
1970-1981 Console Box Drink Holder
Our Price: $36.95

This new add-on fits directly into your center console box. It fits most drink sizes, and requires no modification to your console.

Part Number: CON-885
1970-1981 Custom Dash Gauge Housing Panel
Our Price: $199.95

New super cool custom gauge panel designed to work with all after market gauges with 3 3/8 and 2 1/16 inch diameter gauges.  Includes top mount plate, super easy to install.  All heater control, vent and switch openings in the correct locations.  Please dont forget to choose your desired finish; Black, Brushed silver (pictured), or carbon fiber look.

Part Number: DAS-2115
1970-1981 Custom Elliptical Door Handles
1970-1981 Custom Elliptical Door Handles
Our Price: $175.95

1970-1981 custom elliptical door handles with durable chrome plating.  These include 3 bezel inserts: carbon fiber, brushed aluminum and black.  Dimensions are 4.5" x 2".

Part Number: INT-1504
1970-1981 Custom Elliptical Door Handles
1970-1981 Custom Elliptical Door Handles
Our Price: $175.95

1970-1981 custom elliptical door handles with durable chrome plating.  These include 3 bezel inserts: carbon fiber, brushed aluminum and black.  Dimensions are 4.5" x 2".

Part Number: INT-1505
1970-1981 Custom Elliptical Door Handles
1970-1981 Custom Elliptical Door Handles
Our Price: $175.95

1970-1981 custom elliptical door handles with durable chrome plating.  These include 3 bezel inserts: carbon fiber, brushed aluminum and black.  Dimensions are 4.5" x 2".

Part Number: INT-1506
1970-1981 DSE Deep Wheel Housing Tubs
Our Price: $449.95

The DSE Deep tubs are inner wheel housings designed to accommodate wider tire and wheel packages including tires as wide as 335 mm.  They are designed for a perfect fit and retain a stock appearance. The DEEP TUBs are stamped from 18 gauge steel and made in the USA.  Includes Mini-tub Instructional Detroit Speed DVD.  Deep tubs will significantly reduce the number of hours required for a mini-tub project, and the mini-tub kit will maximize those savings.

Part Number: 040403
1970-1981 DSE Engine Mount Bracket Set
Our Price: $249.95

The DSE LSX engine mount kit enables easy, no hassle installation of any LSX engine into your subframe.  This kit locates the engine in the proper location.  Provides the correct method of adapting the 3-bolt engine mounts to the 4- bolt LSX engine and requires no fabrication.

Part Number: ENC-574
1970-1981 DSE Front Coil Springs with a 2 Inch Drop Height
Our Price: $209.95

New front coil springs for your 70-81 Firebird.  Exact fit for all small block Chevrolet or LS engines.  These feature a two inch drop so you can give your car the stance it deserves!

Part Number: SUS-234
1970-1981 DSE Speed Suspension Kit
Our Price: $2,109.95

Our exclusive Detroit Speed front suspension kits combine our individual products into a system designed for your vehicle. The DSE Speed Kit 1 provides the ease of bolt-on components to improve your Firebird’s handling.

Part Number: SUS-372
1970-1981 DSE Tubular Lower Control A-Arms With Stock Coil Spring Pocket
Our Price: $724.95

Detroit Speed's tubular lower control arms replace stock lower control arms on 1970-1981 Firebirds. These new tubular lower control arms are shipped complete with lower ball joints, steering stops, jounce bumpers and are ready to install on your car. Features include a robust tubular design with gussets and cross brace, Delrin bushings with steel housings and crush tubes, and a black powder coat finish. The geometry features include additional positive caster and a stock location spring pocket.

Part Number: SUS-348
1970-1981 DSE Tubular Upper Control A-Arm Pair
Our Price: $674.95

The Detroit Speed control arm kit is a complete and comprehensive package. DSE has done all the engineering and testing, and supplies all parts needed to complete the installation. All you will need to do is follow the instructions and supply the grease. Installation should take less than one day and should be followed by a professional alignment.

Part Number: SUS-345
1970-1981 Firebird Billet Aluminum Hood Hinges Pair
Our Price: $759.95

1970-1981 Firebird billet hood hinges made from the finest quality aluminum 6061 T6 and use weatherproof bearings and stainless steel hardware to ensure proper operation in any climate.  Engineered for smooth and effortless operation. Each hinge is machined to perfection in a manner which is fully functional and visually appealing as well. We offer these amazing billet hinges in three diffrent finishes: RAW, POLISHED, or Black ANODIZED. Please choose struts for either a fiberglass or steel hood.

Part Number: SHE-950
1970-1981 Power Rack & Pinion Cradle System
Our Price: $1,325.00

This new bolt-in rack and pinion cradle is available for both power and manual steering systems.  This unique new style of steering system utilizes the original inner and outer tie rod ends.  This makes for simple installation and maintains the original pivot position.  No cutting, welding or drilling to the chassis–it bolts into the existing steering box holes.  Easily converts this steering box application to rack and pinion steering without any modification.

Add your choice of a Polished, Paintable, or Black Powder Coated steering column to make a complete kit.  Adding a column upgrade with this kit will also include: universal joints, shafts, wiring harness with hazards, column mount, horn contact kit, horn relay and u-joint.

Part Number: STE-247
1970-1981 Speed Tech Firebird Pro Touring Suspension Kit
1970-1981 Speed Tech Firebird Pro Touring Suspension Kit
Our Price: $1,729.00

Speed Tech Performance offers the PRO TOURING suspension kit for the Ultimate Pro Touring Suspension setup. This combination will greatly improve the handling of your ride with the added feature for fine tuning your ride height and your bounce and rebound with the QA1 shocks. This kit is the best choice for the true performance minded that wants their car to handle superbly but yet still be enjoyable to drive. If you want to greatly improve the handling of your ride and insure that you have the ultimate suspension setup for a conventional spring coil combination under the most extreme driving conditions at still an reasonable price, then this kit is for you.

