QA1's Drag "R" Series Stocker Star shock absorbers are designed with drag racing in mind.  With 18 valving options for rebound and a firm compression, you can't go wrong.  Sold each.

PART NUMBER: SUS-1111C

• Internal Design = Twin-tube
• Adjustable = Yes
• Gas Charged = No
• Bushing Material = Polyurethane
• Bushing Color = Black
• Boot Included = No
• Extended Length (in) = 13.500 in.
• Collapsed Length (in) = 8.750 in.
• Body Diameter (in) = 2.000 in.
• Upper Mount = Stud
• Lower Mount = Tie bar
• Quantity = Sold individually
• Notes: Some front applications may require the lower a-arm to be dropped for installation. Body diameter may be too large to allow mounting from the bottom. Some control arm's shock openings may need to be enlarged to accept a QA1 shock.
• Stud mounts are measured to the shoulder of the stud. Add 13/16" for installed compressed length per stud mount. Loops and t-bars are measured to the center of the loop. Lengths may vary slightly.
• Due to deviations from the factory ride heights, it may be necessary to check the actual ride height of your particular applications. See our Tech section for information on measuring proper ride height.