PART NUMBER: SUS-547
1970-1981 Speed Tech Firebird Road Assault Suspension Kit
1970-1981 Speed Tech Firebird Road Assault Suspension Kit
Our Price: $1,949.00

Speed Tech Performance offers the ROAD ASSAULT suspension kit for the Ultimate road/track suspension setup. This combination will greatly improve the handling of your ride with the added feature for fine tuning your ride height and your bounce and rebound with the QA1 shocks. This kit is the best choice for the true performance minded that wants their car to handle superbly but yet still be enjoyable to drive. If you want to greatly improve the handling of your ride and insure that you have the ultimate suspension setup for a conventional spring coil combination under the most extreme driving conditions at still an reasonable price, then this kit is for you.

PART NUMBER: SUS-549
1973 - 1974 DSE Selecta Speed Wiper Motor Kit Non Recessed Park
Our Price: $524.95

A downpour of rain will no longer hinder you ability to clearly see the road. This kit provides you with the performance and convenience of a late model wiper system in a package that easily and cleanly mounts in your car.

*Note: Modifications required for switch to fit in factory dash.

Part Number: WIN-103
1973 - 1974 Selecta-Speed Wiper Motor Kit, Recessed Park
Our Price: $599.95

A downpour of rain will no longer hinder you ability to clearly see the road. This kit provides you with the performance and convenience of a late model wiper system in a package that easily and cleanly mounts in your car.

*Note: Modifications required for switch to fit in factory dash.

Part Number: WIN-109
1973 - 1976 Trans Am Functional Flapper Shaker Hood Scoop Conversion Kit
Our Price: $154.95

This is an amazing new kit that wires directly to your fuse box on the ignition side.  This allows the shaker hood scoop flab to open like original 1970 - 1972 shaker hood scoops.  With this new kit you can allow air to flow in for improved performance and close to keep outside elements out of your 73 -76 Trans Am.  Designed with an electric solenoid for 12V current to improve durability.  This is an easy do-it-yourself kit  that wires directly to your fuse box so the flap opens when the engine is started.  Each kit comes complete with a detailed instruction manual with pictures and text.  You must use your original hood scoop or buy a new one, hood scoop is not included in this great kit.

*You can choose to add a Kick Down Switch and bracket to have the flap activated when stepping hard on the accelerator.  
*This switch is only needed on 4 speed cars and 75 - 76 models ( 73 and 74 cars with TH 400 already have this Kick Down Switch from the factory.)
**Fits ALL 1973 1974 1975 1976 models with a 400 or 455 engine.
**Can also be used with 70 - 72 models, call 1.859.624.1979 for more info

Part Number: SHE-2537
1973 - 1976 Trans Am Shaker Hood Scoop Rear Flapper Assembly
Our Price: $54.95

Replace your original Shaker Hood Block Off Plate with this functional flapper.  This flapper kit with allow fresh air to flow into the shaker hood scoop when the carburetor pressure is high or you are running at high speeds.  This flap is only activated by pressure.  The pressure produced by the carburetor will open the flap and close once the gas pedal is released.  The part GM forgot to make!  Order this amazing flapper kit today.

*Fits all 73 - 76 Trans Am Shaker Hood Scoops.  Can also work for 70 - 72 models, call 1.859.408.2005 for more info.

Part Number: SHE-2540
1970-1974 Custom Rubber Floor Mats Set, Trans Am Block Letters w/ Bird Emblem
1973-1974 Custom Rubber Floor Mats Set, Trans Am Block Letters w/ Bird Emblem
Our Price: $119.95

Custom rubber floor mats set.  Several colors to choose from.  Complete 4 piece kit.  Anti-slip grippers on the back side.  High-grade quality!  Please select your color from the drop-down menu.

Part Number : INT-2515
1974 - 1979 Dash Instrument Cluster Housing Panel, Without Pulse Windshield Wiper Option and With Air Conditioning, Turned Swirl Metal, Silver, GM Original Restored
1974 - 1979 Dash Instrument Cluster Housing Panel, With Pulse Windshield Wiper Option and Air Conditioning, Turned Swirl Metal, GM Original Restored, Gold
Our Price: $349.95
Please Call For Availibilty

Dash instrument cluster gauge housing panel with gold turned swirl metal finish and black top mounting plate.  This one is for cars with the "Pulse" windshield wiper option, and the air conditioning option. This is an original GM piece that has been restored. Fits 74 - 79 Firebird and Trans Am models.

Part Number: DAS-2114G
1974 - 1979 Dash Instrument Cluster Housing Panel without Gauges, Without Pulse Windshield Wiper Option and With Air Conditioning, Turned Swirl Metal, Gold, GM Original Restored
1974 - 1979 Dash Instrument Cluster Housing Panel, Without Pulse Windshield Wiper Option and With Air Conditioning, Turned Swirl Metal, GM Original Restored, Gold
Our Price: $299.95
Please Call For Availibilty

Dash instrument cluster gauge housing panel with gold turned swirl metal finish, black top mounting plate, and black outer trim edge bezel.  Does not have the "Pulse" windshield wiper option, but does have the air conditioning option.  This is an original GM piece that has been restored.  Fits 74 - 79 Firebird and Trans Ams.

Part Number: DAS-2116G
1974 - 1979 Dash Instrument Cluster Housing Panel without Gauges, Without Pulse Windshield Wiper Option and With Air Conditioning, Turned Swirl Metal, Silver, GM Original Restored
1974 - 1979 Dash Instrument Cluster Housing Panel, Without Pulse Windshield Wiper Option and With Air Conditioning, Turned Swirl Metal, GM Original Restored, Silver
This product is currently not available

Dash instrument cluster gauge housing panel with silver turned swirl metal finish and black top mounting plate. Does not have the "Pulse" windshield wiper option, but does have the air conditioning option. This is an original GM piece that has been restored. Fits 74 - 79 Firebird and Trans Ams.

Part Number: DAS-2116
1974 Stainless Steel Fuel Tank Straps
Our Price: $54.95

Stainless steel fuel tank straps for 74-75 models.  Sold as a pair only.

PART NUMBER: FUE-1003
1975 - 1977 DSE Selecta Speed Wiper Motor Kit Non-Recessed Park
Our Price: $524.95

A downpour of rain will no longer hinder you ability to clearly see the road. This kit provides you with the performance and convenience of a late model wiper system in a package that easily and cleanly mounts in your car.

*Note: Modifications required for switch to fit in factory dash.

Part Number: WIN-104
1975 - 1981 Overdrive Transmission Crossmember, 4L80E
Our Price: $259.95

New super heavy duty crossmember for your overdrive transmission.  Works great for all 4L80E transmissions.  Finished in a black powder coat.  Includes mounting hardware.  The best quality O/D crossmember we've found available.

PART NUMBER: TRA-818
1975 - 1981 Overdrive Transmission Crossmember, T56
Our Price: $229.95

New super heavy duty crossmember for your overdrive transmission.  Works great for T56 transmissions.  Finished in a black powder coat.  Includes mounting hardware.  The best quality O/D crossmember we've found available.

*Designed To Fit 93-97 Firebird or Firebird T56 Transmissions, all others would require modification to crossmember


PART NUMBER: TRA-817
1975 - 1981 Rear Window Glass Louver, ABS
Our Price: $349.95
Sale Price: $229.95
You save $120.00!

New custom Rear Window Louver 1 piece design for all 1975 - 1981 Firebird models. In complementing today's performance cars return to the past, we brought back one of the most popular accessory of the 60's, 70's and 80's for the Firebird with its ABS rear window louver. The ABS louvers are designed to keep your car cooler inside while making it look "COOL" on the outside and provide you some sense of privacy to the back seat area. Bring that classic muscle look back to your Camaro today.

PART NUMBER: DWN-561
1975 - 1981 Transmission Crossmember - G Force
Our Price: $229.95

New super heavy duty crossmember for your overdrive transmission.  Works great for all TH-350, Powerglide, Muncie M20, M21, M22, T-10, Super T-10 and Saginaw transmissions.  Finished in a black powder coat.  Includes mounting hardware.  The best quality crossmember we've found available.

PART NUMBER: TRA-814
1975 - 1981 Transmission Crossmember - G Force
Our Price: $229.95

New super heavy duty crossmember for your overdrive transmission.  Works great for all TH-400, TH200-4R transmissions.  Finished in a black powder coat.  Includes mounting hardware.  The best quality crossmember we've found available.

PART NUMBER: TRA-815
1975 - 1981 Transmission Crossmember - G Force
Our Price: $229.95

New super heavy duty crossmember for your overdrive transmission.  Works great for all 700R4, 4L60, and 4L60E transmissions.  Finished in a black powder coat.  Includes mounting hardware.  The best quality O/D crossmember we've found available.

PART NUMBER: TRA-816
1975-1977 DSE Selecta Speed Wiper Motor Kit Recessed
Our Price: $599.95

A downpour of rain will no longer hinder you ability to clearly see the road. This kit provides you with the performance and convenience of a late model wiper system in a package that easily and cleanly mounts.

*Note: Modifications required for switch to fit in factory dash.

Part Number: WIN-105
1975-1981 Custom Rubber Floor Mats Set, Firebird Block Letters
1975-1981 Custom Rubber Floor Mats Set, Firebird Block Letters
Our Price: $119.95

Custom rubber floor mats set.  Several colors to choose from.  Complete 4 piece kit.  Anti-slip grippers on the back side.  High-grade quality!  Please select your color from the drop-down menu.

Part Number : INT-2509
1975-1981 Custom Rubber Floor Mats Set, Firebird Block Letters w/ Bird Emblem
1975-1981 Custom Rubber Floor Mats Set, Firebird Block Letters w/ Bird Emblem
Our Price: $119.95

Custom rubber floor mats set.  Several colors to choose from.  Complete 4 piece kit.  Anti-slip grippers on the back side.  High-grade quality!  Please select your color from the drop-down menu.

Part Number : INT-2510
1975-1981 Custom Rubber Floor Mats Set, Trans Am Block Letters w/ Bird Emblem
1975-1981 Custom Rubber Floor Mats Set, Trans Am Block Letters w/ Bird Emblem
Our Price: $119.95

Custom rubber floor mats set.  Several colors to choose from.  Complete 4 piece kit.  Anti-slip grippers on the back side.  High-grade quality!  Please select your color from the drop-down menu.

Part Number : INT-2516
1975-1981 Custom Rubber Floor Mats Set, Trans Am Block Letters w/ Bird Emblem
1975-1981 Custom Rubber Floor Mats Set, Trans Am SE Bandit Block Letters w/ Bird Emblem
Our Price: $149.95
Sale Price: $139.95
You save $10.00!

Custom rubber floor mats set. These only come in the color black.  Complete 4 piece kit.  Anti-slip grippers on the back side.

Part Number : INT-2516A
1976 - 1981 Firebird ( 5 ) Leaf Multi Leaf Springs ( Pair ) Premium Quality  Factory Height
1976 - 1981 Firebird ( 5 ) Leaf Multi Leaf Springs ( Pair ) Premium Quality Factory Height
Our Price: $289.95

These USA Made multi-leaf springs are made of the original GM blue prints to give you the factory height.  The springs have a tapered leaf and rolled edges with an anti-friction pad between each leaf to help provide a smooth ride.  Rolled ends gradually decrease in thickness.  The reduced thickness at the ends allow for increased flexibility of the leaf end, resulting in reduced stress and interleaf friction.  Rolled ends produce the smoothest acting spring.  

Fits 76-81 Models

PART NUMBER: SUS-682
1976-1981 Stainless Steel Fuel Tank Straps
Our Price: $54.95

Stainless steel fuel tank straps for 76-81 models.  Sold as a pair only.

PART NUMBER: FUE-1001
1977 - 1981 Trans Am Functional Flapper Shaker Hood Scoop Conversion Kit for Pontiac Engines
Our Price: $154.95

This is an amazing new kit that wires directly to your fuse box on the ignition side.  This allows the shaker hood scoop flab to open like original 1970 - 1972 shaker hood scoops.  With this new kit you can allow air to flow in for improved performance and close to keep outside elements out of your 77 -81 Trans Am.  Designed with an electric solenoid for 12V current to improve durability.  This is an easy do-it-yourself kit  that wires directly to your fuse box so the flap opens when the engine is started.  Each kit comes complete with a detailed instruction manual with pictures and text.  You must use your original hood scoop or buy a new one, hood scoop is not included in this great kit.

*You can choose to add a Kick Down Switch and bracket to have the flap activated when stepping hard on the accelerator.  
**Fits ALL 1977 1978 1979 1980 1981  models with pontiac engines.  
**Will NOT fit the early production short 1977 hood scoops.

Part Number: SHE-2538
1977 - 1981 Trans Am Functional Shaker Hood Scoop Conversion Kit for 403 Olds
Our Price: $154.95

This is an amazing new kit that wires directly to your fuse box on the ignition side.  This allows the rear of your shaker hood scoop flab to open like original 1970 - 1972 shaker hood scoops.  With this new kit you can allow air to flow in for improved performance and close to keep outside elements out of your 77 -81 Trans Am.  Designed with an electric solenoid for 12V current to improve durability.  This is an easy do-it-yourself kit  that wires directly to your fuse box so the flap opens when the engine is started.  Each kit comes complete with a detailed instruction manual with pictures and text.  You must use your original hood scoop or buy a new one, hood scoop is not included in this great kit.

*You can choose to add a Kick Down Switch and bracket to have the flap activated when stepping hard on the accelerator.  
**Fits ALL 1977 1978 1979 1980 1981  models with the 403 Oldsmobile engine.  
**Will not fit the early production short 1977 hood scoops.  

Part Number: SHE-2539
1977 - 1981 Trans Am Shaker Hood Scoop Rear Flapper Assembly
Our Price: $54.95

Replace your original Shaker Hood Block Off Plate with this functional flapper.  This flapper kit with allow fresh air to flow into the shaker hood scoop when the carburetor pressure is high or you are running at high speeds.  This flap is only activated by pressure.  The pressure produced by the carburetor will open the flap and close once the gas pedal is release.  Order this amazing flapper kit today

*Fits all 1977 - 1981 Trans Am shaker hood scoops, will NOT fit the early production short 77 hood scoop.

Part Number: SHE-2540B
1978 DSE Selecta Speed Wiper Motor Kit Non-Recessed Park
Our Price: $524.95

A downpour of rain will no longer hinder you ability to clearly see the road. This kit provides you with the performance and convenience of a late model wiper system in a package that easily and cleanly mounts in your car.

*Note: Modifications required for switch to fit in factory dash.

Part Number: WIN-106
1978 DSE Selecta Speed Wiper Motor Kit Recessed Park
Our Price: $599.95

A downpour of rain will no longer hinder you ability to clearly see the road. This kit provides you with the performance and convenience of a late model wiper system in a package that easily and cleanly mounts in your car.

*Note: Modifications required for switch to fit in factory dash.

Part Number: WIN-107
1979 - 1981 Firebird / Trans Am Headlight Cover Black Outs ( 4 Piece Set )
1979 - 1981 Firebird / Trans Am Headlight Cover Black Outs ( 4 Piece Set )
Our Price: $89.95

1979-1981 Firebird / Trans Am Head light covers. This set can be installed in seconds. Add that custom muscle look to any 79-81 Firebird while covering up those old cracked-up lens. No drilling required, easy to remove and clean.  This easy add on will increase the aerodynamics and the look of your Firebird, order yours today!!

For All 79-81 Firebird Models

PART NUMBER LIG-2236
1979 Front Bucket Seat Covers Pair, 10th Anniversary
Our Price: $599.95

New correct style front bucket seat covers for your 79 tenth anny.  Sierra grain vinyl with leather inserts, just like originals.  Silver leather with Firebird embroidery on the upper seat.    All are made with OEM quality materials, original grain patterns and true factory colors.  Show quality.  Sold as a left hand and right hand set only.  Does both driver and passenger seats.

Part Number: INT-2099
1979 Rear Seat Cover Set, 10th Anniversary
Our Price: $579.95

New correct style rear seat covers for your tenth anny.  Sierra grain vinyl with leather inserts, just like originals.  Silver leather with Firebird embroidery on rear seat.    All are made with OEM quality materials, original grain patterns and true factory colors.  Show quality.

Part Number: INT-2100
1979-1981 DSE Selecta Speed Wiper Motor Kit Recessed Park
Our Price: $599.95

A downpour of rain will no longer hinder you ability to clearly see the road. This kit provides you with the performance and convenience of a late model wiper system in a package that easily and cleanly mounts in your car.

*Note: Modifications required for switch to fit in factory dash.

Part Number: WIN-108
1980 - 1981 Dash Instrument Cluster Housing Panel without Gauges, With Pulse Windshield Wiper Option and With Air Conditioning, Turned Swirl Metal, Gold, GM Original Restored
1980 - 1981 Dash Instrument Cluster Housing Panel, With Pulse Windshield Wiper Option and Air Conditioning, Turned Swirl Metal, GM Original Restored, Gold

Dash instrument cluster gauge housing panel with gold turned swirl metal finish, black top mounting plate, and black bezel. Has the "Pulse" windshield wiper option as well as air conditioning vent holes. This is an original GM piece that has been restored. Fits 80 - 81 Firebird and Trans Ams. Part Number: DAS-2117G

ITEM CURRENTLY UNAVAILABLE. PLEASE CALL FOR DETAILS.
1982-1984 Custom Rubber Floor Mats Set, Firebird Block Letters
1982-1984 Custom Rubber Floor Mats Set, Firebird Block Letters
Our Price: $119.95

Custom rubber floor mats set.  Several colors to choose from.  Complete 4 piece kit.  Anti-slip grippers on the back side.  High-grade quality!  Please select your color from the drop-down menu.

Part Number : INT-2512
1982-1984 Custom Rubber Floor Mats Set, Firebird Block Letters w/ Bird Emblem
1982-1984 Custom Rubber Floor Mats Set, Firebird Block Letters w/ Bird Emblem
Our Price: $119.95

Custom rubber floor mats set.  Several colors to choose from.  Complete 4 piece kit.  Anti-slip grippers on the back side.  High-grade quality!  Please select your color from the drop-down menu.

Part Number : INT-2511
1982-1984 Custom Rubber Floor Mats Set, Trans Am Block Letters w/ Bird Emblem
1982-1984 Custom Rubber Floor Mats Set, Trans Am Block Letters w/ Bird Emblem
Our Price: $119.95

Custom rubber floor mats set.  Several colors to choose from.  Complete 4 piece kit.  Anti-slip grippers on the back side.  High-grade quality!  Please select your color from the drop-down menu.

Part Number : INT-2517
1982-1992 Black Anodized Billet Aluminum Door Jamb Vents
Our Price: $199.95

New custom black anodized billet aluminum door jamb vents with raw mesh inserts.


Part Number: INT-2205
1982-2002 Chambered Exhaust Set
Our Price: $695.00

Designed and made in the USA, from high grade T-304 stainless steel.  Original classic chambered design.  Three inch intermediate into two true dual transverse chambered sections with 2 3/4 inch polished angle cut tips.  Installs at all factory mounting locations.  Includes mounting clamps and hardware.  Wonderful deep sound with improved horsepower.  The perfect exhaust package for your 82-02 bird.

Part Number: FUE-640
1984 - 2002 Hurst Ebony Leather Shifter Knob for 5 or 6 Speed
Our Price: $79.95

New super cool manual transmission Hurst shifter knob for 84 - 02 models.  Features high grade leather with real stitching.  Embossed "H" Hurst logo.  Looks great!

PART NUMBER: TRA-739
1985-1992 Custom Rubber Floor Mats Set, Firebird Block Letters
1985-1992 Custom Rubber Floor Mats Set, Firebird Block Letters
Our Price: $119.95

Custom rubber floor mats set.  Several colors to choose from.  Complete 4 piece kit.  Anti-slip grippers on the back side.  High-grade quality!  Please select your color from the drop-down menu.

Part Number : INT-2514
1985-1992 Custom Rubber Floor Mats Set, Firebird Block Letters w/ Bird Emblem
1985-1992 Custom Rubber Floor Mats Set, Firebird Block Letters w/ Bird Emblem
Our Price: $119.95

Custom rubber floor mats set.  Several colors to choose from.  Complete 4 piece kit.  Anti-slip grippers on the back side.  High-grade quality!  Please select your color from the drop-down menu.

Part Number : INT-2513
1985-1992 Custom Rubber Floor Mats Set, Trans Am Block Letters w/ Bird Emblem
1985-1992 Custom Rubber Floor Mats Set, Trans Am Block Letters w/ Bird Emblem
Our Price: $119.95

Custom rubber floor mats set.  Several colors to choose from.  Complete 4 piece kit.  Anti-slip grippers on the back side.  High-grade quality!  Please select your color from the drop-down menu.

Part Number : INT-2518
1986-1992 Polished Valve Cover Set
Our Price: $289.95

Correct center bolt valve cover set.  Fits all Pontiac V8 engines.  High polished aluminum valve covers.  Show car ready, excellent quality!

Part Number: ENC-421
1987 - 1990 Gold Headlamp Nameplate "PONTIAC" Pontiac Trans Am GTA & Turbo Trans Am Emblem
1987 - 1990 Gold Headlamp Nameplate "PONTIAC" Pontiac Trans Am GTA & Turbo Trans Am Emblem
Our Price: $19.95

This new emblem is used on 1987 - 90 Pontiac Trans Am GTA & Turbo Trans Am.  It is a specific shaped GOLD "PONTIAC"  Headlamp nameplate.  Replaces original GM part # 10053028.   Listed with the W/ Y84 option.  Easy install, just peel and stick.

This is a long discontinued part.. Order yours today!!

Fits 87 88 89 and 90 Models

Part Number: EMB-2112
91 & 92 GTA Front Nose Emblem
1987-92 Pontiac Trans Am GTA "GTA TRANS AM" Fender Emblem
Our Price: $59.95

1987-92 Pontiac Trans Am GTA "GTA TRANS AM" Fender Emblem.  Choose frome factory colors: White, Black, Gunmetal Gray or Bright Red.  Premium quality automobile grade backing that peels and sticks staight to the fender.  This design does not have the pins on the back which makes it easy to install.  This is a GM Licensed Reproduction part.


Part Number: EMB-2111
1998-2002 Exhaust System, "Loud Mouth II" LS1 with 4" Tips
1998-2002 Exhaust System, "Loud Mouth II" LS1 with 4" Tips
Our Price: $429.95

F-Body cat-backs have always been the best performing exhaust systems in the business. Now they're the most versatile, too! Using our industry-exclusive modular design architecture, we've developed a line of systems that can be quickly reconfigured to fit changing performance, noise level, and sound quality requirements. Simply loosen a few band clamps, swap muffler types, retighten, and you're done. No other exhaust offers this level of performance and adaptability!

Along with the included race muffler, the F-Body Loud Mouth II™ system is compatible with our original Loud Mouth™ resonator (#31066). Get both for complete control over your car's sound and performance characteristics.

NOTE: Includes a Loud Mouth II™ race muffler. Loud Mouth™ resonator sold separately.


PART NUMBER: FUE-1211F
Billet Gauge Bezel Set
Our Price: $194.00

This set of billet gauge bezels comes with (2) 5" and (4) 2-5/8" gauges.  Super sharp! Choose between Polished, Brushed, or Black Anodized.

Part Number: DAS-538
Billet Gauge Bezel Set (2) 5" and (4) 2-1/16"
Our Price: $178.00

Billet Gauge Bezel Set (2) 5" and (4) 2-1/16".  Choose from polished, brushed or black anodized.

Part Number: DAS-539
CarCapsule Clear Bubble System, 1967 - 2002 Firebird
Our Price: $369.95

The indoor CarCapsule is a clear vinyl “bubble” that completely covers and protects your vehicle from dings, dirt, dust, corrosion, mildew, musty odors, rust, rodents, and even fingerprints that slowly turn it from new to old.
PART# GIF-700
Console 5 Speed Shift Pattern Plate
Our Price: $29.95

New super cool 5 speed shift pattern plate. Easy to mount anywhere you like. Will work for 1967-2002 models. Measures 1 1/2 inches wide and 3 7/8 inches tall.  

PART NUMBER: CON-898
Console 6 Speed Shift Pattern Plate
Our Price: $29.95

New super cool 6 speed shift pattern plate. Works great on any 1967-2002 model. Measures 1 1/2 inches wide and 3 7/8 inches tall.  

PART NUMBER: CON-899
Custom "LS1" Emblem
Our Price: $35.95

New custom "LS1" emblem for your mean machine.  High grade peel and stick backing.  Installs in seconds anywhere you like.  Measures 5 inches left to right.  1.25 inches tall at the largest point.  Show car ready!

Part Number: EMB-1013
Custom Bent Shaft Shifter Handle, Fixed Base for Manual Transmission
Custom Bent Shaft Shifter Handle, Fixed Base for Manual Transmission
Our Price: $99.95

Custom bent shaft shifter handle with fixed base for manual transmissions.  These shifter handles are designed to mount on to any Hurst Competition Plus shifter with the two lower side bolts.

Part Number: TRA-836
Custom Billet Aluminum Shifter Knob w/ "DSE" Logo, 3/8" Thread
Our Price: $49.95

New super cool DSE shifter knob for your ride. Heavy billet aluminum, comes black anodized with DSE logo laser etched on the top. This is a great addition to the pro touring machine you have been building.  It fits all shifter handles with 3/8" thread pattern. Looks great in any car and feels wonderful in your hand!. PART NUMBER: TRA-485
Custom Billet Dash Gauge Bezels Set (2) 3-3/8" and (4) 2-1/16" Polished, Brushed, or Black Anodized
Our Price: $179.95

New super cool custom dash gauge bezels trim set.  This package includes two 3-3/8 inch and four 2-1/16 inch in diameter bezels.  Easy to install, simply snap over your existing guage assembly.  Designed and tooled from high grade billet aluminum.  Please specify your desired finish: Polished, Brushed, or Black Anodized.

DAS-545
Custom Billet Gage Bezel Dash Pak 2 3-3/8 and 4 2-1/16 Polished or Brushed
Our Price: $179.95

Custom Billet Gage Bezel Dash Pak 2 3-3/8 and 4 2-1/16 Polished or Brushed.  Please specify finish.

Part Number: 40055
Custom Billet Gauge Bezel 2-1/16 Polished or Brushed
Our Price: $29.95

Custom Billet Gauge Bezel 2-1/16 inches.  Please specify finish, Polished or Brushed.

Part Number: 40017
Custom Chrome Aluminum Inner Door Handles, Pair
Custom Chrome Aluminum Inner Door Handles, Pair
Our Price: $39.95

These new chrome aluminum inner window crank handles are a great way to personalize any bird.  Works great for any 67 - 02 firebird or trans am with crank windows.  4 and 1/4  inches in length.  Sold as a pair.  Includes installation hardware.

Part Number: INT-1061
Custom Chrome Dome Light Assembly
Our Price: $55.95

Custom chrome dome light assembly with frosted lens.  Very nice!  Dimensions are 4.5" x 2" x 0.75".  Includes wiring harness for connection.

Part Number: INT-1503
Custom Emblem, "cross-fire-injection" Each
Custom Emblem, "cross-fire-injection" Each
Our Price: $49.95

Beautiful new emblem for your Firebird. High grade plating with black inner details. Stud mount or double sided tape is included. Awesome piece at an awesome price, Nice!

PART NUMBER: EMB-947
Custom Shifter Handle 25 Degree Bend with Adjustable Base for Manual Transmission
Custom Shifter Handle 25 Degree Bend with Adjustable Base for Manual Transmission
Our Price: $139.95

Available in 10" bent style, these sticks help you adapt late model transmissions with top mount, internal rail shifters to your old muscle car.  Examples include oe style Hurst, T56, TKO600, Richmond, etc.  The included three inserts allow mounting of the stick in any of seven fore/aft positions. You can adjust shifter ball position towards you or away from you for improved ergonomics.  This product WILL make you a better, and more comfortable driver.  Transmission brand or model does not matter as long as your shifter has a flat stub with two bolt holes that are .875"-.900" apart.  The stub is the part of the shifter that our stick bolts to.

CNC machined from 6061-T6 aluminum, ProStyle™ Shifter Sticks are styled to match our other billet aluminum accessories such as core support bars, cowl induction trim plates, and gauge bezels.  Used together, these parts help you carry a distinctive styling theme throughout your car.  ProStyle™ Shifter Sticks fit all factory and aftermarket stub style manual transmission shifters with .875”-.900” bolt spacing.  Comes with three inserts as well as 3/8”, 8mm and 10mm hardware.

Height is about 10 inches , can be polised or black anodized, adjustable to fit you !!  Order today!!

PART NUMBER: TRA-837
Custom Shifter Knob with " TRANS AM " on Bird Logo , Black
Our Price: $29.95

New custom shift knob for your classic.  This knob has a slight bit larger grip over stock unit, it measures 2 & 1/8 inches diameter.  Thread size where it installs onto your shifter handle is 3/8.  Works great for all manual transmissions with a 3/8 inch coarse thread pattern.  Super cool custom knob that can be added in minutes.  Excellent quality, made in the USA.

PART NUMBER: TRA-2064
Custom Shifter Knob with " TRANS AM " on Bird Logo , White
Our Price: $29.95

New custom shift knob for your classic.  This knob has a slight bit larger grip over stock unit, it measures 2 & 1/8 inches diameter.  Thread size where it installs onto your shifter handle is 3/8.  Works great for all manual transmissions with a 3/8 inch coarse thread pattern.  Super cool custom knob that can be added in minutes.  Excellent quality, made in the USA.

PART NUMBER: TRA-2063
Custom Shifter Knob with Firebird Logo, Black - 3/8
Our Price: $29.95

New custom shift knob for your classic.  This knob has a slight bit larger diameter over stock unit, it measures 2 & 1/8 inches overall.  Thread size where it installs onto your shifter handle is 3/8.

PART NUMBER: TRA-2062
Custom Shifter Knob with Firebird Logo, White
Our Price: $29.95

New custom shift knob for your classic.  This knob has a slight bit larger diameter over stock unit, it measures 2 & 1/8 inches overall.  Thread size where it installs onto your shifter handle is 3/8.

PART NUMBER: TRA-2061
Custom Window Crank Handle Banjo
Custom Window Crank Handle Banjo
Our Price: $12.95

Banjo custom window crank handle with black knob.  Works with 1967 - 2002 models.  Sold each.

PART NUMBER: INT-357
Electronic Speedometer Conversion Sending Unit
Electronic Speedometer Conversion Sending Unit
Our Price: $89.95

Correct unit to convert your old roll type speedo to the new more common electronic display speedometers.  This super handy unit is only needed if your upgrading to custom gauges, such as autometer, etc.

PART NUMBER: DAS-534
Exhaust Tip Custom Stainless Steel - Each
Our Price: $34.95

New stainless steel custom exhaust tips for your firebird.  Inlet is 2 1/2 inch diameter.  Rectangular outlet measures 7 and 7/8 inches wide and 2 inches tall.  Premium quality polished stainless steel design!  Show car ready.

Part Number: FUE-987
Exhaust Tip Side Inlet Custom Stainless Steel - Each
Exhaust Tip Side Inlet Custom Stainless Steel - Each
Our Price: $34.95

New stainless steel custom exhaust tips for your Firebird.  Inlet is 2 1/4 inch diameter.  Rectangular outlet measures 7 and 1/2 inches wide and 2 inches tall.  Premium quality polished stainless steel design!  Show car ready.

PART NUMBER: FUE-988
Fender Cover Firebird Logo
Our Price: $21.95

This is a must have for any restorer or weekend mechanic. The Pontiac Firebird fender gripper fender cover is a non-slip soft cushion product. Your tools and other items will grip to the cover and not damage the paint. The fender cover is impervious to oil, coolant, lacquer thinner or brake fluid. Sold each.


Part Number: GIF-2001D
Fender Cover General Motors Logo
Our Price: $21.95

This is a must have for any restorer or weekend mechanic. The Pontiac Firebird fender gripper fender cover is a non-slip soft cushion product. Your tools and other items will grip to the cover and not damage the paint. The fender cover is impervious to oil, coolant, lacquer thinner or brake fluid.

Part Number: GIF-233F
Fender Cover Heritage Pontiac Logo
Our Price: $21.95

This is a must have for any restorer or weekend mechanic. The Pontiac Firebird fender gripper fender cover is a non-slip soft cushion product. Your tools and other items will grip to the cover and not damage the paint. The fender cover is impervious to oil, coolant, lacquer thinner or brake fluid. Sold each.


Part Number: GIF-2001B
Fender Cover Pontiac Logo
Our Price: $21.95

This is a must have for any restorer or weekend mechanic. The Pontiac Firebird fender gripper fender cover is a non-slip soft cushion product. Your tools and other items will grip to the cover and not damage the paint. The fender cover is impervious to oil, coolant, lacquer thinner or brake fluid. Sold each.

Part Number: GIF-2001A
Fender Cover Trans Am Logo
Our Price: $21.95

This is a must have for any restorer or weekend mechanic. The Pontiac Firebird Trans Am fender gripper fender cover is a non-slip soft cushion product. Your tools and other items will grip to the cover and not damage the paint. The fender cover is impervious to oil, coolant, lacquer thinner or brake fluid. Sold each.


Part Number: GIF-2001C
Firebird Custom Billet Door Lock Knobs - Smooth
Our Price: $21.95

Machined from 6061-T6 billet aluminum. Sold in pairs.

PART NUMBER: INT-1607
Firebird Custom Profile Dimmer Switch Cover - Black Anodized
Our Price: $15.95

New super cool custom dimmer switch cover for your firebird.  Just slide over your dimmer switch and tighten the set screw.  Add a touch of class in seconds.  This version is black anodized and features a ribbed top.

PART NUMBER: DAS-1003A
Firebird Custom Profile Dimmer Switch Cover - Black Anodized - Smooth
Our Price: $15.95

New super cool custom dimmer switch cover for your firebird.  Just slide over your dimmer switch and tighten the set screw.  Add a touch of class in seconds.  This version is black anodized and features a smooth top.

PART NUMBER: DAS-1002A
Firebird Custom Profile Dimmer Switch Cover - Polished
Our Price: $15.95

New super cool custom dimmer switch cover for your firebird.  Just slide over your dimmer switch and tighten the set screw.  Add a touch of class in seconds.  This version is polished and features a ribbed top.

PART NUMBER: DAS-1003P
Firebird Custom Profile Dimmer Switch Cover - Polished - Smooth
Our Price: $15.95

New super cool custom dimmer switch cover for your firebird.  Just slide over your dimmer switch and tighten the set screw.  Add a touch of class in seconds.  This version is polished and features a smooth top.

PART NUMBER: DAS-1002P
Firebird Custom Universal Billet Dash Knobs, Classic
Firebird Custom Universal Billet Dash Knobs, Classic
Our Price: $12.95

Universal Dash Knobs work great to add that extra touch to your dash. 3/16” bore with set screw make for an easy fit.

PART NUMBER: DAS-1018A
Firebird Custom Universal Billet Dash Knobs, Smooth
Firebird Custom Universal Billet Dash Knobs, Smooth
Our Price: $12.95

Universal Dash Knobs work great to add that extra touch to your dash. 3/16” bore with set screw make for an easy fit.

PART NUMBER: DAS-1018C
Full Adjustable Accelerator Assembly with Carburetor Linkage
Full Adjustable Accelerator Assembly with Carburetor Linkage
Our Price: $199.95

New gas pedal assembly with thru firewall linkage set.  This new linkages offers smooth as silk operation and comes black powder coated for a long lasting rust free life.  Mounts like a factory gas pedal setup but offers a 6 way adjustment to get things aligned just right.  With added features like the quick disconnect make this pedal assembly a no brainer.  Exact fit for all 67-69 models and can be adapted to fit several others.

Order Yours Today!!

PART NUMBER: ACL-36
Hurst Pistol Grip Shifter Handle Black Anodized
Hurst Pistol Grip Shifter Handle Black Anodized
Our Price: $79.95

New super cool Hurst pistol grip handle shifter knob. Features the old school HURST logo. Made from solid die-cast aluminum and features a beautiful black anodized coating. Premium quality strength and durability. This one works great with all 3/8 - 16 threaded shifter handles. Includes jam nut for proper fit and adjustment. Feels great and looks even better! Super smooth!!!

Part Number: TRA-568
Hurst Pistol Grip Shifter Handle Natural Finish
Our Price: $89.95

New super cool pistol grip shift handle.  Fits all competition plus 3/8-16 shifter
handles.  Feels great in you hand and looks even better!

Part Number: TRA-567
Hurst Reverse Backup Light Switch and Bracket
Our Price: $34.95

New custom reverse back up light switch and bracket.  Designed to mount on the rear stop bolt on your Hurst competition plus shifter.  No need to worry about factory swivels, brackets or rods with this new super handy kit.  Includes instructions and hardware.

PART NUMBER: DAS-304
Hurst Wheels Complete Set
Hurst Wheels Complete Set
Our Price: $2,295.00

New vintage Hurst wheels set for your Classic.

Complete Kit Includes:
- (4) 14 x 6 Wheels
- (4) Correct Deep Chrome Trim Rings
- (4) Center Caps with Exact Hurst Logos
- (20) OE Style Lug Nuts

These super rare wheels were originally marketed by Hurst in the late 60's and early 70's.  They look great on any vehicle.

PART NUMBER: WHE-760
HushMat Ultra Silver Foil Floor Kit with Damping Pad - 20 Piece Kit
HushMat Ultra Silver Foil Floor Kit with Damping Pad - 20 Piece Kit
Our Price: $239.95

Make your Firebird ultra quiet and cool with this Hushmat kit. Vibration Damping & Thermal Insulation Material is a 1/8” thick and 0.47-0.50 lb per square foot pressure-sensitive, constrained-layer damping material which has excellent adhesion for many difficult to-bond-to substrates such as oily steel, automotive E-coat, primers, finishes, laminated and chopper-gun fiberglass and many plastics, including polypropylene. The aluminum foil constraining layer and specially formulated visco-elastic polymer layer combine to give effective vibration damping and outstanding thermal insulating properties over a wide temperature range. HushMat Ultra, through its proprietary chemistry, provides outstanding thermal insulation for hot firewall, trunk floor over the hot exhaust and tunnel applications. Enjoy the Cool, Quiet and Comfortable ride with HushMat.
 
Sold in a 39 square foot kit. (20) Sheets 12" x 23" Ultra Damping/Insulating
Part Number: INT-1043
HushMat Ultra Sound Deadening and Thermal Insulation Material Cargo Kit, Silver - 16 Piece Kit
HushMat Ultra Sound Deadening and Thermal Insulation Material Cargo Kit, Silver - 16 Piece Kit
Our Price: $229.95
Sale Price: $209.95
You save $20.00!

Specifically formulated light weight thermo acoustic rubber designed for optimum automotive thermal insulation and sound deadening. Packaged in 16 easy to handle and install approx. 1.91 foot square sheets, which conform to uneven surfaces and can be easily cut with household scissors (if necessary). Each sheet is slightly less than 1/8” thick and light weight at approximately 0.50 pounds per square foot. Material is silver in color. Contains sixteen (16) 12" x 23" Ultra Damping Pads (31 sq. ft. / 2.9 sq. ft.). Thickness is 1.5 mm. 
 PART NUMBER: INT-1043T
Individual Emblem Number "5" White
Our Price: $16.95

Individual number "5" emblem in color white.  Easy to mount and includes double sided tape.  Measures about 1-3/8 inches wide and 5/8 inches tall.  Ready to rock!

PART NUMBER: EMB-173
Mark of Excellence "GM" Chrome Emblem
Mark of Excellence "GM" Chrome Emblem